Aleratec 116 USB 30 Copy Tower Duplicator User Guide
Here you can view all the pages of manual Aleratec 116 USB 30 Copy Tower Duplicator User Guide. The Aleratec manuals for Hard Disk are available online for free. You can easily download all the documents as PDF.
Page 31
www.aleratec.com27 Using the USB Dupli\ccation Suite Softwa\cre 3. Once the DOS windows have closed, you may exit the module.
Page 32
www.aleratec.com28 Using the USB Dupli\ccation Suite Softwa\cre Port Training Port Training is used to align the USB port numbers in the software with the USB ports on the front of your duplicator. For best results in using your Aleratec USB 3.0 Copy Tower we recommend performing a Port Training prior to the start of a new copy job. 1. Start by choosing Port Training from the drop down menu. 2. A new dialog box will pop-up prompting you to remove all USB flash drives form the duplicator. Click...
Page 33
www.aleratec.com29 Using the USB Dupli\ccation Suite Softwa\cre 3. You will now be asked to Insert a USB flash drive into port 1. 4. Insert a USB flash drive into port 1 and a message stating “Port 1 learned” will be displayed along with a message asking to “Insert USB flash drive into port 2.”
Page 34
www.aleratec.com30 Using the USB Dupli\ccation Suite Softwa\cre 5. Repeat this process until all 16 ports of your duplicator are trained. Then press “Complete” to continue. 6. After performing Port Training the designation for USB Flash Drives will change from Window Drive Letters (D,E, F, etc.) to USB-01, USB- 02, USB-03, etc. Note: \b\fe to the hardware\s differences between US\sB 2.0 and USB 3.0 fl\sash drives, if yo\f train a port \fsing\s a USB 3.0 drive, it\s will only...
Page 35
www.aleratec.com31 Technical Support After reading this Software User Guide, if you need additional assistance, please contact Aleratec Technical Support. Our technical staff will be happy to assist you, but they may need your help to better assist you. Calling Aleratec Technical Support without all the necessary information can be both time consuming and frustrating. Therefore, please try to have the following information ready before calling: 1. Part Number - the part number is located on the...
Page 36
www.aleratec.com32 Technical Support FAX Back Form Aleratec, Inc. Technical Support Fa\cx Back Form Please record the following information to help expedite any warranty claim: Model No.: _____________Serial No.: ____________________________ Date Purchased ________________________________________________ Place of Purchase: ______________________________________________ To: Technical Support Group FAX: 1-818-678-0483 FROM: _____________________FAX: ____________________________ E-MAIL...
Page 40
Document Number: 330110_SU\f_EN\f_Rev\b A Copyright © 2012 Specifications subj\Uect to change with\Uout notice\b Aleratec, Inc\b 9851 Owensmouth Avenue Chatsworth, CA 913\U11 U\bS\bA\b www.aleratec.com