Aleratec 116 USB 30 Copy Tower Duplicator User Guide

www.aleratec.com7
Using the USB Dupli\ccation Suite Softwa\cre
5. Once you have added all the files/folders you want to copy, click the 
tab at the top of the window named “Destination”.
6. Click to select each USB flash drive that you want to copy to. You can 
click the button with the green “+” symbol to select all drives or the 
button with the red “-” symbol to deselect all drives. The button with 
the blue arrow will refresh the current list of drives.  

www.aleratec.com8
Using the USB Dupli\ccation Suite Softwa\cre
Data Copy Only -•co\bt\f\bued•
7. The “Processes” counter displays how many concurrent processes you 
want to run at once. The more processes you choose the more drives 
will be copied to simultaneously.
8. The “Copies” counter is the total number of copies you want to do. If 
the number of copies specified is more than the number of available 
drive slots, the software will break up the job into multiple “rounds”, 
requiring the user to...

www.aleratec.com9
Using the USB Dupli\ccation Suite Softwa\cre
9. Once the drives, processes, and copies are specified, the user may click 
“Start” to begin the duplication process.
10. Progress is displayed through messages in the log and in the progress 
bar. Also, the number of completed and rejected copies is displayed 
underneath the output log.  

www.aleratec.com10
Using the USB Dupli\ccation Suite Softwa\cre
Data Copy Only -•co\bt\f\bued•
11. If the user wishes to cancel the duplication process at any time, just 
click “Cancel.”  

www.aleratec.com11
Using the USB Dupli\ccation Suite Softwa\cre
Format Only
Format one or more USB flash drives with this command (FAT formatting 
only). A volume label to identify the media is added at the same time.
Note: The “Add File” interf\sace will be disabled \ssince it is not \fsed.
1. Start by clicking on “Format Only” from the drop down menu. 
2. Click on the “Destination” tab located at the top of the window.  

www.aleratec.com12
Using the USB Dupli\ccation Suite Softwa\cre
Format Only -•co\bt\f\bued•
3. Select the drives that you wish to format. You can click the button with 
the green “+” symbol to select all drives or the button with the red 
“-” symbol to deselect all drives. The button with the blue arrow will 
refresh the current list of drives.
4. You can specify a single label for each drive in the text box under 
“Enter Label.” If no label is specified, the label that the drive currently 
has will be...

www.aleratec.com13
Using the USB Dupli\ccation Suite Softwa\cre
5. The “Processes” counter displays how many concurrent processes you 
want to run at once. The more processes you choose the more drives 
will be copied to simultaneously.
6. The “Copies” counter is the total number of copies you want to do. If 
the number of copies specified is more than the number of available 
drive slots, the software will break up the job into multiple “rounds”, 
requiring the user to switch in new cards after each...

www.aleratec.com14
Using the USB Dupli\ccation Suite Softwa\cre
Format Only -•co\bt\f\bued•
7. Once the drives, processes, and copies are specified, the user may click 
“Start” to begin the duplication process.
8. Progress is displayed through messages in the log and in the progress 
bar. Also, the number of completed and rejected copies is displayed 
underneath the output log.  

www.aleratec.com15
Using the USB Dupli\ccation Suite Softwa\cre
9. If the user wishes to cancel the duplication process at any time, just 
click “Cancel”.  

www.aleratec.com16
Using the USB Dupli\ccation Suite Softwa\cre
Format Then Data C\copy
This function will format and then copy files/folders to one or more USB 
flash drives. Any files/folders on the target device(s) with the same names as 
any source files/folders will be overwritten.
1. Start by clicking on “Format Then Data Copy” from the drop down menu.
2. On the same screen, click “Add Files” to copy individual files or “Add 
Folder” to copy an entire folder.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 Note: Make...