Home > Aleratec > Hard Disk > Aleratec 111 USB Copy Cruiser SA Stand Alone USB Flash Drive Duplicator User Guide

Aleratec 111 USB Copy Cruiser SA Stand Alone USB Flash Drive Duplicator User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Aleratec 111 USB Copy Cruiser SA Stand Alone USB Flash Drive Duplicator User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							www.aleratec.com5
    Overv\bew
    Subfunct\b\fns \ff Ma\bn \CMenu Items 5, 6, an\Cd 7
    The main menu “Information” function has 2 subfunctions. These are:
    The main menu “Utility” function has 6 subfunctions. These are:
    5.1 USB Inf\f
    5.2 System Inf\f
    USB Dupl\bcat\fr
    5. Inf\frmat\b\fn
    OK
    ESC
    
    
    6.1 F\frmat FAT
    6.2 Measure Speed
    USB Dupl\bcat\fr
    6. Ut\bl\bty
    OK
    ESC
    
    
    6.3 Med\ba Check
    6.4 Qu\bck Erase USB\C
    6.5 Full Erase USB
    6.6 System Update
    6.7 Calc. Checksum
    ENT
    
    ESCUSB Dupl\bcat\fr
    6. Ut\bl\bty
    ENT
    
    ESCUSB Dupl\bcat\fr
    5. Inf\frmat\b\fn      
    						
    							www.aleratec.com6
    Overv\bew
    Subfunct\b\fns \ff Ma\bn \CMenu Items 5, 6, an\Cd 7 - continued 
    The main menu “Setup” function has 8 subfunctions. These are:
    7.1 Start-up Menu
    7.2 C\fpy Area
    USB Dupl\bcat\fr
    7. Setup
    OK
    ESC
    
    
    7.3 Butt\fn Beep
    7.4 Asyn H\fld T\bme
    7.5 Ign\fre S\bze
    7.6 Asynchr\fn\fus Enable/D\bsable
    7.7 Language
    7.8 W\frk\bng M\fde N\frmal/Turb\f
    ENT
    
    ESCUSB Dupl\bcat\fr
    7. Setup    
    						
    							www.aleratec.com7
    Us\bng the USB Dupl\bc\Cat\fr
    Synchr\fn\fus and Asynchr\fn\fus
    The 1:11 USB Copy Cruiser SA supports two copying methods: 
    • Synchronous
    • Asynchronous
    Sy\fchro\fous Copyi\fg
    Synchronous Copying means that all flash drives begin copying together. 
    Synchronous Copying is used when the source data is larger than the system 
    buffer (256MB). 
    You can check the size of the data source drive by inserting the source drive 
    into the USB Duplicator and using the arrow keys to first select “Information”, 
    then select “USB Info”.
    Plug in one source and up to 11 target USB flash drives. The display will read 
    out the number of USB flash drives that are ready for copying and the content 
    size. When you have finished loading the target drives use the arrow keys to 
    select “Copy” and then select OK. 
    Asy\fchro\fous Copyi\fg
    Asynchronous Copying is used when the data files are the same as or less than 
    the systems buffer memory (256MB). If the source data content is less than 
    the systems buffer memory you can copy flash drives continuously by taking 
    out the drive which has finished copying, and replacing it with another blank. 
    Asynchronous Copying will start immediately after loading the first target 
    drive. 
    When this process is used the source data is read into systems buffer first. You 
    can check the size of the data source USB flash drive by inserting it into the 
    USB Duplicator and using the arrow keys to first select “Information”, then 
    select “USB Info”.  
    						
    							www.aleratec.com8
    Us\bng the USB Dupl\bc\Cat\fr
    Ma\bn Menu
    Functions are selected with the arrow keys. The numbers correspond to the 
    Function listing in the previous section.
    Copy 
    This function makes USB flash copies. The duplicator auto detects and 
    supports Synchronous, and Asynchronous methods of Copy.
    Synchronous Copying
    In Synchronous Copying all USB flash drives are copied simultaneously. 
    Synchronous Copying is used when the source data is larger than the system 
    buffer (256MB).  
    1. Load the source flash drive into the USB Duplicator. Use the UP or 
    DOWN arrow to scroll through the menu until Copy is displayed on 
    the LCD screen. 
    2. Press the OK button on the display panel. The LCD will display the 
    following status:
    N\fte: The \fumber beside “U\iSB” is the capacity \iof the USB flash driv\ie 
    i\f megabytes. The \fumber to the r\iight is the size occ\iupied by files or 
    images. 
    3. Load the blank target flash drives into the USB Duplicator. The LCD 
    will display the number of blank media loaded and ready for copying.
    USB(963M) 450M
     0 readyESC
    OK
    
    ESC
    OK
    
    USB Dupl\bcat\fr
    1. C\fpy
    USB(963M)  450M
     3 readyESC
    OK
    
    ENT
    
    ESC
    ENT
    
    ESC
    ENT
    
    ESC        
    						
    							www.aleratec.com9
    Us\bng the USB Dupl\bc\Cat\fr
    Synchronous Copying - continued 
    4. Finish loading the blank target flash drives, then press the OK button on the 
    display panel.
    5. The LCD will display the status of the copying process.
    6. When Copy is complete LCD will display the following status:
    If the Copy fails, the LCD will display the number of flash drives that failed 
    and passed.
    N\fte: Whe\f copyi\fg is i\f pr\iocess the Gree\f LED\i o\f the fro\ft pa\fel is\i 
    bli\fki\fg. Do \fot take\i out the drive while\i it is copyi\fg. Whe\f \icopyi\fg is 
    fi\fished the Gree\f LE\iD stays o\f (\fo bli\fk\ii\fg). If a\f error occ\iurs duri\fg the 
    copy process a Red \iLED will display. 
    Asynchronous Copying
    Asynchronous Copy is used only when the source content is the same as or less 
    than the system buffer (256MB). With the source content read into the systems 
    buffer you can copy flash drives continuously by taking out the drive which has 
    finished copying, and replacing it with another blank. This process is repeated 
    until the copying job is complete.
    1. Load the source flash drive into the USB Duplicator. Use the UP or DOWN 
    arrow to scroll through the menu until Copy is displayed on the LCD screen.  
    ESC
    OK
    
    C\fpy   450M
    15% 0:32 68MESC
    OK
    
    Total MBytes  
    o\f source
    MBytes copiedTime elapsedPerce\ft Complete
    ESC
    OK
    
    USB Dupl\bcat\fr
    1. C\fpy
    ENT
    
    ESC
    ENT
    
    ESC
    ENT
    
    ESC
    T\ftal OK: 5     OK: \C5     NG: 0
    1:03                 OK: 5     NG: 0        
    						
    							www.aleratec.com10
    Us\bng the USB Dupl\bc\Cat\fr
    2. Press the OK button on the display panel. The USB Duplicator will start 
    to read the source content into the system’s buffer and immediately start 
    copying any loaded target USB flash drives.
    3. Load the blank target flash drives into the USB Duplicator. The LCD will 
    display the number of blank media loaded and copying.
    N\fte: Whe\f copyi\fg is i\f pr\iocess the Gree\f LED\i o\f the fro\ft pa\fel is\i 
    bli\fki\fg. Do \fot take\i out the drive while\i it is copyi\fg. Whe\f \icopyi\fg is 
    fi\fished the Gree\f LE\iD stays o\f (\fo bli\fk\ii\fg). If a\f error occ\iurs duri\fg the 
    copy process a Red \iLED will display. 
    4. As finished drives are removed, and new blanks inserted, the display 
    will show the number of copies completed and the number of USB 
    flash drives still in the copying process. If the Copy fails, the LCD will 
    display the number of flash drives that failed and passed.
    N\fte: Duri\fg Asy\fchro\fous Copyi\fg \iyou ca\f use the UP a\fd DOWN 
    arrow keys to chec\ik each flash drives \icopyi\fg status. 
    USB(58M) 450M
    Read\bng...ESC
    OK
    
    Pass: 0   W\frk\bng
    Fa\bl: 0    3ESC
    OK
    
    Pass: 5   W\frk\bng
    Fa\bl: 0    2ESC
    OK
    
    ENT
    
    ESC
    ENT
    
    ESC
    ENT
    
    ESC        
    						
    							www.aleratec.com11
    Us\bng the USB Dupl\bc\Cat\fr
    Ma\bn Menu
    Compare
    This function will compare the finished target USB flash drives to the source 
    USB flash drive after copying is complete. The USB Duplicator supports 
    Compare in both Synchronous, and Asynchronous modes.
    Synchronous Compare
    In Synchronous Compare all USB flash drives are compared simultaneously. 
    1. When copying is complete and with the data source drive and the target 
    USB flash drives still loaded in the USB Duplicator, use the UP or 
    DOWN arrow to scroll through the menu until Compare is displayed on 
    the LCD screen.
    2. Press the OK button on the display panel to select Compare. The LCD 
    will display the following status:
    3. Press OK again and the Compare will start as shown in the display below.
    N\fte: Whe\f Compare is i\f p\irocess the Gree\f LE\iD o\f the fro\ft pa\fel \i
    is bli\fki\fg. Do \fot t\iake out the drive w\ihile it is ru\f\fi\fg a c\iompariso\f. 
    Whe\f Compare is fi\fish\ied the Gree\f LED st\iays o\f (\fo bli\fki\fg).\i If a\f 
    error occurs duri\fg \ithe copy process a \iRed LED will display\i. 
    ESC
    OK
    
    USB Dupl\bcat\fr
    2. C\fmpare
    ESC
    OK
    
    C\fmpare   925M
    15% 0:18 226M
    ESC
    OK
    
    USB (953M)  925M
     3 ready
    ENT
    
    ESC
    ENT
    
    ESC
    ENT
    
    ESC        
    						
    							www.aleratec.com12
    Us\bng the USB Dupl\bc\Cat\fr
    4. When Compare is complete the display will show the total, and the 
    number that pass and fail. 
    Asynchronous Compare
    Asynchronous Compare is used only when the source content is the same as 
    or less than the system buffer (256MB). With the source content read into 
    the systems buffer you can compare flash drives continuously by taking out 
    the drive which has finished comparing, and replacing it with another flash 
    drive. This process is repeated until the comparison job is complete.    
    1. Load the source flash drive into the USB Duplicator. Use the UP or 
    DOWN arrow to scroll through the menu until Compare is displayed 
    on the LCD screen.  
    2. Press the OK button on the display panel. The USB Duplicator will 
    start to read the source content into the system’s buffer and immediately 
    start comparing any loaded target USB flash drives.
    3. Load the target flash drives to be compared into the USB Duplicator. 
    The LCD will display the number of flash drives loaded and comparing.
    N\fte: Whe\f compare is i\f p\irocess the Gree\f LE\iD o\f the fro\ft pa\fel \i
    is bli\fki\fg. Do \fot t\iake out the drive w\ihile it is compari\fg.\i Whe\f 
    compari\fg is fi\fished \ithe Gree\f LED stays\i o\f (\fo bli\fki\fg). If \ia\f error 
    occurs duri\fg the pro\icess a Red LED will\i display. 
    ESC
    OK
    
    USB(58M) 450M
    Read\bng...ESC
    OK
    
    ESC
    OK
    
    USB Dupl\bcat\fr
    2. C\fmpare
    Pass: 0   W\frk\bng
    Fa\bl: 0    3ESC
    OK
    
    ENT
    
    ESC
    ENT
    
    ESC
    ENT
    
    ESC
    ENT
    
    ESC
    T\ftal OK: 5     OK: \C5     NG: 0
    1:03                 OK: 5     NG: 0          
    						
    							www.aleratec.com13
    Us\bng the USB Dupl\bc\Cat\fr
    Asynchronous Compare - continued 
    4. As finished drives are removed, and new flash drives inserted, the 
    display will show the number of comparisons completed and the 
    number of USB flash drives still in the comparison process. If the 
    Compare fails, the LCD will display the number of flash drives that 
    failed and passed.
    N\fte: Duri\fg Asy\fchro\fous Compare\i you ca\f use the UP a\fd DOWN 
    arrow keys to chec\ik each flash drives \icompariso\f status. 
    Pass: 5   W\frk\bng
    Fa\bl: 0    2ESC
    OK
    ENT
    
    ESC    
    						
    							www.aleratec.com14
    Us\bng the USB Dupl\bc\Cat\fr
    Ma\bn Menu
    Copy+Compare
    This function will Copy and Compare USB flash drives. The duplicator 
    auto detects and supports Synchronous, and Asynchronous methods of 
    Copy+Compare.
    Synchronous Copy+Compare
    In Synchronous Copy+Compare all USB flash drives are copied and 
    compared simultaneously. Synchronous Copy+Compare is used when the 
    source data is larger than the system buffer (256MB).  
    1. Load the source flash drive into the USB Duplicator. Use the UP or 
    DOWN arrow to scroll through the menu until Copy+Compare is 
    displayed on the LCD screen. 
    2. Press the OK button on the display panel. The LCD will display the 
    following status:
    N\fte: The \fumber beside “U\iSB” is the capacity \iof the USB flash driv\ie 
    i\f megabytes. The \fumber to the r\iight is the size occ\iupied by files or 
    images. 
    3. Load the blank target flash drives into the USB Duplicator. The LCD 
    will display the number of media loaded and ready for Copy+Compare.
    ESC
    OK
    
    USB Dupl\bcat\fr
    3. C\fpy+C\fmpare
    USB(963M) 450M
     0 readyESC
    OK
    
    USB(963M)  450M
     3 readyESC
    OK
    
    ENT
    
    ESC
    ENT
    
    ESC
    ENT
    
    ESC        
    						
    All Aleratec manuals Comments (0)

    Related Manuals for Aleratec 111 USB Copy Cruiser SA Stand Alone USB Flash Drive Duplicator User Guide