Aleratec 111 USB Copy Cruiser SA Stand Alone USB Flash Drive Duplicator User Guide

www.aleratec.com15
Us\bng the USB Dupl\bc\Cat\fr
Synchronous Copy+Compare - continued 
4. Finish loading the blank target flash drives, then press the OK button 
on the display panel.
5. The LCD will display the status of the copying process.
6. When Copy is complete LCD will display the following status:
If the Copy fails, the LCD will display the number of flash drives that 
failed and passed.
7. When Copy is complete the Compare portion will automatically begin. 
The LCD will display the status of the...

www.aleratec.com16
Ma\bn Menu
Asynchronous Copy+Compare
Asynchronous Copy+Compare is used only when the source content 
is the same as or less than the system buffer (256MB). With the source 
content read into the systems buffer you can copy and compare flash drives 
continuously by taking out the drive which has finished its Copy+Repair 
cycle, and replacing it with another blank. This process is repeated until the 
Copy+Compare job is complete.    
1. Load the source flash drive into the USB...

www.aleratec.com17
Us\bng the USB Dupl\bc\Cat\fr
Asynchronous Copy+Compare - continued 
4. If the Copy fails, the LCD will display the number of flash drives that 
failed and passed.
N\fte: Duri\fg Asy\fchro\fous Copyi\fg \iyou ca\f use the UP a\fd DOWN 
arrow keys to chec\ik each flash drives \icopyi\fg status. 
5. When Copy is complete the Compare portion will automatically begin. 
The LCD will display the status of the copying process.
6. When Compare is complete the display will show the total, and...

www.aleratec.com18
Us\bng the USB Dupl\bc\Cat\fr
Ma\bn Menu
Capacity Check
This function will check the capacity of each flash drive inserted. When 
finished the following screen will appear. 
Using the UP and DOWN arrows, you can scroll thru each drive 
loaded to display capacity. 
I\fformatio\f
This function includes 2 subfunctions. These are: 
5.1 USB Inf\f
5.2 System Inf\f
USB Dupl\bcat\fr
5. Inf\frmat\b\fn
OK
ESC


ESC
OK

Pass: 12        Cap\Cac\bty 
Fa\bl: 0            \C       0
ESC
OK
...

www.aleratec.com19
Us\bng the USB Dupl\bc\Cat\fr
5.1 USB Info.
USB Info is a function that displays the USB flash drives basic information 
such as flash type, content size, and available space.
1. Use UP or DOWN arrow to scroll through the menu until Information 
is displayed on the LCD screen. 
Press the OK button to select or press ESC to go to the next setting.
2. Press OK to get USB Info. You can scroll through each drive with 
the arrow keys. Press ESC when finished. The LCD will display the...

www.aleratec.com20
Us\bng the USB Dupl\bc\Cat\fr
Ma\bn Menu
Utility
The main menu Utility function has 6 subfunctions. These are:
6.1 F\frmat FAT
6.2 Measure Speed
USB Dupl\bcat\fr
6. Ut\bl\bty
OK
ESC


6.3 Med\ba Check
6.4 Qu\bck Erase USB\C
6.5 Full Erase USB
6.6 System Update
6.7 Calc. Checksum    

www.aleratec.com21
Us\bng the USB Dupl\bc\Cat\fr
Ma\bn Menu
6.1 Format FAT
This function is used to format flash drives with the duplicator. If the 
original format is FAT, then the format operation will not change the format, 
but will write over any data on the flash drive. 
If the format is not FAT (e.g. NTFS, Linux, or FAT multi-partition) the 
controller will check the capacity of the flash drive. If the capacity is greater 
than 2GB, it will automatically use FAT 32 format. If the capacity is less...

www.aleratec.com22
Us\bng the USB Dupl\bc\Cat\fr
6.2 Measure Speed
This function will measure the read and write speeds of drives loaded in the 
ports. 
1. Load drives. Use UP or DOWN arrow to scroll through the menu until 
Utility is displayed on the LCD screen. Press the OK button to select or 
press ESC to go to the next setting.
2. Press OK and scroll to Measure Speed. The LCD will display the 
following status:
3. Use the UP and Down arrow keys to check each drive. 
6.3 Media Check
This function is...

www.aleratec.com23
Us\bng the USB Dupl\bc\Cat\fr
2. Press OK and scroll to Media Check. The LCD will display the 
following status:
3. Use UP or DOWN arrow to scroll through the available options:
6.3.1 Safe Check
This function will read all the data on the flash drive with no writing so 
as to preserve all of the data and format on the drive. Use the UP and 
Down arrow keys to check the results on all of the drives loaded. 
6.3.2 Normal Check
The controller will read and write in each area of the drive....

www.aleratec.com24
Us\bng the USB Dupl\bc\Cat\fr
6.4 Quick Erase USB
Quick Erase USB is a function that can quickly erase the target USB flash 
drive. 
N\fte: The Quick Erase USB\i fu\fctio\f will o\fly er\iase the FAT table i\fdex 
of each target flash\i drives. 
 
1. Use UP or DOWN arrow to scroll through the menu until Utility is 
displayed on the LCD screen. Press the OK button to select or press 
ESC to go to the next setting.
2. Press OK and scroll to Quick Erase USB. The LCD will display the...