Aleratec 111 USB Copy Cruiser SA Stand Alone USB Flash Drive Duplicator User Guide

www.aleratec.com5
Overv\bew
Subfunct\b\fns \ff Ma\bn \CMenu Items 5, 6, an\Cd 7
The main menu “Information” function has 2 subfunctions. These are:
The main menu “Utility” function has 6 subfunctions. These are:
5.1 USB Inf\f
5.2 System Inf\f
USB Dupl\bcat\fr
5. Inf\frmat\b\fn
OK
ESC


6.1 F\frmat FAT
6.2 Measure Speed
USB Dupl\bcat\fr
6. Ut\bl\bty
OK
ESC


6.3 Med\ba Check
6.4 Qu\bck Erase USB\C
6.5 Full Erase USB
6.6 System Update
6.7 Calc. Checksum
ENT

ESCUSB Dupl\bcat\fr
6. Ut\bl\bty
ENT
...

www.aleratec.com6
Overv\bew
Subfunct\b\fns \ff Ma\bn \CMenu Items 5, 6, an\Cd 7 - continued 
The main menu “Setup” function has 8 subfunctions. These are:
7.1 Start-up Menu
7.2 C\fpy Area
USB Dupl\bcat\fr
7. Setup
OK
ESC


7.3 Butt\fn Beep
7.4 Asyn H\fld T\bme
7.5 Ign\fre S\bze
7.6 Asynchr\fn\fus Enable/D\bsable
7.7 Language
7.8 W\frk\bng M\fde N\frmal/Turb\f
ENT

ESCUSB Dupl\bcat\fr
7. Setup    

www.aleratec.com7
Us\bng the USB Dupl\bc\Cat\fr
Synchr\fn\fus and Asynchr\fn\fus
The 1:11 USB Copy Cruiser SA supports two copying methods: 
• Synchronous
• Asynchronous
Sy\fchro\fous Copyi\fg
Synchronous Copying means that all flash drives begin copying together. 
Synchronous Copying is used when the source data is larger than the system 
buffer (256MB). 
You can check the size of the data source drive by inserting the source drive 
into the USB Duplicator and using the arrow keys to first select...

www.aleratec.com8
Us\bng the USB Dupl\bc\Cat\fr
Ma\bn Menu
Functions are selected with the arrow keys. The numbers correspond to the 
Function listing in the previous section.
Copy 
This function makes USB flash copies. The duplicator auto detects and 
supports Synchronous, and Asynchronous methods of Copy.
Synchronous Copying
In Synchronous Copying all USB flash drives are copied simultaneously. 
Synchronous Copying is used when the source data is larger than the system 
buffer (256MB).  
1. Load the...

www.aleratec.com9
Us\bng the USB Dupl\bc\Cat\fr
Synchronous Copying - continued 
4. Finish loading the blank target flash drives, then press the OK button on the 
display panel.
5. The LCD will display the status of the copying process.
6. When Copy is complete LCD will display the following status:
If the Copy fails, the LCD will display the number of flash drives that failed 
and passed.
N\fte: Whe\f copyi\fg is i\f pr\iocess the Gree\f LED\i o\f the fro\ft pa\fel is\i 
bli\fki\fg. Do \fot take\i out...

www.aleratec.com10
Us\bng the USB Dupl\bc\Cat\fr
2. Press the OK button on the display panel. The USB Duplicator will start 
to read the source content into the system’s buffer and immediately start 
copying any loaded target USB flash drives.
3. Load the blank target flash drives into the USB Duplicator. The LCD will 
display the number of blank media loaded and copying.
N\fte: Whe\f copyi\fg is i\f pr\iocess the Gree\f LED\i o\f the fro\ft pa\fel is\i 
bli\fki\fg. Do \fot take\i out the drive while\i...

www.aleratec.com11
Us\bng the USB Dupl\bc\Cat\fr
Ma\bn Menu
Compare
This function will compare the finished target USB flash drives to the source 
USB flash drive after copying is complete. The USB Duplicator supports 
Compare in both Synchronous, and Asynchronous modes.
Synchronous Compare
In Synchronous Compare all USB flash drives are compared simultaneously. 
1. When copying is complete and with the data source drive and the target 
USB flash drives still loaded in the USB Duplicator, use the UP or...

www.aleratec.com12
Us\bng the USB Dupl\bc\Cat\fr
4. When Compare is complete the display will show the total, and the 
number that pass and fail. 
Asynchronous Compare
Asynchronous Compare is used only when the source content is the same as 
or less than the system buffer (256MB). With the source content read into 
the systems buffer you can compare flash drives continuously by taking out 
the drive which has finished comparing, and replacing it with another flash 
drive. This process is repeated until...

www.aleratec.com13
Us\bng the USB Dupl\bc\Cat\fr
Asynchronous Compare - continued 
4. As finished drives are removed, and new flash drives inserted, the 
display will show the number of comparisons completed and the 
number of USB flash drives still in the comparison process. If the 
Compare fails, the LCD will display the number of flash drives that 
failed and passed.
N\fte: Duri\fg Asy\fchro\fous Compare\i you ca\f use the UP a\fd DOWN 
arrow keys to chec\ik each flash drives \icompariso\f status....

www.aleratec.com14
Us\bng the USB Dupl\bc\Cat\fr
Ma\bn Menu
Copy+Compare
This function will Copy and Compare USB flash drives. The duplicator 
auto detects and supports Synchronous, and Asynchronous methods of 
Copy+Compare.
Synchronous Copy+Compare
In Synchronous Copy+Compare all USB flash drives are copied and 
compared simultaneously. Synchronous Copy+Compare is used when the 
source data is larger than the system buffer (256MB).  
1. Load the source flash drive into the USB Duplicator. Use the UP or...