Aleratec 111 HDD Copy Cruiser IDESATA 11 HDD Duplicator and 12 HDD Sanitizer User Guide

							www.aleratec.com25
Using the 1:11 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
The “Setup” menu contains configuration options for the 1:11 HDD Copy Cruiser 
IDE/SATA. It is suggested to use the factory defaults for optimum performance. 
1. Use the arrow buttons (or) to select “Setup”. Press ENT to select. The 
following screen will be displayed. 
Note: After changing any of the configuration options, you must 
press ENT to accept the change. Once all changes are complete, 
press ESC to exit the Setup menu. The following screen will be 
displayed. 
2. When the configuration changes have been saved, the following screen will be 
shown. 
ENTESC


10. Setup
ENTESC


Saving config...Please Wait...
ENTESC


10. Setup  
						

							www.aleratec.com26
Using the 1:11 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Language
This option allows you to select the language that is used for the display. 
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2. Use the arrow buttons () to scroll to “Language”. The following 
screen will be displayed. 
3. Press ENT to display the current language selection (the default language 
is English). 
4. Use the arrow buttons () to toggle through the available options. Once 
you change a configuration option, remember to press ENT to save it.
ENTESC


10-01. SetupLanguage
ENTESC


LanguageEnglish
ENTESC


10. Setup  
						

							www.aleratec.com27
Using the 1:11 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Copy	Size
This function is used to specify the amount of source disk data to copy to the 
target drives. 
1. Use the arrow buttons (or) select “Setup”, then press ENT. The 
following screen will be displayed. 
2. Use the arrow buttons () to scroll to “Copy Size”. The following 
screen will be displayed. 
3. Press ENT to display the current configuration setting. 
4. Use the arrow buttons () to toggle through the available copy sizes 
(1% - 100%). Once you change a setting, remember to press ENT to save it.
ENTESC


10-02. SetupCopy Size
ENTESC


10. SetupALL
ENTESC


Copy Size1% - 100% (MB)age
ENTESC


10. Setup  
						

							www.aleratec.com28
Using the 1:11 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Startup	Menu
This option lets you select any of the functions (except “Setup”) as the initial 
function that appears when the 1:11 HDD Copy Cruiser IDE/SATA is powered 
on.   
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2. Use the arrow buttons () to toggle between the subfunctions. Press 
ENT to select “Startup Menu”. The following screen will be displayed. 
3. Press ENT to display the current configuration setting. The default setting 
is “1. Copy HDD”.
4. Use the arrow buttons () to toggle through the available options. Once 
you change a setting, remember to press ENT to save it.
ENTESC


10. Setup
ENTESC


10-03. SetupStartup Menu
ENTESC


Startup Menu1. Copy HDD  
						

							www.aleratec.com29
Using the 1:11 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Auto	Compare
This option allows you to choose whether or not to automatically compare the 
source and target hard drives after every copy operation. 
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2. Use the arrow buttons () to scroll to “Auto Compare”. The following 
screen will be displayed. 
3. Press ENT to display he current configuration setting. The default setting 
is “Off”. 
4. Use the arrow buttons () to modify the setting. After you change a 
setting, remember to press ENT to save it.
ENTESC


10. Setup
ENTESC


10-04. SetupAuto Compare
ENTESC


Auto CompareOff  
						

							www.aleratec.com30
Using the 1:11 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Button	Sound
This option allows you to enable or disable the beeping sound heard when you 
press a button. 
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2. Use the arrow buttons () to scroll to “Button Sound”. The following 
screen will be displayed. 
3. Press ENT to display the current configuration setting. The default is “On”. 
4. Use the arrow buttons () to toggle through the available options. Once 
you change a default, remember to press ENT to save it.
ENTESC


10. Setup
ENTESC


10-05. SetupButton Sound
ENTESC


Button SoundOn  
						

							www.aleratec.com31
Using the 1:11 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Device	Info
This option displays information about any hard drives connected to the 1:11 
HDD Copy Cruiser IDE/SATA. 
1. Use the arrow buttons (or) to scroll to “Setup”. The following screen 
will be displayed. 
2. Use the arrow buttons () to scroll to “Device Info”. The following 
screen will be displayed. 
3. Press ENT to display information about the first device.
4. Use the arrow buttons (or) to show information about any additional 
hard drive that is connected. The following screen will be displayed. 
ENTESC


10. Setup
ENTESC


10-06. SetupDevice Info
ENTESC


0 Source CH:  0Hitachi 149.1GB
ENTESC


1 Target  CH:  1Hitachi 149.1GB  
						

							www.aleratec.com32
Using the 1:11 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	System	Info
This function displays information about the 1:11 HDD Copy Cruiser IDE/
SATA, including the current firmware version. 
1. Use the arrow buttons (or) to select “Setup”. The following screen 
will be displayed. 
2. After selecting “Setup” use the arrow keys () to toggle between 
the subfunctions. Press ENT to select. “System Info”. The following 
information will be displayed. 
3. Press ENT to display system information. 
ENTESC


10. Setup
ENTESC


10-07. SetupSystem Info
ENTESC


2055PF ver:A.24Q  
						

							www.aleratec.com33
Using the 1:11 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Fast	Copy
The “Fast Copy” option allows you to choose whether to copy the entire source 
hard disk, or only the used space. 
1. Use the arrow buttons (or) to select “Setup”. The following screen 
will be displayed. 
2. Press the arrow buttons () to scroll to “Fast Copy”. The following 
screen will be displayed. 
3. Press ENT to display the current configuration setting. The default is “On” 
(only used space will be copied).
4. Use the arrow buttons () to toggle between “On” and “Off”. Once you 
change a default, remember to press ENT to save it.
ENTESC


10. Setup
ENTESC


10-08. SetupFast Copy
ENTESC


Fast CopyOn  
						

							www.aleratec.com34
Using the 1:11 HDD Copy Cruiser IDE/SATA 
Main Menu
Setup
Setup:	Auto	Start	Drive	-	(Not Supported)
Setup:	Auto	Start	 Timer	-	(Not Supported)
Setup:	 Tolerance	Size
This function is to set the HDD capacity tolerance between the source and 
target. 
1. Use the arrow buttons (or) to select “Setup”. The following screen 
will be displayed. 
2. Press the arrow buttons () to scroll to “Tolerance Size”. The following 
screen will be displayed. 
3. Press ENT to display the current configuration setting. (Off or 1 - 100%)
4. Use the arrow buttons () to change the setting. Once you change a 
default, remember to press ENT to save it.
ENTESC


10. Setup
ENTESC


10-11. SetupTolerance Size
ENTESC


Tolerance SizeOff