Aleratec 11 HDD Cruiser Hard Disk Drive Duplicator and Sanitizer User Guide

www.aleratec.com25
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-03 Startup Me\fu
This option lets you select any of the functions (except “Setup”) as the initial 
function that appears when the 1:1 HDD Cruiser is powered on.   
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2.  Use the arrow buttons () to toggle between the subfunctions. Press 
ENT to select “Startup Menu”. The following screen will be displayed. 
3.  Press ENT to display the current...

www.aleratec.com26
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-04 Auto Compare
This option allows you to choose whether or not to automatically compare the 
source and target hard drives after every copy operation. 
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2.  Use the arrow buttons () to scroll to “Auto Compare”. The following 
screen will be displayed. 
3.  Press ENT to display he current configuration setting. The default setting 
is “Off”. 
4.  Use...

www.aleratec.com27
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-05 Copy with Siz\Pe
This option allows you to choose whether or not to automatically rescan for 
connected drives immediately before a copy operation.
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2.  Use the arrow buttons () to scroll to “Copy with Size”. The following 
screen will be displayed. 
3.  Press ENT to display he current configuration setting. The default setting 
is “Off”. 
4.  Use...

www.aleratec.com28
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-06 Butto\f Sou\fd
This option allows you to enable or disable the beeping sound heard when you 
press a button. 
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2.  Use the arrow buttons () to scroll to “Button Sound”. The following 
screen will be displayed. 
3.  Press ENT to display the current configuration setting. The default is “On”. 
4.  Use the arrow buttons () to toggle through the...

www.aleratec.com29
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-07 Device I\ffo
This option displays information about any hard drives connected to the 1:1 
HDD Cruiser. 
1. Use the arrow buttons (or) to scroll to “Setup”. The following screen 
will be displayed. 
2.  Use the arrow buttons () to scroll to “Device Info”. The following 
screen will be displayed. 
3.  Press ENT to display information about the first device.
4.  Use the arrow buttons (or) to show information about any additional 
hard...

www.aleratec.com30
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-08 System I\ffo
This function displays information about the 1:1 HDD Cruiser, including the 
current firmware version. 
1. Use the arrow buttons (or) to select “Setup”. The following screen 
will be displayed. 
2.  After selecting “Setup” use the arrow keys () to toggle between 
the subfunctions. Press ENT to select. “System Info”. The following 
information will be displayed. 
3.  Press ENT to display system information. 
ENTESC


8....

www.aleratec.com31
Using the 1:1 HDD C\Copy Cr\fiser 
Set\fp Men\f
8-09 Fast Copy
The “Fast Copy” option allows you to choose whether to copy the entire source 
hard disk, or only the used space. 
1. Press the arrow buttons ( ) to scroll to “Fast Copy”. The following 
screen will be displayed. 
2.  Press ENT to display the current configuration setting. The default is “On” 
(only used space will be copied).
3.  Use the arrow buttons () to toggle between “On” and “Off”. Once you 
change a default,...

www.aleratec.com32
Using the 1:1 HDD C\Cr\fiser 
Main Men\f
USB Mode
This option connects the HDDs in the drive bays to a PC via the USB port on 
the back of the 1:1 HDD Cruiser. 
1. Use the arrow buttons (or) to select “USB Mode”. The following 
screen will be displayed.
2.  Press ENT and the following screen will be displayed. 
3.  Use the down arrow key () to select “YES” and then press  ENT again to 
switch to USB Mode. The following screen will be displayed. 
4.  Press ENT to switch to...

www.aleratec.com33
Using the 1:1 HDD C\Cr\fiser 
Main Men\f
USB Mode - continued 
5. Press ENT and the following screen will be displayed. Use the down 
arrow key () to select “YES” to return to stand-alone mode. The 
controller will prompt you to restart the device. 
ENTESC


Back to SA Mode?
NO
ENTESC


\blease Wait ...  

www.aleratec.com34
Using the 1:1 HDD C\Cr\fiser 
Advanced Set\fp Men\f\C
The “Adv Setup” menu contains additional configuration options for the 1:1 HDD 
Cruiser.  
1. Press and hold the ESC	button for 3 seconds to enter Adv Setup. The following 
screen will be displayed.
Note: After cha\fgi\fg a\fy of\P the co\ffiguratio\f op\Ptio\fs, you must pre\Pss 
ENT to accept the cha\P\fge. O\fce all cha\fges\P are complete, pre\Pss ESC 
to exit the Adv Setup me\fu. The followi\fg scree\P\f will be displayed\P....