Home > Aleratec > Hard Disk > Aleratec 11 HDD Cruiser Hard Disk Drive Duplicator and Sanitizer User Guide

Aleratec 11 HDD Cruiser Hard Disk Drive Duplicator and Sanitizer User Guide

Download as PDF Print this page Share this page

Have a look at the manual Aleratec 11 HDD Cruiser Hard Disk Drive Duplicator and Sanitizer User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Aleratec manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

$Page 26 www.aleratec.com20 Using the 1:1 HDD C\Cr\fiser Main Men\f Overwrite The “Overwrite” function will sanitize (wipe clean of all data) the hard disk drives connected to the 1:1 HDD Copy Cruiser. 1. Load the source HDD and the target HDDs into the 1:1 HDD Cruiser. The system will auto-detect the hard drives. Using the arrow buttons ( or) select “Overwrite”. The following screen will be displayed. Note: Overwriti\fg the e\fti\Pre capacity of all\P co\f\fected hard dri\Pves ca\f take a\f exte\fded...$

$Page 27 www.aleratec.com21 Using the 1:1 HDD C\Cr\fiser b. To perform a “Three Pass Overwrite”, scroll to “3 Pass” and press ENT. This method will write one pass of 1’s, one pass of zeros, and one pass of randomly generated data. The next screen allows you to choose whether you wish to verify the random overwrite. Use the arrow buttons to toggle between “On” and “Off”. Press ENT to select. c. To perform a “Seven Pass Overwrite”, scroll to “7 Pass” and press ENT. The following screen will be displayed....$

$Page 28 www.aleratec.com22 Using the 1:1 HDD C\Cr\fiser Main Men\f Setup The “Setup” menu contains configuration options for the 1:1 HDD Copy Cruiser. It is suggested to use the factory defaults for optimum performance. 1. Use the arrow buttons (or) to select “Setup”. Press ENT to select. The following screen will be displayed. Note: After cha\fgi\fg a\fy of\P the co\ffiguratio\f op\Ptio\fs, you must pre\Pss ENT to accept the cha\P\fge. O\fce all cha\fges\P are complete, pre\Pss ESC to exit the Setup...$

$Page 29 www.aleratec.com23 Using the 1:1 HDD C\Cr\fiser Set\fp Men\f 8-01 La\fguage This option allows you to select the language that is used for the display. 1. Use the arrow buttons (or) select “Setup”. The following screen will be displayed. 2. Use the arrow buttons () to scroll to “Language”. The following screen will be displayed. 3. Press ENT to display the current language selection (the default language is English). 4. Use the arrow buttons () to toggle through the available options....$

$Page 30 www.aleratec.com24 Using the 1:1 HDD C\Cr\fiser Set\fp Men\f 8-02 Copy Size This function is used to specify the amount of source disk data to copy to the target drives. 1. Use the arrow buttons (or) select “Setup”, then press ENT. The following screen will be displayed. 2. Use the arrow buttons () to scroll to “Copy Size”. The following screen will be displayed. 3. Press ENT to display the current configuration setting. 4. Use the arrow buttons () to toggle through the available copy...$

$Page 31 www.aleratec.com25 Using the 1:1 HDD C\Cr\fiser Set\fp Men\f 8-03 Startup Me\fu This option lets you select any of the functions (except “Setup”) as the initial function that appears when the 1:1 HDD Cruiser is powered on. 1. Use the arrow buttons (or) select “Setup”. The following screen will be displayed. 2. Use the arrow buttons () to toggle between the subfunctions. Press ENT to select “Startup Menu”. The following screen will be displayed. 3. Press ENT to display the current...$

$Page 32 www.aleratec.com26 Using the 1:1 HDD C\Cr\fiser Set\fp Men\f 8-04 Auto Compare This option allows you to choose whether or not to automatically compare the source and target hard drives after every copy operation. 1. Use the arrow buttons (or) select “Setup”. The following screen will be displayed. 2. Use the arrow buttons () to scroll to “Auto Compare”. The following screen will be displayed. 3. Press ENT to display he current configuration setting. The default setting is “Off”. 4. Use...$

$Page 33 www.aleratec.com27 Using the 1:1 HDD C\Cr\fiser Set\fp Men\f 8-05 Copy with Siz\Pe This option allows you to choose whether or not to automatically rescan for connected drives immediately before a copy operation. 1. Use the arrow buttons (or) select “Setup”. The following screen will be displayed. 2. Use the arrow buttons () to scroll to “Copy with Size”. The following screen will be displayed. 3. Press ENT to display he current configuration setting. The default setting is “Off”. 4. Use...$

$Page 34 www.aleratec.com28 Using the 1:1 HDD C\Cr\fiser Set\fp Men\f 8-06 Butto\f Sou\fd This option allows you to enable or disable the beeping sound heard when you press a button. 1. Use the arrow buttons (or) select “Setup”. The following screen will be displayed. 2. Use the arrow buttons () to scroll to “Button Sound”. The following screen will be displayed. 3. Press ENT to display the current configuration setting. The default is “On”. 4. Use the arrow buttons () to toggle through the...$

$Page 35 www.aleratec.com29 Using the 1:1 HDD C\Cr\fiser Set\fp Men\f 8-07 Device I\ffo This option displays information about any hard drives connected to the 1:1 HDD Cruiser. 1. Use the arrow buttons (or) to scroll to “Setup”. The following screen will be displayed. 2. Use the arrow buttons () to scroll to “Device Info”. The following screen will be displayed. 3. Press ENT to display information about the first device. 4. Use the arrow buttons (or) to show information about any additional hard...$

$Page 36 www.aleratec.com30 Using the 1:1 HDD C\Cr\fiser Set\fp Men\f 8-08 System I\ffo This function displays information about the 1:1 HDD Cruiser, including the current firmware version. 1. Use the arrow buttons (or) to select “Setup”. The following screen will be displayed. 2. After selecting “Setup” use the arrow keys () to toggle between the subfunctions. Press ENT to select. “System Info”. The following information will be displayed. 3. Press ENT to display system information. ENTESC   8....$

View all the pages

Add page 31 to Favourites

image text

Enable zoom

							www.aleratec.com25
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-03 Startup Me\fu
This option lets you select any of the functions (except “Setup”) as the initial 
function that appears when the 1:1 HDD Cruiser is powered on.   
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2.  Use the arrow buttons () to toggle between the subfunctions. Press 
ENT to select “Startup Menu”. The following screen will be displayed. 
3.  Press ENT to display the current configuration setting. The default setting 
is “1. Copy HDD”.
4.  Use the arrow buttons () to toggle through the available options.  Once 
you change a setting, remember to press  ENT to save it.
ENTESC


8. Set\fp
ENTESC


8-03. Set\fp
Start\fp Men\f
ENTESC


Start\fp Men\f
1. Copy HDD

Add page 32 to Favourites

image text

Enable zoom

							www.aleratec.com26
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-04 Auto Compare
This option allows you to choose whether or not to automatically compare the 
source and target hard drives after every copy operation. 
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2.  Use the arrow buttons () to scroll to “Auto Compare”. The following 
screen will be displayed. 
3.  Press ENT to display he current configuration setting. The default setting 
is “Off”. 
4.  Use the arrow buttons () to modify the setting.  After you change a 
setting, remember to press  ENT to save it.
ENTESC


8. Set\fp
ENTESC


8-04. Set\fp
A\fto Compare
ENTESC


A\fto Compare
Off

Add page 33 to Favourites

image text

Enable zoom

							www.aleratec.com27
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-05 Copy with Siz\Pe
This option allows you to choose whether or not to automatically rescan for 
connected drives immediately before a copy operation.
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2.  Use the arrow buttons () to scroll to “Copy with Size”. The following 
screen will be displayed. 
3.  Press ENT to display he current configuration setting. The default setting 
is “Off”. 
4.  Use the arrow buttons () to modify the setting.  After you change a 
setting, remember to press  ENT to save it.
ENTESC


8. Set\fp
ENTESC


8-05. Set\fp
Copy with Size
ENTESC


8. Set\fp
Off

Add page 34 to Favourites

image text

Enable zoom

							www.aleratec.com28
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-06 Butto\f Sou\fd
This option allows you to enable or disable the beeping sound heard when you 
press a button. 
1. Use the arrow buttons (or) select “Setup”. The following screen will 
be displayed. 
2.  Use the arrow buttons () to scroll to “Button Sound”. The following 
screen will be displayed. 
3.  Press ENT to display the current configuration setting. The default is “On”. 
4.  Use the arrow buttons () to toggle through the available options.  Once 
you change a default, remember to press  ENT to save it.
ENTESC


8. Set\fp
ENTESC


8-06. Set\fp
B\ftton So\fnd
ENTESC


B\ftton So\fnd
On

Add page 35 to Favourites

image text

Enable zoom

							www.aleratec.com29
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-07 Device I\ffo
This option displays information about any hard drives connected to the 1:1 
HDD Cruiser. 
1. Use the arrow buttons (or) to scroll to “Setup”. The following screen 
will be displayed. 
2.  Use the arrow buttons () to scroll to “Device Info”. The following 
screen will be displayed. 
3.  Press ENT to display information about the first device.
4.  Use the arrow buttons (or) to show information about any additional 
hard drive that is connected. The following screen will be displayed. 
ENTESC


8. Set\fp
ENTESC


8-07. Set\fp
Device Info
ENTESC


0 So\frce  CH:  0
Hitachi  149.1GB
ENTESC


1 Target  CH:  1
Hitachi  149.1GB

Add page 36 to Favourites

image text

Enable zoom

							www.aleratec.com30
Using the 1:1 HDD C\Cr\fiser 
Set\fp Men\f
8-08 System I\ffo
This function displays information about the 1:1 HDD Cruiser, including the 
current firmware version. 
1. Use the arrow buttons (or) to select “Setup”. The following screen 
will be displayed. 
2.  After selecting “Setup” use the arrow keys () to toggle between 
the subfunctions. Press ENT to select. “System Info”. The following 
information will be displayed. 
3.  Press ENT to display system information. 
ENTESC


8. Set\fp
ENTESC


8-08. Set\fp
System Info
ENTESC


2055\bF  ver:A.14H

Add page 37 to Favourites

image text

Enable zoom

							www.aleratec.com31
Using the 1:1 HDD C\Copy Cr\fiser 
Set\fp Men\f
8-09 Fast Copy
The “Fast Copy” option allows you to choose whether to copy the entire source 
hard disk, or only the used space. 
1. Press the arrow buttons ( ) to scroll to “Fast Copy”. The following 
screen will be displayed. 
2.  Press ENT to display the current configuration setting. The default is “On” 
(only used space will be copied).
3.  Use the arrow buttons () to toggle between “On” and “Off”. Once you 
change a default, remember to press  ENT to save it.
ENTESC


8-09. Fast Copy
ENTESC


Fast Copy
On

Add page 38 to Favourites

image text

Enable zoom

							www.aleratec.com32
Using the 1:1 HDD C\Cr\fiser 
Main Men\f
USB Mode
This option connects the HDDs in the drive bays to a PC via the USB port on 
the back of the 1:1 HDD Cruiser. 
1. Use the arrow buttons (or) to select “USB Mode”. The following 
screen will be displayed.
2.  Press ENT and the following screen will be displayed. 
3.  Use the down arrow key () to select “YES” and then press  ENT again to 
switch to USB Mode. The following screen will be displayed. 
4.  Press ENT to switch to stand-alone mode. The following screen will be 
displayed. 
ENTESC


9. USB Mode
ENTESC


Switch USB Mode?
NO
ENTESC


USB L. H Mode
D1: - - -  D2: - -\C -
ENTESC


Copy Mode

Add page 39 to Favourites

image text

Enable zoom

							www.aleratec.com33
Using the 1:1 HDD C\Cr\fiser 
Main Men\f
USB Mode - continued 
5. Press ENT and the following screen will be displayed. Use the down 
arrow key () to select “YES” to return to stand-alone mode. The 
controller will prompt you to restart the device. 
ENTESC


Back to SA Mode?
NO
ENTESC


\blease Wait ...

Add page 40 to Favourites

image text

Enable zoom

							www.aleratec.com34
Using the 1:1 HDD C\Cr\fiser 
Advanced Set\fp Men\f\C
The “Adv Setup” menu contains additional configuration options for the 1:1 HDD 
Cruiser.  
1. Press and hold the ESC	button for 3 seconds to enter Adv Setup. The following 
screen will be displayed.
Note: After cha\fgi\fg a\fy of\P the co\ffiguratio\f op\Ptio\fs, you must pre\Pss 
ENT to accept the cha\P\fge. O\fce all cha\fges\P are complete, pre\Pss ESC 
to exit the Adv Setup me\fu. The followi\fg scree\P\f will be displayed\P. 
2.  When the configuration changes have been saved, the following screen will be 
shown. 
ENTESC


10. Adv Set\fp
ENTESC


Saving Config...
\blease Wait...
ENTESC


10. Adv Set\fp

All Aleratec manuals Comments (0)

Aleratec 11 HDD Cruiser Hard Disk Drive Duplicator and Sanitizer User Guide

Related Manuals for Aleratec 11 HDD Cruiser Hard Disk Drive Duplicator and Sanitizer User Guide