Albrecht AX400/AE500 H First Edition Owners Manual

Erasing the Search Band Channel MemoryThe frequencies entered in Search Band Channel Memory can be erased.
1. Set the unit to the Channel Memory Mode by pressing 7 FREQ./CH while FUNC is pressed until ‘M’ appears on
the display.
2. Turn the selector to select the Channel Memory address of the search band that you wish to erase.
(Illust. 30-1)
3. Hold down FUNC key and press CLEAR PROGRAM key.  (CLr is displayed.)   (Illust. 30-2)
4. Hold down FUNC key and press CLEAR PROGRAM key once again.  (A high...

appears on the display.
2. Hold down FUNC key and press 7 FREQ/CH key once again.
3. Select the channel memory address to be erased by using the selector or numeric keys.
(Illust. 33-1)
4. Hold down FUNC key and press 9 L/OUT key.  ( „CLr“ is displayed.)(Illust. 33-2)
5. Hold down FUNC key and press 9 L/OUT key once again to confirm deletion.
( A high pitched beep is emitted and the frequency is erased from search pass channel memory.)
6. To complete the procedure, press CLEAR PROGRAM key.
Note:
To...

Scanning A Block of Channels (Block Scan)
You can scan through only specified block of channels. One block consists of 100 channel memory addresses. (‘34) Hold down FUNC key and press 8 SCAN key.
  (All channel scan starts.) Enter the block number to be scanned using the numeric key.(Illust. 37) To scan another block, enter the block number using the numeric key. To end, press CLEAR PROGRAM key.
l When the block number is specified while in Memory Scan Memory, only specified channels within the
specified...

TO USE YOUR RECEIVER MORE EFFECTIVELYIn order to use your receiver more effectively, the unit enables you to change various settings. All these functions are
programmed in SET mode initiated by pressing FUNC and 0 SET key simultaneously.
Changing the Frequency StepWhen the frequency is changed either manually or by searching, it increases or descreses in accordance with the
frequency step assigned or specified.  In the initial state (when shipped from the factory), the frequency step is set
automaticaly...

 To complete the setting, press CLEAR PROGRAM key.
Changing Light OperationThe light stays on for 5 seconds after the Light key is released.  The Light operation can be changed so that it
remains on until the Light key is pressed again. Hold down FUNC key and press 0 SET Key. Turn the selector to change Set menu to display „nor LAmP“.(Illust. 43) Hold down FUNC key and turn the selector to change the display from „nor“ to „tGL“. To complete the setting, press CLEAR PROGRAM key. To turn the light on, hold...

To activate the programmed SET MODE, simply hold down FUNC key and press 4 MY key. The value of the settings
are changed by repeating the action. When Reset or All Reset are performed, the contents of this key return to the
memorized frequency step.
Using the Selector in Key LockWhen Key Lock is activated, all the keys except POWER/SQL OFF/SQL/VOLUME are locked. This function
additionally allows rotary selector to effective even when Key Lock is activated. Hold down FUNC key and press 0 SET key. Turn the...

Changing the Frequency to MHz Digit (Fast Step)In order to change the frequency rapidly, this receiver is equipped with FAST STEP function. This is activated by
turning the rotary selector while FUNC key is pressed. Initially at the factory, a digit of 1MHz is set for this mode
therefore the frequencies change at the digit of 1MHz by activating FAST STEP. The digit of frequency may be
reprogrammed of your preference.
To change the digit of FAST STEP, Hold down FUNC key and press 0 SET key. Turn the...

The channel memory is not stored. There are no vacant channel Memory addresses.
Does not scan/ search.Squelch is off.
Not able to scan Channel MemoriesThe frequencies are not stored or only one frequency is
 stored.
 
Specifications
General
Frequency range0.500MHz - 1299.999MHz
Speaker impedance8 ohms
Antenna impedance50 ohms
Antenna connector BNC
Frequency Step1kHz, 5kHz, 6.25kHz, 9kHz, 10kHz, 12.5kHz, 15kHz, 20kHz, 25kHz, 30kHz, 50kHz, 100kHz,
 AUTO
Number of Channel MemoryChannel Memory400
Search band...