Home > Albrecht > Communications receiver > Albrecht AX400/AE500 H First Edition Owners Manual

Albrecht AX400/AE500 H First Edition Owners Manual

Add to Favourites
    Download as PDF

    View the Albrecht AX400/AE500 H First Edition Owners Manual for free. All the Albrecht manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 AX400 / AE 500 H First Edition Owner’s Manual Thank you for purchasing our receiver For proper use of this receiver, please read this manual thoroughly. Keep this manual in a safe place for future reference. WARNING l Do not use any batteries other than size AA Alkaline or manganese batteries. Using different batteries could cause fire, electric shock or failure. l Do not place consumed batteries in a fire. They could explode, causing fire or burns. l Do not install or remove batteries while your hands...
    Page 2 l Never disassemble the receiver. Never touch the receiver’s core. l It is adjusted for optimum performance. l Avoid hot places and locations exposed to direct sunlight. l Avoid extremely cold places. l Avoid exposing the receiver to excessive vibrations and dusty places. l Applicable batteries are either AA-size manganese or alkaline batteries. Never use any other batteries. l This receiver require 2.2 to 3.5 volts DC. l This receiver is capable of receiving AM, FM Narrow Band (Amateur Radio bands,...
    Page 3 by the POWER key. Please take out the batteries and replace them! Adjusting the Volume To increase the volume, turn the VOL knob clockwise. (Illust. 8) To decrease the volume, turn the VOL knob counterclockwise. (Illust. 7) CAUTIONl Set the volume to an acceptable loudness level. Be sure to decrease the volume level before switching from built-in speaker to earphones. Adjusting the SquelchWhen a signal is not being received, a noise is emitted. The Squelch adjustment eliminates this noise. Also...
    Page 4 (Illust. 13-2) Hold down FUNC key and press POWER key. (A high pitched beep is emitted). Release the keys and confirm if the original state is displayed in the display. (Illust. 13-3) Resetting the All Settings (All Reset) With following procedure, your receiver is set at factory’s original setting. Use this function only when it is necessary such event as CPU is locked up. All channel memories will be lost and rewritten to factory settings. Refer to the table below for detail factory setting....
    Start reading Albrecht AX400/AE500 H First Edition Owners Manual

    Related Manuals for Albrecht AX400/AE500 H First Edition Owners Manual

    All Albrecht manuals