Albrecht AE92H Scanning Receiver Manual
Here you can view all the pages of manual Albrecht AE92H Scanning Receiver Manual. The Albrecht manuals for Communications receiver are available online for free. You can easily download all the documents as PDF.
Page 21
21 · Press Func + Pgm in chain search mode or chain search hold mode. The lowest blank channel and bank appear. · Press E / Pgm to store the frequency into the blank channel. To select another channel, press Func + or Func +before you press E / Pgm. You can also press 0-9 to select the bank. If you try to save a frequency that is already stored, the scanner sounds an error tone and displays the channel that was duplicated. · If you entered the frequency by mistake, press ●/Clr. · To...
Page 22
22 · Press Func + or Func + . The scanner searches, starting from the frequency you entered in the step before. · If you enter a frequency that is out of range, the scanner sounds an error tone and Error appears. · Press Func + to change the search direction downward or Func + to change the search direction upward. Frequencies appear during the search. Notes: · You can set the delay function on or off during the search or while the search stops. · You can skip a frequency when the...
Page 23
23 · If you entered the frequency by mistake, press ●/Clr. · To enter the frequency anyway, press E to accept. The scanner moves to program mode after you stored the frequency. Search Skip Memory You can skip up to 50 specified frequencies during a search. This lets you avoid unwanted frequencies or those already stored in a channel. Note: Search skip frequencies are shared by service search, direct entry search, and chain search. If skip frequencies are sent in certain mode, the...
Page 24
24 · If the scanner is scanning and stops on an active channel where you want to store a delay, quickly press Func + Dly before it continues scanning again. DLY appears. · If the desired channel is not selected, manually select the channel, then press Func + Dly. DLY appears. · If the scanner is searching, press Func + Dly while the scanner is searching. DLY appears and the scanner automatically adds a 2-second delay to every frequency it stops on in that band. · To turn off the 2-second...
Page 25
25 Follow these steps to select a different channel in a bank as the priority channel. · Manually select the channel you want to select as the priority channel. · Press Func + Pgm, then press Func + Pri. P appears to the left of the selected channel number. · Repeat these steps for the channel in each bank you want to program as a priority channel. · To turn on the priority feature, press Func + Pri during scanning. PRI appears. Then the scanner checks the designated priority channel...
Page 26
26 Problem Possible Cause Suggestion Check the batteries or make sure the AC adapter is connected to an AC outlet and the scanner. The scanner doesn’t work. The scanner might not get any AC/DC power. If there is a wall switch that controls power to the AC outlet where you connected the AC adapter, make sure it is on. Check the antenna connection or move or reposition the antenna. Move the scanner. Improper reception. The scanner’s antenna might need to be adjusted. You...
Page 27
27 Resetting the Scanner If the scanners display locks up or stops operating properly, you might need to reset the scanner. Caution: This procedure clears all the information you have stored in the scanner. Before you reset the scanner, try turning it off and on to see if it begins working properly. Reset the scanner only when you are sure it is not working properly. After a reset, only the band plan informations and the preprogrammed search bands are still memorized in the scanner! To...
Page 28
28 Repairs Do not attempt any repair. The scanner contains no user serviceable parts. Contact the ALAN Customer Service Center phone (+49) (0)6103 9481 30, send an e-mail to [email protected] or take the scanner to a qualified and authorized repair technician. Birdies All radios can receive “birdies” (undesired signals). If your scanner stops during Scan mode and no sound is heard, it might be receiving a birdie. Birdies are internally generated signals inherent in the electronics of...
Page 29
29 Specifications Channels:...............................................................200 Banks: ......................................10 (20 channels each) Frequency Range (in MHz): 25.0-27.995 ...........................................Citizens Band 28.0–69.995 .................. 10 to 6 Meter Amateur Band 137.0–147.995 .commercial & 2 Meter Amateur Band 70.0–88.0 .................................... 4 Meter Utility Band 108.0–136.9875 .................................... Aircraft Band...
Page 30
30 Ext. Speaker Jack ...............................................3.5 mm DC Power Jack ...................................................4.4 mm Size: ...................68mm (W) x 31.5mm (D) x 115mm (H) Weight: ...................................................................165 g Features, specifications, and availability of optional accessories are all subject to change without notice. European 2 years warranty The distributor, dealer or retail shop warrants to the original retail...