Albrecht AE92H Scanning Receiver Manual

1   
 
 
 
 
 
 
AE 92 H 
 
 Scanning Receiver 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ALAN Electronics GmbH  

2 AE92H  Controls and Display 
 
 
 
 
 
 
 
 
Antenna 
(See “Connecting the 
Antenna” on Page 11-12)   Headphone Jack 
   Squelch 
     
        Volume 
 
 
 
 
 
 
 
 
          Display 
     
 
   
       Keypad 
 
 
 
 
DC 6V 
Jack 
 
 
 
 
 
 
     Power 
  

3  Contents 
AE92H  Controls and Display.............................2 
Introduction............................................................4 
Precautions............................................................4 
Earphone Warning................................................4 
Safety Warning......................................................4 
Legal notes:...........................................................4 
Feature Highlights.................................................6 
About...

4  Resetting the Scanner........................................27 
Care and Maintenance........................................27 
Birdies..................................................................28 
Specifications.......................................................29 
European 2 years warranty.................................30 
Where to find service hints and documentation.....30 
Optional Accessories...........................................31 
CE-Declaration of...

5  This table lists the frequency ranges, default frequency step, 
default mode (AM or FM), and type of transmissions you can 
hear for each range. The scanner has 2 Band Plans, which are 
useful for major regions in Europe. Band Plan 2 is optimized for 
Germany. 
 Frequency ranges Band Plan 1 Frequency Range MHz Steps Radio Service  25.0000  -   29.9950 5 kHz CB, 10 m  30.0000  -   79.9875 12.5 kHz VHF Low Band  80.0000  -   82.9900 10 kHz VHF Low Band  83.0000  -   87.2625 12.5 kHz VHF Low Band...

6  Note: Please carry out a memory initialization (Reset, see page 
27 ) after band plan was changed. 
 
Feature Highlights 
  
Chain Search - lets you enter personal search bands in 10 
locations and search all locations in a chain of frequency bands. 
 
Triple-Conversion Circuitry - virtually eliminates any 
interference from IF (intermediate frequency) images, so you 
hear only the selected frequency. 
 
Channel-Storage Banks - the scanner has 10 banks. You can 
store up to 20 frequencies into each...

7  About this Manual 
The screen displays used in this manual are representations of 
what might appear when you use your scanner. Since what you 
see depends on the frequencies for your area and the settings 
you select, you might notice some differences between what is 
in this manual and what appears on your scanner. 
To get the most from this manual, review the contents to become 
familiar with the basic functions available. If you are new to 
scanning, be sure to read the next chapter for a quick...

8  · Aircraft 
· Amateur radio 
· PMR users 
· Broadcast AM/FM/TV stations 
· Many other business radio users 
 
When you want to store a conventional system, all you need to 
know is the frequencies they operate on. When you are 
scanning a conventional system, the scanner stops very briefly 
on each channel to see if there is activity. If there isn’t, the 
scanner quickly moves to the next channel. If there is, then the 
scanner pauses on the transmission until it is over. 
 
Simplex Operation 
Simplex...

9  Included with Your Scanner 
          
・ Owner’s Manual 
・ Scanner and Antenna 
・ Belt Clip (with 2 screws) 
・ Adapter 
・ Battery set ( 2 pcs NiMH ) 
 
Note: If any of these items are missing or damaged, contact 
your place of purchase. 
 
 
 
Setting Up Your Scanner 
 
These guidelines will help you install and use your new scanner: 
 
· If your scanner receives interference or electrical noise, 
move the scanner or its antenna away from the 
source. 
· To improve the scanner’s reception, use an...

10   
 
 
 
 
 
 
 
 
 
  
 
 
 
 
                
 
 
4. Replace the cover. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
5. Connect the supplied AC adaptor to the scanner’s DC 6 V 
socket to charge the batteries at least for some hours before first 
time use.  
 
Using Non-Rechargeable Batteries 
You can also use two alkaline batteries to power your scanner. 
Before you use alkaline batteries, you must remove the sticker in 
the compartment and move the switch below the sticker to 
REG. ALK. BATT. position....