Home
>
Alarm Lock
>
Alarm Lock
>
Alarm Lock KEYPAD A100WP SEALED ENVIRONMENT WIRING PROGRAMMING INSTRUCTIONS User Manual
Alarm Lock KEYPAD A100WP SEALED ENVIRONMENT WIRING PROGRAMMING INSTRUCTIONS User Manual
Here you can view all the pages of manual Alarm Lock KEYPAD A100WP SEALED ENVIRONMENT WIRING PROGRAMMING INSTRUCTIONS User Manual. The Alarm Lock manuals for Alarm Lock are available online for free. You can easily download all the documents as PDF.
Page 1
1 A-100WP SEALED ENVIRONMENT KEYPAD WIRING & PROGRAMMING INSTRUCTIONS WI1496 12/06 GENERAL DESCRIPTION The A-100WP is a self-contained access control keypad de- signed for the harshest outdoor environments. Its heavy stainless steel enclosure and metal keypad buttons also make it extremely vandal resistant. The A-100WP operates up to three outputs (two relays and 1 open-collector transis- tor) and can be used to trigger a door strike, an electromag- netic door lock, or any other...
Page 2
2 GETTING STARTED First Time Startup--Self-Test After you unpack the lock from its factory packaging, you must perform the initial startup procedure (outlined be- low). For keypads already in use, this startup procedure can also be used to erase all existing keypad program- ming and return the keypad back to its original out of box factory default condition. 1. Install the jumper located on the back of the key- pad. 2. Apply power (12-24VDC polarized or 12-24VAC) to the power input...
Page 3
3 •Orange LED lights - sounder beeps twice. 2. Press 32# •Green LED blinks once - sounder beeps once. 3. Press new 3-digit User Number and press #. •Green LED blinks once - sounder beeps once. 4. Press new 4-digit User Code and press #. •Green LED blinks once - sounder beeps once. 5. Re-press new 4-digit User Code and press #*. •Green LED lights / sounder beeps for 1 second indi- cating the User Code was added successfully. Delete a User Code 1. If not in already, enter...
Page 4
4 number of digits in the new Master Code) and--without exiting Program Mode--change the Master Code via Function 31. Press: 31# [G1] (new MC) # [G1] (new MC) #* [G1]. Be sure to either commit the Master Code to memory or record it in a safe place. If the Master Code is ever lost, the keypad will need to be restarted using the First Time Startup procedure described on page 2. 32 Add (or Edit) a User Code Allows you to add a new or edit an existing User Code. User Codes are 3-6 digit...
Page 5
5 Visual LED Indicators LED In Normal Mode In Program Mode Red Remains lit while waiting for a keypress Confirms errors Blinks when editing an existing User Number Orange Flashes to confirm keypress Steady On to confirm in Program Mode. Flashes to confirm keypress Green Confirms activation of Outputs, mem- ory reset and Master Code reset Confirms valid data or empty User Number Audible Sounder Indicators Beep(s) In Normal Mode In Program Mode 1 short Unit power up and when a key is pressed...
Page 6
6 PROGRAMMING FUNCTIONS--OVERVIEW The audible sounder and visual LED indicators are displayed in the text below as follows: [O2] = Orange LED lights and sounder beeps twice [G1] = Green LED lights and sounder beeps once [R2] = Red LED lights and sounder beeps twice TIMER FUNCTIONS FUNCTION NUMBER DESCRIPTION PRESS THESE BUTTONS ON KEYPAD 21 Output 1 Activation Duration Program time from 01 to 99 seconds. Press: 21# [G1] ___ ___ #* [G1]. 22 Output 2 Activation Duration Program time from 01...
Page 7
7 MOUNTING TEMPLATE The A-100WP is designed to be installed in its stainless rugged mounting fixture. The fixture is 4 wide and 4¾ tall.
Page 8
8 ALARM LOCK LIMITED WARRANTY ALARM LOCK SYSTEMS, INC. (ALARM LOCK) warrants its products to be free from manufacturing defects in materials and workmanship for 24 months following the date of manufacture. ALARM LOCK will, within said period, at its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user. This warranty shall not apply to any equipment, or any part thereof, which has been repaired by others, improperly installed,...