Home > Alarm Lock > Alarm Lock > Alarm Lock KEYPAD A100WP SEALED ENVIRONMENT WIRING PROGRAMMING INSTRUCTIONS User Manual

Alarm Lock KEYPAD A100WP SEALED ENVIRONMENT WIRING PROGRAMMING INSTRUCTIONS User Manual

Add to Favourites
    Download as PDF

    View the Alarm Lock KEYPAD A100WP SEALED ENVIRONMENT WIRING PROGRAMMING INSTRUCTIONS User Manual for free. All the Alarm Lock manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 1 A-100WP SEALED ENVIRONMENT KEYPAD WIRING & PROGRAMMING INSTRUCTIONS WI1496 12/06 GENERAL DESCRIPTION The A-100WP is a self-contained access control keypad de- signed for the harshest outdoor environments. Its heavy stainless steel enclosure and metal keypad buttons also make it extremely vandal resistant. The A-100WP operates up to three outputs (two relays and 1 open-collector transis- tor) and can be used to trigger a door strike, an electromag- netic door lock, or any other...
    Page 2 2 GETTING STARTED First Time Startup--Self-Test After you unpack the lock from its factory packaging, you must perform the initial startup procedure (outlined be- low). For keypads already in use, this startup procedure can also be used to erase all existing keypad program- ming and return the keypad back to its original out of box factory default condition. 1. Install the jumper located on the back of the key- pad. 2. Apply power (12-24VDC polarized or 12-24VAC) to the power input...
    Page 3 3 •Orange LED lights - sounder beeps twice. 2. Press 32# •Green LED blinks once - sounder beeps once. 3. Press new 3-digit User Number and press #. •Green LED blinks once - sounder beeps once. 4. Press new 4-digit User Code and press #. •Green LED blinks once - sounder beeps once. 5. Re-press new 4-digit User Code and press #*. •Green LED lights / sounder beeps for 1 second indi- cating the User Code was added successfully. Delete a User Code 1. If not in already, enter...
    Page 4 4 number of digits in the new Master Code) and--without exiting Program Mode--change the Master Code via Function 31. Press: 31# [G1] (new MC) # [G1] (new MC) #* [G1]. Be sure to either commit the Master Code to memory or record it in a safe place. If the Master Code is ever lost, the keypad will need to be restarted using the First Time Startup procedure described on page 2. 32 Add (or Edit) a User Code Allows you to add a new or edit an existing User Code. User Codes are 3-6 digit...
    Start reading Alarm Lock KEYPAD A100WP SEALED ENVIRONMENT WIRING PROGRAMMING INSTRUCTIONS User Manual

    Related Manuals for Alarm Lock KEYPAD A100WP SEALED ENVIRONMENT WIRING PROGRAMMING INSTRUCTIONS User Manual

    All Alarm Lock manuals