Alarm Lock DL2800 Programming Instructions User Manual
Have a look at the manual Alarm Lock DL2800 Programming Instructions User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 84 Alarm Lock manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Day(s) Function Number Up to 150 scheduled functions can be programmed. For Day Enter : 1 = Sunday, 2 = Monday, 3=Tuesday, 4 Wednesday 5 = Thursday, 6 = Friday, 7=Saturday, 8 = Monday - Fri- day 9 = Saturday and Sunday, 0=All days of the week Enter time of day in 24 hour format (00:00- 23:59) Time Function Name : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Schedule Record Sheet
32 ACCESS = Entry into a restricted area. AUDIT TR AIL = A date/time stamped log of previous lock events. BURGLARY CONTROL PANEL = Provides local alarm and remote communication to request security for burglary/break-in. CLOCK •REAL TIME CLOCK = An accurate built-in clock that allows date/ time stamping of events. The clock can be slowed or speeded up to fine tune long term accuracy to within three minutes per year. •CLOCK SETTINGS = Printout includes date, time, weekday, and clock speed. •CLOCK SPEED = The clock can be adjusted to allow faster/slower speeds and therefore increasing clock accuracy. CODE = Numeric sequence of numbers (such as: 1234) entered at the keypad. If Star-Enter-Key is required, must be followed by a [:] key. •BASIC USER CODE = User Codes assigned to User Numbers 12+ (except Users 299-300). (Basic User Codes do not allow pro- gramming) •INVALID CODE = A User Code that has not been programmed in the lock. •MANAGER CODE = User Codes assigned to User Numbers 2 through 6. (Allows most programming functions). •MASTER CODE = The User Code assigned to User Number 1. The Default (factory) Master Code is 123456. The User with the Master Code has complete control of the lock (no programming restrictions). •SERVICE CODE = User 300 User Code. Allows only one use, then must be re-enabled by Function 9. •SUPERVISOR CODE = User Codes assigned to Users 7 through 11. Can only program certain day-to-day operational functions. •USER CODE = Code used by Users. A User Code is 3 to 6 nu- meric digits long, pressed into the keypad buttons, allowing con- trolled entry by Users. •VALID CODE = An entered User Code that has been programmed in the Lock Program. COM PORT = A computer serial communications port used to commu- nicate with the Lock and/or Data Transfer Module. DATA TRANSFER MODULE = A device that permits transfer of pro- gram/data between a computer and the lock. DATE = Month, Day and Year entered as MMDDYY. DAY OF WEEK = Sunday through Saturday (where 1 = Sunday and 7 = Saturday). DEFAULT = Default settings are the original settings that were set at the factory; in other words, it is the locks original factory condition when the lock was first taken out of its original box. The default settings are permanently encoded within the locks fixed memory, and when the lock is first started, or when power is removed and re-applied (see Wiring, Power-Up & Battery Replacement, page 10), the original factory default settings are re-loaded and take ef- fect. DISABLE = Turn off. DOOR NUMBER = Identification of each door lock with a specific num- ber in order to ensure that the correct lock is associated with the correct lock programming within DL-Windows or the AL-DTM. Note: Door Number is a term used with AL-DTM versions 1 and 2 and with DL-Windows versions 3.5.0 and earlier. Later versions of the AL-DTM and DL-Windows monitor door numbers automati- cally, therefore there is no need to manually change door numbers via the keypad. Therefore, Function 59 is no longer used with the later versions of the AL-DTM and DL-Windows. DOWNLOAD = To receive data from the lock into the AL-DTM or DL- Windows. ENABLE = Turn on. EVENTS = Recorded lock activity. FUNCTION (also called Programming Functions) = are the numbers used to program lock features (enabling/disabling Users, User Groups, Passage Mode, Schedules, etc.). GROUP •USER GROUP = Defining a User to specific Groups, allows User entry when the Group is allowed entry. •GROUP 1 ENABLES GROUP 4 USERS = A Group 1 USER CODE entry during a predefined schedule will allow access to Group 4 Users. See page 26. •GROUP 1 PUTS UNIT IN PASSAGE = A Group 1 USER CODE entry during a pre-defined schedule will unlock unit. See page 25. INSTALLER = See.... CODE, INSTALLER CODE. KEYPAD = 10-numeric keys, : and special ; key. •KEYPAD LOCKOUT = Keypad is programmed to lockout Us- ers, for a specified period of time, when a specified number of invalid User Codes are entered. •KEYPAD PROGRAMMING = Ability to program the lock through the keypad. KEYPRESS = Pressing a button on the lock’s keypad. LEVEL ABILITY = Predefined User Types (such as Master, Manager and Supervisor) each having specific abilities to program and/or control the lock. Glossary
33 LOCK PROGRAM = A Lock Program is stored within the locks circuitry and contains the instructions that the lock uses to perform its various functions. You can use the keypad to change the Lock Program, and you can also use DL-Windows to create a Lock Program on your com- puter, and then transfer and store the Lock Program within the lock. LOCKOUT ATTEMPTS = A specified number of invalid User Code entries (1-9), that will disable the keypad for a predefined period of time (1-60 seconds). LOCKOUT TIME = A predefined time (1-60) seconds that the lock will stop accepting User Codes, after a specified number of invalid User Code entries (1-9). LOG = See... AUDIT TRAIL. MANAGER = See... CODE, MANAGER CODE. MASTER = See... CODE, MASTER CODE. PASSAGE = Allow anyone to pass through the door without USER CODES (lock remains unlocked thus allowing passage). PRINTER = A printout device such as an infrared printer or computer printer. PROGRAM MODE = A mode allowing program/data to be entered through the keypad. Only specific Users (Master, Managers and Supervisors) can program a lock manually, by entering their USER CODE, followed by the [;] key. REMOTE INPUT = Entry into a restricted area, by pressing a button connected to the REMOTE INPUT WIRES (White and White) by someone on the other side of the door. SCHEDULE = A programmed operation (enable/disable, lock/unlock, etc.) on a specific day (Sunday through Saturday) and time. SCHEDULES, QUICK = Any one of four most common types of sched- ules can be programmed. TIME = Hours and Minutes in the HHMM format. TIME/DATE STAMP = A recorded date and time that an event oc- curred. TIMEOUT = Immediate operation for a specified number of hours. UPLOAD = To send data from the AL-DTM or DL-Windows to the lock . USER = A person who has been provided with a USER CODE for ac- cess through the door. USER LOCKOUT, TOTAL = All User Codes have been disabled, thus locking out all Users (except for Master Code). Glossary (contd)
36 ALARM LOCK SYSTEMS, INC. (ALARM LOCK) war- rants its products to be free from manufacturing defects in materials and workmanship for 36 months following the date of manufacture. ALARM LOCK will, within said period, at its option, repair or replace any product failing to operate correctly without charge to the original pur- chaser or user. This warranty shall not apply to any equipment, or any part thereof, which has been repaired by others, im- properly installed, improperly used, abused, altered, damaged, subjected to acts of God, or on which any serial numbers have been altered, defaced or removed. Seller will not be responsible for any dismantling or rein- stallation charges. THERE ARE NO WARRANTIES, EXPRESS OR IM- PLIED, WHICH EXTEND BEYOND THE DESCRIP- TION ON THE FACE HEREOF. THERE IS NO EX- PRESS OR IMPLIED WARRANTY OF MERCHANT- ABILITY OR A WARRANTY OF FITNESS FOR A PAR- TICULAR PURPOSE. ADDITIONALLY, THIS WAR- RANTY IS IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF ALARM LOCK. Any action for breach of warranty, including but not lim- ited to any implied warranty of merchantability, must be brought within the six months following the end of the warranty period. IN NO CASE SHALL ALARM LOCK BE LIABLE TO ANYONE FOR ANY CONSEQUEN- TIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLERS OWN NEGLIGENCE OR FAULT. In case of defect, contact the security professional who installed and maintains your security system. In order to exercise the warranty, the product must be returned by the security professional, shipping costs prepaid and insured to ALARM LOCK. After repair or replacement, ALARM LOCK assumes the cost of returning products under warranty. ALARM LOCK shall have no obligation under this warranty, or otherwise, if the product has been repaired by others, improperly installed, improp- erly used, abused, altered, damaged, subjected to acci- dent, nuisance, flood, fire or acts of God, or on which any serial numbers have been altered, defaced or re- moved. ALARM LOCK will not be responsible for any dismantling, reassembly or reinstallation charges. This warranty contains the entire warranty. It is the sole warranty and any prior agreements or representations, whether oral or written, are either merged herein or are expressly cancelled. ALARM LOCK neither assumes, nor authorizes any other person purporting to act on its behalf to modify, to change, or to assume for it, any other warranty or liability concerning its products. In no event shall ALARM LOCK be liable for an amount in excess of ALARM LOCKs original selling price of the product, for any loss or damage, whether direct, indi- rect, incidental, consequential, or otherwise arising out of any failure of the product. Sellers warranty, as here- inabove set forth, shall not be enlarged, diminished or affected by and no obligation or liability shall arise or grow out of Sellers rendering of technical advice or ser- vice in connection with Buyers order of the goods fur- nished hereunder. ALARM LOCK RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEKLY. Warning: Despite frequent testing, and due to, but not limited to, any or all of the following; criminal tampering, electrical or communications disruption, it is possible for the system to fail to perform as expected. ALARM LOCK does not represent that the product/system may not be compromised or circumvented; or that the prod- uct or system will prevent any personal injury or prop- erty loss by burglary, robbery, fire or otherwise; nor that the product or system will in all cases provide adequate warning or protection. A properly installed and main- tained alarm may only reduce risk of burglary, robbery, fire or otherwise but it is not insurance or a guarantee that these events will not occur. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PER- SONAL INJURY, PROPERTY DAMAGE, OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. Therefore, the installer should in turn advise the consumer to take any and all precau- tions for his or her safety including, but not limited to, fleeing the premises and allig police or fire department, in order to mitigate the possibilities of harm and/or dam- age. ALARM LOCK is not an insurer of either the property or safety of the users family or employees, and limits its liability for any loss or damage including incidental or consequential damages to ALARM LOCKs original sell- ing price of the product regardless of the cause of such loss or damage. Some states do not allow limitations on how long an im- plied warranty lasts or do not allow the exclusion or limi- tation of incidental or consequential damages, or differ- entiate in their treatment of limitations of liability for ordi- nary or gross negligence, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. ALARM LOCK LIMITED WARRANTY