Air Live Router WT-2000AP User Manual

AirLive  WT-2000AP User’s  Manual 29 
c. Choose Disable DNS in the DNS Configuration tab. 
 
B. Configure IP manually 
a. Select Specify  an  IP  address in  the  IP  Address  tab.  The  default  IP  address  of  this 
product  is 192.168.1.254.  So  please  use  192.168.1.xxx (xxx is between  1 and  253) for 
IP Address field and 255.255.255.0 for Subnet Mask field. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
b. In  the  Gateway  tab,  add  the  IP  address  of  this  product  (default  IP  is...

 AirLive WT-2000AP User’s Manual 30 
 
 
c. In  the  DNS  Configuration  tab,  add  the  DNS  values  which  are  provided  by  the  ISP  into 
DNS Server Search Order field and click Add button. 
     
 
 
 
                                                                                                     

AirLive  WT-2000AP User’s  Manual 31 
AAAppppppeeennndddiiixxx   BBB   888000222...111xxx   SSSeeettttttiiinnnggg   
 
 Figure 1: Testing Environment (Use Windows 2000 Radius Server) 
1 Equipment Details 
PC1:  
Microsoft Windows XP Professional without Service Pack 1. 
AMIT 531C Wireless Cardbus:3.0.3.0 
Driver version:  
PC2:  
Microsoft Windows XP Professional with Service Pack 1a or latter. 
AMIT 561C Wireless Cardbus:1.0.1.0 
Driver version: 1.7.29.0 (Driver date: 10.20.2001) 
Authentication Server:...

 AirLive WT-2000AP User’s Manual 32 
3-1-2.  Setup DUT 
1.Enable the 802.1X (check the “Enable checkbox“). 
2.Enter the RADIUS server IP. 
3.Enter the shared key. (The key shared by the RADIUS server and DUT). 
4.We will change 802.1X encryption key length to fit the variable test  
condition. 
3-1-3.  Setup Network adapter on PC 
1.Choose the IEEE802.1X as the authentication method. (Fig 2) 
Note.  
Figure 2 is a setting picture of Windows XP without service pack 1. If users 
upgrade to service pack 1,...

AirLive  WT-2000AP User’s  Manual 33 
 
4. Windows 2000 RADIUS server Authentication testing: 
 
4.1DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.) 
1. Download and install the certificate on PC1. (Fig 4) 
2. PC1 choose the SSID of DUT as the Access Point. 
3. Set authentication type of wireless client and RADIUS server both to  
EAP_TLS. 
4. Disable the wireless connection and enable again. 
5. The DUT will send the users certificate to the RADIUS server, and then 
send...

 AirLive WT-2000AP User’s Manual 34 
Figure 5: Authenticating 
 
 
Figure 6: Authentication success 
 
4.2DUT authenticate PC2 using PEAP-TLS. 
1. PC2 choose the SSID of DUT as the Access Point. 
2. Set authentication type of wireless client and RADIUS server both to  
PEAP_TLS. 
3. Disable the wireless connection and enable again. 
4.The DUT will send the users certificate to the RADIUS server, and then 
send the message of authentication result to PC2. 
5. Windows XP will prompt that the authentication...

AirLive  WT-2000AP User’s  Manual 35 
AAAppppppeeennndddiiixxx   CCC   WWWDDDSSS   SSSeeettttttiiinnnggg   
 
How to setup and work: 
First, check the Wlan-mac address of AP1,AP2 and AP3.Please goto command mode and use  
“Arp –a ”. 
If you can not find the information of Mac, please make the cable to plug in lan-port of ap and ping the 
lan ip address then arp –a. There are some information in the screen. For example: 
    
 
AP 1:                                                  AP2:...

 AirLive WT-2000AP User’s Manual 36 
Blue Line:W ireless 
Black Line:W ire                 
 
 
If the Settings are ok,the client1 and client2 can get ip from dhcp server of    AP1.Then Client1 and  
Client2 can get information each other. 
 
AP1 Setting: 
AP1 AP2(Remote Mac: 00-50-18-00-0f-fd) 
AP1 AP3(Remote Mac: 00-50-18-00-0f-fc) 
 
 
  

AirLive  WT-2000AP User’s  Manual 37 
 
 
AP2 Setting: 
AP2 AP1(Remote Mac: 00-50-18-00-0f-fe) 
 
 
 
AP3 Setting 
AP3 AP1(Remote Mac: 00-50-18-00-0f-fe) 
 
 
 
 
 
 
 
  

 AirLive WT-2000AP User’s Manual 38 
 
AAAppppppeeennndddiiixxx   DDD   FFFAAAQQQ   aaannnddd   TTTrrrooouuubbbllleeessshhhooooootttiiinnnggg   
 
 
How do I connect AP by using wireless? 
 
1.How to start to use wireless? 
A: First, make sure that you already installed wireless client device in your computer. Then check the      
Configuration of wireless router. The default is as below:  
 
 
About wireless client, you will see wireless icon: 
 
Then click and will see the ap list that wireless client...