Air Live Router WT-2000AP User Manual

AirLive  WT-2000AP User’s  Manual 19 
WPA/WPA2 
Check Box was used to switch the function of the WPA. When the WPA function is enabled, the 
Wireless user must authenticate to this router first to use the Network service. RADIUS Server 
The router will detect automatically    which Security type(Wpa-psk version 1 or 2) the client  
uses to encrypt. 
IP address or the 802.1X server’s domain-name.  
Select RADIUS Shared Key 
If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F)...

 AirLive WT-2000AP User’s Manual 20 
  
 
 
  
 
4.6.4 MAC Address Control (Basic Setting Wireless Setting) 
 
 
MAC  Address  Control  allows  you  to  assign  different  access  right  for  different  users  and  to  assign  a 
specific IP address to a certain MAC address. 
MAC Address Control Check  “Enable”  to  enable  the  “MAC  Address  Control”.  All  of  the 
settings in this page will take effect only when “Enable” is checked. 
Connection control Check  Connection  control  to  enable  the...

AirLive  WT-2000AP User’s  Manual 21 
allow or deny to allow or deny the clients, whose MAC addresses are not 
in the Control table (please see below), to connect to this device. 
Association control Check Association control to enable the 
controlling of which wireless client can 
associate to the wireless LAN. If a client is 
denied to associate to the wireless LAN, it 
means the client cant send or receive any data 
via this device. Choose allow or deny to 
allow or deny the clients, whose MAC...

 AirLive WT-2000AP User’s Manual 22 
4.7 Advanced Settings 
 
 
4.7.1 System Time 
  
Set Date and Time using PC’s Date and Time 
Use PC Date and Time as Machine 
Set Date and Time manually 
Selected if you want to Set Date and Time manually.  
  

AirLive  WT-2000AP User’s  Manual 23 
4.8 Maintenance 
 
 
 
 
4.8.1 Change Password 
 
 
You can change Password here. We strongly recommend you to change the system password for 
security reason. 
 
  

 AirLive WT-2000AP User’s Manual 24 
4.8.2 View Log 
 
 
 
You can View system log by clicking the View Log button 
 
4.8.3 Firmware Upgrade 
 
 
 
You can upgrade firmware by clicking Firmware Upgrade button. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

AirLive  WT-2000AP User’s  Manual 25 
4.8.4 Backup Setting 
 
 
 
You can backup your settings by clicking the Backup Setting button and save it as a bin file. Once you 
want to restore these settings, please click Firmware Upgrade button and use the bin file you saved. 
 
4.8.5 Reset to default 
 
 
 
You can also reset this product to factory default by clicking the Reset to default button. 
 
4.8.6 Reboot 
 
 
 
You can also reboot this product by clicking the Reboot button. 
 
 
 
 
 
 
 
 
 
 
 
 
  

 AirLive WT-2000AP User’s Manual 26 
AAAppppppeeennndddiiixxx   AAA   TTTCCCPPP///IIIPPP   CCCooonnnfffiiiggguuurrraaatttiiiooonnn   fffooorrr   WWWiiinnndddooowwwsss   
999555///999888   
This  section  introduces  you  how  to  install  TCP/IP  protocol  into  your  personal  computer.  And  suppose 
you have been successfully installed one network card on  your personal computer. If not, please refer 
to your network card manual. Moreover, the Section B.2 tells you how to set TCP/IP values for working...

AirLive  WT-2000AP User’s  Manual 27 
 
 
3. Click Properties button to set the TCP/IP protocol for this NAT Router. 
4. Now, you have two setting methods:  

 AirLive WT-2000AP User’s Manual 28 
 
a. Select Obtain an IP address automatically in the IP Address tab. 
 
b. Don’t input any value in the Gateway tab.