Aiphone ISSOFT Operation Manual

11
GETTING STARTED APPENDIX
USING THE PC MASTER STATION
Door release
On a PC master station, you can release the door while being called from, communicating with, or monitoring a sub station if a door 
release device is connected to the station.
(→P. 18)
You can also unlock the door (door release device) connected to a sub station in a remote site depending on the setting.
* 
NOTE:
If the door station does not have a camera, you cannot view the image of the visitor. Confi rm the visitor securely.
orCall...

12
RECEIVING AND ANSWERING A CALL ON THE PC MASTER STATION
The following describes the communication method using a PC master station.
When receiving a call from a remote site, the operation methods are the same as described below, however it may take a longer 
* time for some operations and their responses. For example, there may be a time difference between a call starting at a remote site 
and the call tone ringing on the target (PC) master station in your site.
Receiving a call
The call tone rings,...

13
GETTING STARTED APPENDIX
USING THE PC MASTER STATION
Answering a call
The maximum duration of communication is preset in the 
System setting. (It can be set to a maximum of 10 minutes.)
Answer the call in one of the following ways.1 
■ Communication in the hands-free mode
(Available when “Communication method” is set to 
“HF” in the Setting window.)

Click 1) .
  After a beep, you can communicate in the hands-
free mode.
 *
1:  When talking: Lit
When listening to the caller: Off
When you have fi nished...

14
About the priority
The order of priority for actions (communication, calling, 
paging, monitoring, etc.) is as follows, depending on the 
priority setting.
Priority Setting Action
1 (high)[URGENT], [BROADCAST]*1Communication, 
calling, paging, 
chime paging. 2[PRIORITY]
3[NORMAL]
4 (low)- Monitoring, scan-
monitoring
Earlier call has priority over later call if the priority * setting is the same.
Communication takes priority over calling.
* However, when a call with higher priority comes in, the...

15
GETTING STARTED APPENDIX
USING THE PC MASTER STATION
Wide
Zoom
Viewing video images at a video door 
station
You can view video images at the target station when receiving 
a call from or communicating with a video door station, or 
monitoring a video door station in your site. The video images 
can be adjusted as necessary by using the following functions 
on the PC master station.
■ Switching Zoom/Wide
The display mode on the monitor can be switched between 
zoom and wide by each click of 
.
NOTES:...

16
■ Adjusting images
If the image on the monitor is diffi cult to see, you can adjust the 
image.
Click 1  when the image is diffi cult to see.
The backlight or night sensitivity is automatically adjusted.
The button stays lit during adjustment.
* 
The discrimination between day and night is performed * 
automatically by the door station.
To restore the image before adjustment
Click 
 again.
The lighting of button turns off and the image before adjustment 
is restored.
NOTE:
Clicking 
 at night may make...

17
GETTING STARTED APPENDIX
USING THE PC MASTER STATION
Transferring to another (PC) master station 
You can transfer a call received from a sub station to another 
(PC) master station while communicating with it (communication 
transferring), as well as setting calls to be automatically 
transferred in the Setting window.
For a call from another (PC) master station, you can transfer 
* 
it only when you are communicating with it. (However, you 
cannot transfer the communication to a remote site.)
■...

18
Door release
You can release the door while being called from, 
communicating with, or monitoring a sub station if a door 
release device is connected to the station. 
Click  while being called from, communicating with, or 
monitoring the sub station.
The door is released for the time set in the System setting on 
the IP host unit.
*  is lit while the door is released.
If the set release time is “0”, it can be released while the 
* 
button is clicked and held if the target station is in your site.
If...

19
GETTING STARTED APPENDIX
USING THE PC MASTER STATION
Searching for a station, zone or remote site 
Read this section before you perform calling, monitoring, paging or chime paging on a PC master station for the fi rst time to learn how 
to search for stations, zones or remote sites. The search can be performed in the following search methods by using the search items, 
dial keys or speed dial buttons to suit your needs.
PERFORMING CALLING, MONITORING, PAGING AND 
CHIME PAGING ON THE PC MASTER STATION...

20
[In the SEARCH LIST]
The search items are shown in the SEARCH LIST.
Click 
1  
 in the standby mode.
The search items are shown in the list area.
Click 2  repeatedly to select the target search item A to F (so that it is highlighted).
Click 3  to decide on the selected one.
NOTE:
You can also select the target search item and decide on it by a mouse click.
SEARCH LIST (page 1/2)
(Click 
◄ or ►.) (Click ◄ or ►.)
SEARCH LIST (page 2/2)
B STATIONS BY AREA (→P. 22)
A NAME SEARCH (→P. 21) SEARCH LIST
C...