Aimco Brakes Monitor UTM1500 Software Manual
Here you can view all the pages of manual Aimco Brakes Monitor UTM1500 Software Manual. The Aimco Brakes manuals for Monitors are available online for free. You can easily download all the documents as PDF.
Page 11
9 Statistics Statistical Chart ・Pick up data to display by selecting between All/OK/NOK in Search Criteria. ・Data will be saved in CSV format with “F.6 Save”. ・Start Controller memory data reception using “F.8 Receive”. Any data will be accepted regardless of Search Criteria selection. ・Memory data retained in Controller will be cleared when “F.9 Memory Clear” is selected. ・The maximum memory data for total works is 1,500. Statistical Graph...
Page 12
10 Data ・Select among All/1/2/3/4 to specify Work No. for data display. (1)Whenis selected, Statistica l Graph screen will appear. (2)To print out statistical data, select . (3)To return to Statistical Chart, select .
Page 13
11 Input/Output Check (1) Wiring condition check will be carried out through Input Terminal Block status monitoring and Output Terminal Block forced output. Items now under Input ON or Output ON state are indicated in red and the ones now under OFF state are displayed in green. (2) Clicking an item now under ON state will turn it to OFF state, while clicking an item now under OFF state will turn it to ON state. (3) The item names correspondent to the names...
Page 14
12 Tool Management To ol Name Type in “Model” and “Number”. Allowable Range: 0~14 characters Initial Value: 0 character Cycle Count/Cumulative Pulse Number When the tightening number and the pulse number attained the values preset on Cycle Count Output and Cumulative Pulse Number Output, the messages input on Display Message columns will be displayed on Controller Unit and then outputs will be produced from the terminal block. Cycle Count Output 1/2 Allowable Range: 0~999999 Initial Value:...
Page 15
13Environment Setting Communication Rate ・Select from among “AUTO/19200/38400/57600/ 115200 bps”. ・In the case of AUTO setting, communication rate will automatically be recognized at the initial contact after setting. ・Initial value for PC and Controller is both 38400bps. Note: Changing Controller communication rate once communication has been established with Controller at the initial contact under AUTO setting will cause a communication rate...
Page 16
AIMCO CORPORATE HEADQUARTERS 10000 SE Pine Street Portland, Oregon 97216 Phone: (503) 254– 6600 Toll Free: 1 -800- 852-1368 AIMC O CHINA Room 607, No. 3998 Hongxin Rd Dibao Plaza Minhang District, Shanghai China Phone: 0086 -21- 34319246 Fax: 0086- 21-34319245 LIT-MA N730 Rev. 03/2016 Printed in USA ©2016 AIMCO AIMCO C ORPORATION D E MEXICO S A DE CV Ave. C ristobal C olon 14529 Chihuahua, C hihuahua. 31125 Mexico P hone: ( 01-614) 380- 1010 Fax: (01 -614) 380- 1019...