Home > AEM > Wideband UEGO Air/Fuel Controllers > AEMnet Adapter for Wideband Failsafe 304900 303439 User Manual

AEMnet Adapter for Wideband Failsafe 304900 303439 User Manual

Add to Favourites
    Download as PDF

    View the AEMnet Adapter for Wideband Failsafe 304900 303439 User Manual for free. All the AEM manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 30-3439 AEMnet HARNESS INSTALLATION INSTRUCTIONS ENGINEER: JT DATE LAST MODIFIED: 7/9/2013 Page 1 of 4 Overview The following instructions describe the proper installation of the AEMnet Harness (30-3439), which is used to connect the Wideband Failsafe AEMnet communication lines to a second (or multiple) AEMnet device(s). Included Items Item # Description Req. Quantity 30-3439 AEMnet Harness for Wideband Failsafe 1 Steps 1. Step 1 is Optional - Disconnect the...
    Page 2 30-3439 AEMnet HARNESS INSTALLATION INSTRUCTIONS ENGINEER: JT DATE LAST MODIFIED: 7/9/2013 Page 2 of 4 2. Locate the green and white pre-crimped terminals on the end of the AEMnet Harness. Figure 2 below shows the Wideband Failsafe connector and pinout including the green and white leads from the AEMnet harness. Figure 2 3. Before inserting the terminals into the connector, refer to Figure 3 to be sure that the locking mechanism on the terminals is positioned properly in...
    Page 3 30-3439 AEMnet HARNESS INSTALLATION INSTRUCTIONS ENGINEER: JT DATE LAST MODIFIED: 7/9/2013 Page 3 of 4 4. Insert the AEMnet+ terminal (white wire) into the available Pin 13 on the Wideband Failsafe connector. Push the wire in until the locking mechanism on the terminal and connector lock into place. Pull lightly on the white wire to confirm the locking mechanism has latched. Figure 4 below shows the correct placement of the AEMnet+ terminal. Figure 4 5. Insert the...
    Page 4 30-3439 AEMnet HARNESS INSTALLATION INSTRUCTIONS ENGINEER: JT DATE LAST MODIFIED: 7/9/2013 Page 4 of 4 6. Reconnect the Wideband Failsafe 16-pin connecter to the gauge if it was disconnected in Step 1. 7. Connect the Deutsch connector on the opposite end of the AEMnet harness to a mating Deutsch connector on a second device with AEMnet capabilities. The AEMnet harness includes a male and female Deutsch connector, allowing AEMnet devices to be daisy-chained together.
    Start reading AEMnet Adapter for Wideband Failsafe 304900 303439 User Manual

    Related Manuals for AEMnet Adapter for Wideband Failsafe 304900 303439 User Manual

    All AEM manuals