AEG Oven BP831660KM User Manual

							ENUser ManualOvenBP831660K    
						

							CONTENTS
1. SAFETY INFORMATION.................................................................................................3
2.  SAFETY INSTRUCTIONS................................................................................................ 4
3.  PRODUCT DESCRIPTION.............................................................................................. 7
4.  CONTROL PANEL........................................................................................................... 8
5.  BEFORE FIRST USE......................................................................................................... 9
6.  QUICK GUIDE................................................................................................................10
7.  DAILY USE......................................................................................................................11
8.  ASSISTED COOKING................................................................................................... 20
9.  USING THE ACCESSORIES.......................................................................................... 24
10.  ADDITIONAL FUNCTIONS........................................................................................ 27
11.  HINTS AND TIPS......................................................................................................... 27
12.  CARE AND CLEANING.............................................................................................. 43
13.  TROUBLESHOOTING.................................................................................................45
14.  ENERGY EFFICIENCY.................................................................................................46
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes
reading to get the very best from it. Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfserviceRegister your product for better service:
www.registeraeg.comBuy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shopCUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
 Warning / Caution-Safety information
 General information and tips
 Environmental information
Subject to change without notice.
www.aeg.com2       
						

							1.  SAFETY INFORMATION
Before the installation and use of the appliance,carefully read the supplied instructions. The manufacturer is not responsible if an incorrect
installation and use causes injuries and damages. Always keep the instructions with the appliance for future
reference.
1.1  Children and vulnerable people safety
•This appliance can be used by children aged from 8
years and above and persons with reduced physical,sensory or mental capabilities or lack of experienceand knowledge if they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
• If the appliance has a child safety device, we
recommend you activate it.
• Cleaning and user maintenance shall not be made by
children without supervision.
• Children of less than 3 years should be kept away
unless continuously supervised.
1.2  General Safety
•
Only a qualified person must install this appliance and
replace the cable.
• Internally the appliance becomes hot when in
operation. Do not touch the heating elements that are in the appliance. Always use oven gloves to remove or
put in accessories or ovenware.
• Before maintenance cut the power supply.
ENGLISH3  
						

							•Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
• Excess spillage must be removed before the pyrolytic
cleaning. Remove all parts from the oven.
• To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the side walls. Install the shelf supports in the oppositesequence.
• The means for disconnection must be incorporated in
the fixed wiring in accordance with the wiring rules.
• Only use the core temperature sensor recommended
for this appliance.2.  SAFETY INSTRUCTIONS2.1  InstallationWARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Always be careful when you move the appliance because it is heavy. Alwayswear safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the other appliances and units.
• Make sure that the appliance is installed below and adjacent safestructures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.2.2  Electrical connectionWARNING!
Risk of fire and electrical
shock.
• All electrical connections should be made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agrees
with the power supply. If not, contact
an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains
www.aeg.com4   
						

							cable. Should the mains cable need
to be replaced, this must be carried out by our Authorised Service Centre.
• Do not let mains cables touch or come near the appliance door,
especially when the door is hot.
• The shock protection of live and insulated parts must be fastened in
such a way that it cannot be removed without tools.
• Connect the mains plug to the mains socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an isolation device which lets you
disconnect the appliance from the mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
• This appliance complies with the E.E.C. Directives.2.3  UseWARNING!
Risk of injury, burns and
electrical shock or explosion.
• Use this appliance in a household only.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are not blocked.
• Do not let the appliance stay unattended during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance door while the appliance is
in operation. Hot air can release.
• Do not operate the appliance with wet hands or when it has contact with
water.
• Do not apply pressure on the open door.
• Do not use the appliance as a work surface or as a storage surface.
• Open the appliance door carefully. The use of ingredients with alcohol
can cause a mixture of alcohol and air.
• Do not let sparks or open flames to come in contact with the appliance
when you open the door.
• Do not put flammable products or items that are wet with flammableproducts in, near or on the appliance.WARNING!
Risk of damage to the
appliance.
• To prevent damage or discoloration to the enamel:– do not put ovenware or other objects in the appliance directly
on the bottom.
– do not put aluminium foil directly on the bottom of the appliance.
– do not put water directly into the hot appliance.
– do not keep moist dishes and food in the appliance after you
finish the cooking.
– be careful when you remove or install the accessories.
• Discoloration of the enamel has no effect on the performance of the
appliance. It is not a defect in the
sense of the warranty law.
• Use a deep pan for moist cakes. Fruit juices cause stains that can be
permanent.
• This appliance is for cooking purposes only. It must not be used for
other purposes, for example room heating.
• Always cook with the oven door closed.
• If the appliance is installed behind a furniture panel (e.g. a door) make surethe door is never closed when the
appliance is in operation. Heat and moisture can build up behind a
closed furniture panel and cause
subsequent damage to the appliance,
the housing unit or the floor. Do not
close the furniture panel until the
appliance has cooled down
completely after use.
ENGLISH5   
						

							2.4 Care and cleaningWARNING!
Risk of injury, fire, or damage
to the appliance.
• Before maintenance, deactivate the
appliance and disconnect the mainsplug from the mains socket.
• Make sure the appliance is cold. There is the risk that the glass panelscan break.
• Replace immediately the door glass panels when they are damaged.
Contact the Authorised Service
Centre.
• Be careful when you remove the door from the appliance. The door is
heavy!
• Clean regularly the appliance to prevent the deterioration of the
surface material.
• Remaining fat or food in the appliance can cause fire.
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
• If you use an oven spray, obey the safety instructions on the packaging.
• Do not clean the catalytic enamel (if applicable) with any kind of
detergent.
2.5  Pyrolytic cleaningRisk of Injury / Fires /
Chemical Emissions (Fumes)
in Pyrolitic Mode.
• Before carrying out a Pyrolitic self- cleaning function or the First Use
please remove from the oven cavity: – any excess food residues, oil or grease spills / deposits.
– any removable objects (including shelves, side rails etc., providedwith the product) particularly anynon-stick pots, pans, trays,
utensils etc.
• Read carefully all the instructions for Pyrolytic cleaning.
• Keep children away from the
appliance while the Pyrolytic cleaningis in operation.
The appliance becomes very hot and
hot air is released from the front
cooling vents.
• Pyrolytic cleaning is a high temperature operation that can
release fumes from cooking residues and construction materials, as such
consumers are strongly advised to: – provide good ventilation during and after each Pyrolytic cleaning.
– provide good ventilation during and after the first use at maximum
temperature operation.
• Unlike all humans, some birds and
reptiles can be extremely sensitive to
potential fumes emitted during the
cleaning process of all Pyrolytic Ovens. – Remove any pets (especially birds) from the vicinity of the appliance
location during and after the
Pyrolytic cleaning and first use
maximum temperature operation
to a well ventilated area.
• Small pets can also be highly sensitive to the localized temperature changesin the vicinity of all Pyrolytic Ovens
when the Pyrolytic self cleaning
program is in operation.
• Non-stick surfaces on pots, pans, trays, utensils etc., can be damagedby the high temperature Pyrolytic
cleaning operation of all Pyrolytic
Ovens and can be also a source for
low level harmful fumes.
• Fumes released from all Pyrolytic Ovens / Cooking Residues as
described are not harmful to humans,
including infants or persons with
medical conditions.2.6  Internal light
• The type of light bulb or halogen
lamp used for this appliance is only
for household appliances. Do not use
it for house lighting.
WARNING!
Risk of electrical shock.
• Before replacing the lamp, disconnect the appliance from the power supply.
• Only use lamps with the same specifications.
www.aeg.com6    
						

							2.7 DisposalWARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the
appliance.
2.8  Service
• To repair the appliance contact an Authorised Service Centre.
• Use original spare parts only.3.  PRODUCT DESCRIPTION3.1  General overview1Control panel2
Electronic programmer
3
Socket for the core temperature
sensor
4
Heating element
5
Lamp
6
Fan
7
Shelf support, removable
8
Shelf positions
3.2  Accessories
Wire shelf
For cookware, cake tins, roasts.
Baking tray
For cakes and biscuits.
Grill- / Roasting pan
To bake and roast or as a pan to collect fat.
ENGLISH7 2
7
1
8
4
3
5
6
5
4 3 2 1     
						

							Trivet
For roasting and grilling.
Use the trivet only with the
Grill- / Roasting pan.
Core temperature sensor
To measure how far the food is cooked.
Telescopic runners
For shelves and trays.
4.  CONTROL PANEL4.1  Electronic programmer
Use the sensor fields to operate the appliance.
Sensor
fieldFunctionComment1ON / OFFTo activate and deactivate the appliance.2-DisplayIt shows the current settings of the appliance.www.aeg.com8    12345   
						

							Sensor
fieldFunctionComment3FavouritesIt contains a list of favourite cooking programmes
made by the user.4Minute MinderTo set the function: Minute Minder. Straight ac-
cess to the time functions.5Assisted CookingStraight access to the menus: Cookbook and Quickstart when the appliance is active.The sensor fields for:
Favourites, Minute Minder
and Assisted Cooking are
visible only when the
appliance is active.4.2  Display
After activating, the appliance shows a
basic heating function mode.A. Return to menu
B. Current set heating function
C. Current set temperature
D. Clock
E. Start
Other indicators of the display:
SymbolFunctionChange of the text sizeMore optionsCore temperature sensorHeat + HoldLock5.  BEFORE FIRST USEWARNING!
Refer to Safety chapters.5.1  Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.ENGLISH9    11:09
150° start
Menu
ABDC
E        
						

							Refer to "Care and
cleaning" chapter.
Clean the appliance before first use.
Put the accessories and the removable shelf supports back to their initial
position.
5.2  Software licence
The software included in this product
contains copyrighted software that is licensed under the BSD, fontconfig, FTL,
GPL-2.0, LGPL-2.0, LGPL-2.1, libJpeg,
zLib/ libpng, MIT, OpenSSL / SSLEAY
and others.
It is possible to display the complete copy of the licences in the device on the
TFT screen display by following through the menu the path:  Base Settings /
Service / Licence .
It is possible to download the source
code of the open source software used
in the product by following the hyperlink
present in the web product page.5.3  First Connection
When you connect the appliance to the
mains you have to set:
• the language
• time
• clock format
• date
• fast heat-up
• odour filter
The chosen name or number can be set
in two ways. Scroll it to the required
position or touch the chosen option. You
can change the settings in the menu:
Base Settings.
6.  QUICK GUIDE6.1  Using the touchscreen
• To scroll the menu use a quick gesture or drag your finger across thedisplay.
• The strength of the gesture determines how fast the screenmoves.
• The scroll movement can stop by itself or you can stop it immediately if
you touch the display.
• The chosen function activates when you release the finger from the
display.
• To activate a menu function touch the display on the selected function.
• You can change any parameter shown on the display when you touch it.
• To set the required function, time or temperature you can scroll through
the list or touch the option you want
to choose.
• When you activate a heating function the  Menu  does not appear on the
display. Touch the display anywhere and the  Menu appears again.
• When the appliance is active, and some of the symbols disappear from
the display, touch the display
anywhere. All the symbols come back
on.• After you set some functions a pop-
up window appears with additional
information.
• The temperature can switch places on the display with other functions that
are in the bottom right and left
corner.When you press and hold an
option in the menu, a short
description of the option
appears.
www.aeg.com10 11:09
150° 20min
33min
start
Menu