AEG Oven BP831460KM User Manual

6. DAILY USEWARNING!
Refer to Safety chapters.6.1  Navigating the menus
1.Activate the appliance.
2. Press 
 or  to select the menu
option.
3. Press  to move to the submenu or
accept the setting.At each point you can go
back to the main menu with
.
6.2  The menus in overview
Main menuSym-
bolMenu itemApplicationAssisted CookingContains a list of automatic programmes.Heating FunctionsContains a list of heating functions.PyrolysisPyrolytic cleaning.Basic SettingsYou can use it to set other...

Sym-
bolSubmenuDescriptionBuzzer VolumeAdjusts the volume of press-tones and signals by
degrees.Key TonesActivates and deactivates the tone of the touch
fields. It is not possible to deactivate the tone of
the ON / OFF touch field.Alarm/Error TonesActivates and deactivates the alarm tones.Cleaning ReminderReminds you when to clean the appliance.Odour FilterActivates or deactivates the function. Prevents
smell during cooking. When off, it cleans itself pe-
riodically.ServiceShows the software version and...

Heating functionApplicationGrillingTo grill flat food and to toast bread.Moist Fan BakingTo save energy when you bake and cook dry
baked goods. Also to bake baked goods in tins
on 1 shelf position. This function was used to de-
fine the energy efficiency class acc. EN50304.Keep WarmTo keep food warm.DefrostTo defrost frozen food.Bottom HeatTo bake cakes with crispy bottom and to preserve
food.Dough ProvingFor controlled rising of yeast dough before bak-
ing.Bread BakingTo bake bread.Au GratinFor dishes...

6.6 Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold 
 for 3
seconds. The heat-up indicator
alternates.
6.7  Residual heat
When you deactivate the appliance, the display shows the residual heat. You can
use the heat to keep the food warm.7.  CLOCK FUNCTIONS7.1  Clock functions tableClock functionApplicationMinute MinderTo set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the...

3.Press  or  to set the necessary
time.
4. Press 
 to confirm.
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press a sensor field to stop the
signal.
7.3  Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It activates after the baking or
roasting procedure ends.
You can activate or deactivate the
function...

8.3 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press 
 to confirm.
3. Select the category and dish. Press
 to confirm.
4. Select the function: Weight
Automatic. Press 
 to confirm.
5. Touch 
 or  to set the food
weight. Press 
 to confirm.
The automatic programme starts.
6. You can change the weight at any
time. Press 
 or  to change...

When the meat is at the set core
temperature, an acoustic signal sounds. The appliance deactivates automatically.
7. Touch a sensor field to stop the
signal.
8. Remove the core temperature sensor
plug from the socket and remove the
meat from the oven.WARNING!
The core temperature sensor
is hot. There is a risk of
burns. Be careful when you
remove the tip and the plug
of the core temperature
sensor.9.2  Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of the shelf support and...

Baking tray or deep pan:
Put the baking tray or deep pan on the
telescopic runners.
Wire shelf and deep pan together:
Put the wire shelf on the deep pan. Put
the wire shelf and the deep pan on the
telescopic runners.
9.4  Trivet and Grill- / Roasting
panWARNING!
Be careful when you remove
the accessories from a hot
appliance. There is a risk of
burns.You can use the trivet to roast larger pieces of meat or poultry on one shelf
position.
1. Put the trivet into the deep pan so
that the supports of the wire...

The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold 
 to save.
You can overwrite a memory position.
When the display shows the first free
memory position, touch 
 or  and
press 
 to overwrite an existing
programme.
You can change the name of a
programme in the menu: Edit
Programme Name.
Activating the programme
1. Activate the appliance.
2. Select the menu: Favourite
Programme.
3. Press 
 to confirm.
4. Select your favourite programme
name.
5. Press 
 to confirm.
Press 
 to go...

Temperature (°C)Switch-off time (h)30 - 11512.5120 - 1958.5200 - 2455.5250 - maximum1.5The Automatic switch-off
does not work with the
functions: Light, core
temperature sensor, End
Time, Duration.10.6  Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness: – when the appliance is activated.
– if you touch a sensor field during the night brightness (apart...