AEG Oven BP831460KM User Manual

							6. DAILY USEWARNING!
Refer to Safety chapters.6.1  Navigating the menus
1.Activate the appliance.
2. Press 
 or  to select the menu
option.
3. Press  to move to the submenu or
accept the setting.At each point you can go
back to the main menu with
.
6.2  The menus in overview
Main menuSym-
bolMenu itemApplicationAssisted CookingContains a list of automatic programmes.Heating FunctionsContains a list of heating functions.PyrolysisPyrolytic cleaning.Basic SettingsYou can use it to set other settings.Favourite ProgrammeContains a list of favourite cooking programmes
created by the user.
Submenu for: Basic Settings
Sym-
bolSubmenuDescriptionSet Time of DaySets the current time on the clock.Time IndicationWhen ON, the display shows the current time
when you deactivate the appliance.Set + GoWhen ON, in the Select Options window you can
choose the function: Set + Go.Heat + HoldWhen ON, in the Select Options window you can
choose the function: Heat + Hold.Extra TimeActivates and deactivates the time extension
function.Display ContrastAdjusts the display contrast by degrees.Display BrightnessAdjusts the display brightness by degrees.Set LanguageSets the language for the display.ENGLISH11                    
						

							Sym-
bolSubmenuDescriptionBuzzer VolumeAdjusts the volume of press-tones and signals by
degrees.Key TonesActivates and deactivates the tone of the touch
fields. It is not possible to deactivate the tone of
the ON / OFF touch field.Alarm/Error TonesActivates and deactivates the alarm tones.Cleaning ReminderReminds you when to clean the appliance.Odour FilterActivates or deactivates the function. Prevents
smell during cooking. When off, it cleans itself pe-
riodically.ServiceShows the software version and configuration.Factory SettingsResets all settings to factory settings.6.3  Heating FunctionsHeating functionApplicationTrue Fan CookingTo bake on up to 3 shelf positions at the same
time and to dry food. Set the temperature 20 - 40
°C lower than for the function: Conventional
Cooking.Pizza SettingTo bake food on 1 shelf position for a more inten-
sive browning and a crispy bottom. Set the tem-
perature 20 - 40 °C lower than for the function:
Conventional Cooking.Slow CookingTo prepare tender, succulent roasts.Conventional CookingTo bake and roast food on 1 shelf position.Frozen FoodsTo make your convenience food like e.g. French
Fries, Wedges, spring rolls crispy.Turbo GrillingTo roast larger meat joints or poultry with bones
on 1 shelf position. Also to make gratins and to
brown.Fast GrillingTo grill flat food in large quantities and to toast
bread.www.aeg.com12               
						

							Heating functionApplicationGrillingTo grill flat food and to toast bread.Moist Fan BakingTo save energy when you bake and cook dry
baked goods. Also to bake baked goods in tins
on 1 shelf position. This function was used to de-
fine the energy efficiency class acc. EN50304.Keep WarmTo keep food warm.DefrostTo defrost frozen food.Bottom HeatTo bake cakes with crispy bottom and to preserve
food.Dough ProvingFor controlled rising of yeast dough before bak-
ing.Bread BakingTo bake bread.Au GratinFor dishes such as lasagna or potato gratin. Also
to gratinate and brown.PreservingTo make vegetable preserves such as pickles.DryingTo dry sliced fruit (e.g. apples, plums, peaches)
and vegetables (e.g. tomatoes, zucchini, mush-
rooms).Plate WarmingTo preheat your plate for serving.ECO RoastingThe ECO functions let you optimize the energy
consumption during cooking. It is necessary to set
the cooking time first. To get more information
about the recommended settings, refer to the
cooking tables with the equivalent function.6.4  Activating a heating
function
1. Activate the appliance.
2. Select the menu: Heating Functions.
3. Press 
 to confirm.
4. Set a heating function.
5. Press 
 to confirm.
6.Set the temperature.
7. Press 
 to confirm.
6.5  Heat-up indicator
When you activate a heating function,
the bar on the display comes on. The bar
shows that the temperature increases.
ENGLISH13                
						

							6.6 Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold 
 for 3
seconds. The heat-up indicator
alternates.
6.7  Residual heat
When you deactivate the appliance, the display shows the residual heat. You can
use the heat to keep the food warm.7.  CLOCK FUNCTIONS7.1  Clock functions tableClock functionApplicationMinute MinderTo set a countdown (max. 2 h 30 min). This
function has no effect on the operation of the
appliance. You can also activate it when the
appliance is deactivated.
Use 
 to activate the function. Press  or
 to set the minutes and  to start.
DurationTo set the length of an operation (max. 23 h
59 min).End TimeTo set the switch-off time for a heating func-
tion (max. 23 h 59 min).If you set the time for a clock function,
the time starts to count down after 5
seconds.If you use the clock
functions: Duration, End
Time, the appliance
deactivates the heating
elements after 90 % of the
set time. The appliance uses
the residual heat to continue
the cooking process until the
time ends (3 - 20 minutes).7.2  Setting the clock functions• Before you use the
functions: Duration, End
Time, you must set a
heating function and
temperature first. The
appliance deactivates
automatically.
• You can use the functions: Duration and
End Time at the same
time if you want to
automatically activate
and deactivate the
appliance on a given time
later.
• The functions: Duration and End Time do not
work when you use the
core temperature sensor.
1. Set a heating function.
2. Press 
 again and again until the
display shows the necessary clock
function and the related symbol.
www.aeg.com14            
						

							3.Press  or  to set the necessary
time.
4. Press 
 to confirm.
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press a sensor field to stop the
signal.
7.3  Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It activates after the baking or
roasting procedure ends.
You can activate or deactivate the
function in the menu: Basic Settings.
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press 
 again and again until the
display shows: Heat + Hold.
5. Press  to confirm.
When the function ends, an acoustic
signal sounds.
The function stays on if you change the
heating functions.7.4  Extra Time
The function: Extra Time makes the
heating function continue after the end of Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the core
temperature sensor.
1. When the cooking time ends, an
acoustic signal sounds. Press a
sensor field.
The display shows the message.
2. Press 
 to activate or  to
cancel.
3. Set the length of the function.
4. Press 
.
8.  AUTOMATIC PROGRAMMESWARNING!
Refer to Safety chapters.8.1  Recipes onlineYou can find the recipes for
the automatic programmes
specified for this appliance
on our website. To find the
proper Recipe Book check
the PNC number on the
rating plate on the front
frame of the appliance
cavity.8.2  Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
1. Activate the appliance.
2.Select the menu: Assisted Cooking.
Press 
 to confirm.
3. Select the category and dish. Press
 to confirm.
4. Select a recipe. Press 
 to confirm.
When you use the function:
Manual, the appliance uses
the automatic settings. You
can change them as with
other functions.ENGLISH15                
						

							8.3 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press 
 to confirm.
3. Select the category and dish. Press
 to confirm.
4. Select the function: Weight
Automatic. Press 
 to confirm.
5. Touch 
 or  to set the food
weight. Press 
 to confirm.
The automatic programme starts.
6. You can change the weight at any
time. Press 
 or  to change the
weight.
7. When the time ends, an acoustic
signal sounds. Press a sensor field to
deactivate the signal.
With some programmes turn
over the food after 30
minutes. The display shows a
reminder.9.  USING THE ACCESSORIESWARNING!
Refer to Safety chapters.9.1  Core temperature sensor
There are two temperatures to be set:
the oven temperature and the coretemperature.
The core temperature sensor measures
the core temperature of the meat. When the meat is at the set temperature, theappliance deactivates.
CAUTION!
Only use the core
temperature sensor supplied or the correct replacement
parts.The core temperature sensor
must stay in the meat and in
the socket during the
cooking.
1. Activate the appliance.
2. Put the tip of the core temperature
sensor into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows the core temperature
sensor symbol.
4. Press 
 or  in less than 5
seconds to set the core temperature.
5. Set the heating function and, if
necessary, the oven temperature.
The appliance calculates an approximate end time. The end time is different for
the different quantities of the food, the
set oven temperatures (minimum 120 °C)
and the operating modes. The appliance calculates the end time in approximately
30 minutes.
6. To change the core temperature,
press 
.
www.aeg.com16                 
						

							When the meat is at the set core
temperature, an acoustic signal sounds. The appliance deactivates automatically.
7. Touch a sensor field to stop the
signal.
8. Remove the core temperature sensor
plug from the socket and remove the
meat from the oven.WARNING!
The core temperature sensor
is hot. There is a risk of
burns. Be careful when you
remove the tip and the plug
of the core temperature
sensor.9.2  Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide bars of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wireshelf on the guide bars above.• All accessories have small indentations at the top of
the right and left side to
increase safety. The
indentations are also anti-
tip devices.
• The high rim around the shelf is a device which
prevents cookware from
slipping.9.3  Telescopic runners -
inserting the accessoriesCAUTION!
Make sure you push back the telescopic runners fully
in the appliance before you
close the oven door.
Wire shelf:
Put the wire shelf on the telescopic
runners so that the feet point
downwards.
The high rim around the wire
shelf is a special device to
prevent the cookware from
slipping.ENGLISH17         
						

							Baking tray or deep pan:
Put the baking tray or deep pan on the
telescopic runners.
Wire shelf and deep pan together:
Put the wire shelf on the deep pan. Put
the wire shelf and the deep pan on the
telescopic runners.
9.4  Trivet and Grill- / Roasting
panWARNING!
Be careful when you remove
the accessories from a hot
appliance. There is a risk of
burns.You can use the trivet to roast larger pieces of meat or poultry on one shelf
position.
1. Put the trivet into the deep pan so
that the supports of the wire shelf
point up.
2. Put the deep pan into the oven on
the necessary shelf position.
You can use the trivet to grill flat dishes
in large quantities and to toast.
1. Put the trivet into the deep pan so
that the supports of the wire shelf
point down.
2. Put the deep pan into the oven on
the necessary shelf position.
10.  ADDITIONAL FUNCTIONS10.1 
Favourite Programme
You can save your favourite settings,
such as duration, temperature or heating function. They are available in the menu:
Favourite Programme. You can save 20
programmes.Saving a programme
1. Activate the appliance.
2. Set a heating function or an
automatic programme.
3. Touch  again and again until the
display shows: SAVE.
4. Press 
 to confirm.
The display shows the first free memory
position.
5. Press 
 to confirm.
6. Enter the name of the programme.
The first letter flashes.
7. Touch 
 or  to change the
letter.
8. Press 
.
www.aeg.com18            
						

							The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold 
 to save.
You can overwrite a memory position.
When the display shows the first free
memory position, touch 
 or  and
press 
 to overwrite an existing
programme.
You can change the name of a
programme in the menu: Edit
Programme Name.
Activating the programme
1. Activate the appliance.
2. Select the menu: Favourite
Programme.
3. Press 
 to confirm.
4. Select your favourite programme
name.
5. Press 
 to confirm.
Press 
 to go directly to menu:
Favourite Programme. You can also use
it when the appliance is deactivated.
10.2  Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.
If the Pyrolysis function
operates, the door locks
automatically.
A message comes on in the
display when you touch a
sensor field.
1. Activate the appliance.
2. Touch 
 and  at the same time
until the display shows a message.
To deactivate the Child Lock function
repeat step 2.
10.3  Function Lock
This function prevents an accidental
change of the heating function. You can
activate it only when the appliance
operates.
1. Activate the appliance.
2. Set a heating function or setting.
3. Press 
 again and again until the
display shows: Function Lock.
4. Press  to confirm.If the Pyrolysis function
operates, the door is locked
and the symbol of a key
comes on in the display.
To deactivate the function, press . The
display shows a message. Press 
 again
and then 
 to confirm.
When you deactivate the
appliance, the function also
deactivates.10.4  Set + Go
The function lets you set a heating
function (or a programme) and use it
later with one press of a sensor field.
1. Activate the appliance.
2. Set a heating function.
3. Press 
 again and again until the
display shows: Duration.
4. Set the time.
5. Press 
 again and again until the
display shows: Set + Go.
6. Press 
 to confirm.
Press a sensor field (except for 
) to
start the function: Set + Go. The set
heating function starts.
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when
the heating function
operates.
• The menu: Basic Settings lets you activate and
deactivate the function:
Set + Go.10.5  Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if a heating function operates and you do not change any settings.
ENGLISH19                       
						

							Temperature (°C)Switch-off time (h)30 - 11512.5120 - 1958.5200 - 2455.5250 - maximum1.5The Automatic switch-off
does not work with the
functions: Light, core
temperature sensor, End
Time, Duration.10.6  Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness: – when the appliance is activated.
– if you touch a sensor field during the night brightness (apart fromON / OFF), the display goes backto the day brightness mode forthe next 10 seconds.
– if the appliance is deactivated and you set the function: Minute
Minder. When the function ends, the display goes back to the nightbrightness.10.7  Cooling fan
When the appliance operates, the
cooling fan activates automatically to keep the surfaces of the appliance cool.If you deactivate the appliance, thecooling fan can continue to operate untilthe appliance cools down.
11.  HINTS AND TIPSWARNING!
Refer to Safety chapters.The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.11.1  Inner side of the door
In some models, on the inner side of
the door you can find:
• the numbers of the shelf positions.
• information about the heating functions, recommended shelf
positions and temperatures for typical
dishes.
11.2  Advice for special heating
functions of the ovenKeep Warm
Use this function if you want to keep food warm.
The temperature regulates itself
automatically to 80 °C.Plate Warming
For warming plates and dishes.
Distribute plates and dishes evenly on
the wire shelf. Move stacks around after half of the warming time (swap top and
bottom).
The automatic temperature is 70 °C.
Recommended shelf position: 3.
Dough Proving
You can use this automatic function with
any recipe for yeast dough you like. It
gives you a good atmosphere for rising.
Put the dough into a dish that is big
enough for rising and cover it with a wet
towel or plastic foil. Insert a wire shelf on
the first shelf position and put the dish in.
Close the door and set the function:
Dough Proving. Set the necessary time.
www.aeg.com20