AEG Oven BP730402KM User Manual

6.2 Oven functionsOven functionApplicationTrue Fan Cook-
ingTo bake on up to 3 shelf positions at the same time and
to dry food. Set the temperature 20 - 40 °C lower than
for Conventional Cooking.Pizza SettingTo bake food on 1 shelf position for a more intensive
browning and a crispy bottom. Set the temperature 20
- 40 °C lower than for Conventional Cooking.Slow CookingTo prepare tender, succulent roasts.Conventional
CookingTo bake and roast food on 1 shelf position.Frozen FoodsTo make your convenience...

6.3 Setting the oven function
1. Activate the appliance with 
 or .
The display shows the set temperature,
the symbol and the number of the oven function.
2. Touch 
 or  to set an oven
function.
3. Touch 
 or the appliance starts
automatically after five seconds.
If you activate the appliance
and do not set an oven
function or programme, the
appliance deactivates
automatically after 20
seconds.6.4  Changing the temperature
Touch  or  to change the
temperature in steps of 5 °C.
When the appliance is at...

7.2 Count Up TimerThe Count Up Timer is not
activated if Duration and
End are set.
The Count Up Timer starts to count when
the appliance starts to heat.
1. To reset the Count Up Timer, touch
 again and again until  flashes in
the display.
2. Touch 
 until the display shows
"00:00" and the Count Up Timer
starts to count up again.
7.3  Setting the DURATION
1.Activate the appliance and set an
oven function and temperature.
2. Touch 
 again and again until the
display shows 
.
 flashes in the...

When the set time ends, an acousticsignal sounds for two minutes and 00:00
and 
 flash in the display.
5. Touch a sensor field or open the
oven door to stop the acoustic
signal.
7.7  Setting the Time delay
function
The DURATION  and END  can be
used at the same time, if the appliance is
to be switched on and off automatically
later. In this case, first set the DURATION
 and then the END  function (refer
to "Setting the DURATION" and
"Setting the END" ).
When the Time delay
function is...

Programme numberProgramme name17CANNELLONI18CONVENIENCE CAKE19CONVENIENCE PIZZA20CONVENIENCE POTATO TYPES8.2 Recipes onlineYou can find the recipes for
the automatic programmes
specified for this appliance
on our website. To find the
proper Recipe Book check
the PNC number on the
rating plate on the front
frame of the appliance
cavity.8.3  Automatic programmes
1.Activate the appliance.
2. Touch 
.
The display shows 
, a symbol and the
number of the automatic programme.
3. Touch 
 or  to choose the...

When the set time ends, an acousticsignal sounds for two minutes. 
flashes. The appliance deactivates.
6. Touch a sensor field or open the
door to stop the acoustic signal.9.  USING THE ACCESSORIESWARNING!
Refer to Safety chapters.9.1  Core temperature sensor
There are two temperatures to be set:
the oven temperature and the coretemperature.
The core temperature sensor measures
the core temperature of the meat. When the meat is at the set temperature, theappliance deactivates.
CAUTION!
Only use the core...

When you cook with the
core temperature sensor,
you can change the
temperature shown in the
display. After you put the
core temperature sensor in
the socket and set an oven
function and temperature,
the display shows the
current core temperature.
Touch 
 again and again to
see three other
temperatures: • the set coretemperature
• the current oven temperature
• the current core temperature.
When the meat is at the set core
temperature, an acoustic signal sounds
for two minutes and the value of the core...

9.3 Trivet and Grill- / Roasting
panWARNING!
Be careful when you remove
the accessories from a hot
appliance. There is a risk of
burns.
You can use the trivet to roast larger pieces of meat or poultry on one shelf
position.
1. Put the trivet into the deep pan so
that the supports of the wire shelf
point up.
2. Put the deep pan into the oven on
the necessary shelf position.
You can use the trivet to grill flat dishes
in large quantities and to toast.
1. Put the trivet into the deep pan so
that the...

10.3 Using the Function Lock
You can activate the function only when the appliance operates.
The Function Lock prevents an
accidental change of the oven function.
1. To activate the function activate the
appliance.
2. Activate an oven function or setting.
3. Touch and hold 
 and  at the
same time for 2 seconds.
An acoustic signal sounds.
Loc comes on in the display.
To deactivate the Function Lock repeat
step 3.
If the Pyrolysis function
operates, the door is locked.
A message comes on in the
display...

After the Automatic switch-off, touch asensor field to operate the appliance
again.The Automatic switch-off
does not work with the
functions: core temperature
sensor, Light, Slow Cooking,
Duration, End, Time delay.10.6  Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness: – when the appliance is activated.
– if you touch a sensor field during
the night...