AEG Oven BP730402KM User Manual

							6.2 Oven functionsOven functionApplicationTrue Fan Cook-
ingTo bake on up to 3 shelf positions at the same time and
to dry food. Set the temperature 20 - 40 °C lower than
for Conventional Cooking.Pizza SettingTo bake food on 1 shelf position for a more intensive
browning and a crispy bottom. Set the temperature 20
- 40 °C lower than for Conventional Cooking.Slow CookingTo prepare tender, succulent roasts.Conventional
CookingTo bake and roast food on 1 shelf position.Frozen FoodsTo make your convenience food like e.g. French Fries,
Wedges, spring rolls crispy.Turbo GrillingTo roast larger meat joints or poultry with bones on 1
shelf position. Also to make gratins and to brown.Fast GrillingTo grill flat food in large quantities and to toast bread.GrillingTo grill flat food and to toast bread.Moist Fan BakingTo save energy when you bake and cook dry baked
goods. Also to bake baked goods in tins on 1 shelf po-
sition. This function was used to define the energy effi-
ciency class acc. EN50304.Keep WarmTo keep food warm.DefrostTo defrost frozen food.Bottom HeatTo bake cakes with crispy bottom and to preserve food.ECO RoastingThe ECO functions let you optimize the energy con-
sumption during cooking. It is necessary to set the
cooking time first. To get more information about the
recommended settings, refer to the cooking tables with
the equivalent function.PyrolysisTo activate the automatic pyrolytic cleaning of the
oven. This function burns off residual dirt in the oven.ENGLISH11               
						

							6.3 Setting the oven function
1. Activate the appliance with 
 or .
The display shows the set temperature,
the symbol and the number of the oven function.
2. Touch 
 or  to set an oven
function.
3. Touch 
 or the appliance starts
automatically after five seconds.
If you activate the appliance
and do not set an oven
function or programme, the
appliance deactivates
automatically after 20
seconds.6.4  Changing the temperature
Touch  or  to change the
temperature in steps of 5 °C.
When the appliance is at the set
temperature, an acoustic signal sounds
three times and the Heat up indicator goes out.
6.5  Checking the temperature
You can see the temperature in the
appliance when the function or
programme operates.
1. Touch .
The Temperature / Time display shows the temperature in the appliance.
2. Touch 
 to go back to the set
temperature or the display shows it automatically after five seconds.
6.6  Fast heat up functionDo not put food in the oven
when the Fast heat up
function operates.
The Fast heat up function is not available with every oven function. An acoustic
signal sounds if the Fast heat up function
is not available for the set function if
Faulty tone is activated in the "Settings
menu".
The Fast heat up function decreases the
heat up time.
To activate the Fast heat up function
touch and hold 
 for more than three
seconds.
If you activate the Fast heat up function,
the bars on the display 
 flash one by
one and 
 comes on to show that
the function operates.
7.  CLOCK FUNCTIONS7.1  Clock functions tableClock functionApplicationCOUNT UP TIMERTo set the count up, which shows how long the appli-
ance operates. This function has no effect on the opera-
tion of the appliance.TIME OF DAYTo show the time of day. To change the time of day, re-
fer to "Setting the time".DURATIONTo set how long the appliance operates.ENDTo set when the appliance deactivates. You can use Du-
ration and End at the same time (Time delay) if you want
the appliance to activate and deactivate automatically
later.SET+GOTo start the appliance with necessary settings with only
one touch of the sensor field any time later.www.aeg.com12                    
						

							7.2 Count Up TimerThe Count Up Timer is not
activated if Duration and
End are set.
The Count Up Timer starts to count when
the appliance starts to heat.
1. To reset the Count Up Timer, touch
 again and again until  flashes in
the display.
2. Touch 
 until the display shows
"00:00" and the Count Up Timer
starts to count up again.
7.3  Setting the DURATION
1.Activate the appliance and set an
oven function and temperature.
2. Touch 
 again and again until the
display shows 
.
 flashes in the display.
3. Use 
 or  to set the minutes for
DURATION.
4. Touch 
 to confirm.
5. Use 
 or  to set the hours for
DURATION. 
If you touch  or while you set the
DURATION, the
appliance switches to
the setting of the END
function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
 and time setting flash in the display.
The appliance deactivates.
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8. Deactivate the appliance.
7.4  Setting the END
1.Activate the appliance and set an
oven function and temperature.
2. Touch 
 again and again until the
display shows 
.
 flashes in the display.
3. Use  or  to set the END and
 or  to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for two minutes. 
 symbol
and the time setting flash in the display. The appliance deactivates.
4. Touch a sensor field or open the
oven door to stop the acoustic
signal.
5. Deactivate the appliance.
7.5  Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a
programme) and temperature (refer
to "Setting the oven function" and
"Changing the temperature").
2. Set the DURATION (refer to "Setting
the DURATION").
3. Touch 
 again and again until flashes in the display.
4. Touch 
 to set the SET+GO
function.
The display shows 
 and  with an
indicator. This indicator shows which
clock function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
7.6  Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a
countdown (maximum 23 h 59 min). This function has no effect on the operation
of the oven. You can set the MINUTE MINDER at any time and also when the
appliance is off.
1. Touch 
.
 and "00" flash in the display.
2. Use 
 or  to set the MINUTE
MINDER. First you set the seconds, then the minutes and the hours.
3. Touch 
 and  at the same time
to reset the set time.
4. Touch 
 or the MINUTE MINDER
starts automatically after five
seconds.
ENGLISH13                                     
						

							When the set time ends, an acousticsignal sounds for two minutes and 00:00
and 
 flash in the display.
5. Touch a sensor field or open the
oven door to stop the acoustic
signal.
7.7  Setting the Time delay
function
The DURATION  and END  can be
used at the same time, if the appliance is
to be switched on and off automatically
later. In this case, first set the DURATION
 and then the END  function (refer
to "Setting the DURATION" and
"Setting the END" ).
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
 with a dot and . The
dot shows which clock
function is on in the Clock /
residual heat display.
8.  AUTOMATIC PROGRAMMESWARNING!
Refer to Safety chapters.
There are 20 automatic programmes.
Use an automatic programme or recipe
when you do not have the knowledge or experience on how to prepare a dish.The display shows the shelf position and
the default cooking times for all
automatic programmes.8.1  Automatic programmesProgramme numberProgramme name1BRAISED MEAT2ROAST PORK3ROAST VEAL4ROAST LAMB5ROAST GAME6CHICKEN, WHOLE7WHOLE FISH8PIZZA9QUICHE LORRAINE10LEMON SPONGE CAKE11CHEESE CAKE12ROLLS13FARMER BREAD14DOUGH PROVING15POTATO GRATIN16LASAGNEwww.aeg.com14          
						

							Programme numberProgramme name17CANNELLONI18CONVENIENCE CAKE19CONVENIENCE PIZZA20CONVENIENCE POTATO TYPES8.2 Recipes onlineYou can find the recipes for
the automatic programmes
specified for this appliance
on our website. To find the
proper Recipe Book check
the PNC number on the
rating plate on the front
frame of the appliance
cavity.8.3  Automatic programmes
1.Activate the appliance.
2. Touch 
.
The display shows 
, a symbol and the
number of the automatic programme.
3. Touch 
 or  to choose the
automatic programme.
4. Touch 
 or wait five seconds until
the appliance automatically starts to
work.
5. When the set time ends, an acoustic
signal sounds for two minutes. The
symbol 
 flashes.
The appliance deactivates.
6. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8.4  Automatic programmes
with weight input
If you set the weight of the meat, the
appliance calculates the roasting time.
1. Activate the appliance.
2. Touch 
.
3. Touch 
 or  to set the weight
programme.
The display shows: the cooking time, the
duration symbol 
, a default weight, a
unit of measurement (kg, g).
4. Touch 
 or the settings save
automatically after five seconds.
The appliance activates.
5. You can change the default weight
value with 
 or . Touch .
6. When the set time ends, an acoustic
signal sounds for two minutes. 
flashes.
The appliance deactivates.
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8.5  Automatic programmes
with the core temperature
sensor
The core temperature of the food is
default and fixed in programmes with the
core temperature sensor. The
programme ends when the appliance is
at the set core temperature.
1. Activate the appliance.
2. Touch 
 again and again until the
display shows 
.
3. Install the core temperature sensor.
Refer to "Core temperature sensor".
4. Touch 
 or  to set the
programme for the core temperature
sensor.
The display shows the cooking time, 
and .
5. Touch 
 or the settings save
automatically after five seconds.
ENGLISH15                        
						

							When the set time ends, an acousticsignal sounds for two minutes. 
flashes. The appliance deactivates.
6. Touch a sensor field or open the
door to stop the acoustic signal.9.  USING THE ACCESSORIESWARNING!
Refer to Safety chapters.9.1  Core temperature sensor
There are two temperatures to be set:
the oven temperature and the coretemperature.
The core temperature sensor measures
the core temperature of the meat. When the meat is at the set temperature, theappliance deactivates.
CAUTION!
Only use the core
temperature sensor supplied or the correct replacement
parts.The core temperature sensor
must stay in the meat and in
the socket during the
cooking.
1. Activate the appliance.
2. Put the point of the core temperature
sensor (with 
 on the handle) into
the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows  flashing and the
default set core temperature. The
temperature is 60 °C for the first
operation, and the last set value for each subsequent operation.When you put the core
temperature sensor into the
socket, you cancel the
settings for the clock
functions.
4. Touch  or  to set the core
temperature.
5. Touch 
 or the settings save
automatically after 5 seconds. 
You can set the core
temperature only when
 flashes. If  is in the
display but does not
flash before you set the
core temperature, touch
 and  or  to set
a new value.
6. Set the oven function and the oven
temperature.
The display shows the current core
temperature and the heat up symbol 
.
While the appliance calculates the
approximate duration time, the display shows the count up time. After the firstcalculation the display shows the
approximate duration of the cooking
time.
The appliance continues to calculate the
duration during the cooking. The display
updates at intervals with the new
duration value.
www.aeg.com16                   
						

							When you cook with the
core temperature sensor,
you can change the
temperature shown in the
display. After you put the
core temperature sensor in
the socket and set an oven
function and temperature,
the display shows the
current core temperature.
Touch 
 again and again to
see three other
temperatures: • the set coretemperature
• the current oven temperature
• the current core temperature.
When the meat is at the set core
temperature, an acoustic signal sounds
for two minutes and the value of the core
temperature and 
 flash. The appliance
deactivates.
7. Touch a sensor field to deactivate
the acoustic signal.
8. Remove the core temperature sensor
from the socket and remove the
meat from the appliance.
WARNING!
Be careful when you remove
the core temperature
sensor. It is hot. There is a
risk of burns.9.2  Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide bars of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide bars of the shelf support and the wireshelf on the guide bars above.
• All accessories have small
indentations at the top of
the right and left side to
increase safety. The
indentations are also anti-
tip devices.
• The high rim around the shelf is a device which
prevents cookware from
slipping.
ENGLISH17         
						

							9.3 Trivet and Grill- / Roasting
panWARNING!
Be careful when you remove
the accessories from a hot
appliance. There is a risk of
burns.
You can use the trivet to roast larger pieces of meat or poultry on one shelf
position.
1. Put the trivet into the deep pan so
that the supports of the wire shelf
point up.
2. Put the deep pan into the oven on
the necessary shelf position.
You can use the trivet to grill flat dishes
in large quantities and to toast.
1. Put the trivet into the deep pan so
that the supports of the wire shelf
point down.
2. Put the deep pan into the oven on
the necessary shelf position.
10.  ADDITIONAL FUNCTIONS10.1  Using My Favourite
Programme function
Use this function to save your favourite temperature and time settings for an
oven function or programme.
1. Set the temperature and time for an
oven function or programme.
2. Touch and hold 
 for more than
three seconds. An acoustic signal sounds.
3. Deactivate the appliance.
• To activate the function  touch 
.
The appliance activates your favourite programme.
When the function
operates, you can change
the time and
temperature.
• To deactivate the function  touch .
The appliance deactivates your
favourite programme.
10.2  Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.If the Pyrolysis function
operates, the door is locked.
A message comes on in the
display when you touch a
sensor field.
1. To activate the function deactivate
the appliance with 
. Do not set an
oven function.
2. Touch and hold 
 and  at the
same time for 2 seconds.
An acoustic signal sounds.
SAFE comes on in the display. The door
is locked.
To deactivate the Child Lock function
repeat step 2.
www.aeg.com18            
						

							10.3 Using the Function Lock
You can activate the function only when the appliance operates.
The Function Lock prevents an
accidental change of the oven function.
1. To activate the function activate the
appliance.
2. Activate an oven function or setting.
3. Touch and hold 
 and  at the
same time for 2 seconds.
An acoustic signal sounds.
Loc comes on in the display.
To deactivate the Function Lock repeat
step 3.
If the Pyrolysis function
operates, the door is locked.
A message comes on in the
display when you touch a
sensor field.You can deactivate the
appliance when the Function
Lock is on. When you
deactivate the appliance,
the Function Lock
deactivates.10.4  Using the settings menu
You can set the settings menu only when
the appliance is deactivated.
The settings menu lets you activate or
deactivate functions in the main menu.
The display shows SET and the number
of the setting.
DescriptionValue to set1SET+GOON / OFF2RESIDUAL HEAT INDICATORON / OFF3CLEANING REMINDERON / OFF4KEY TONE1)CLICK / BEEP / OFF5FAULTY TONEON / OFF6SERVICE MENU-7RESTORE SETTINGSYES / NO1)  It is not possible to deactivate the tone of the ON / OFF sensor field.1. When the appliance is deactivated,
touch and hold 
 for three seconds.
The display shows SET1 and "1" flashes.
2. Touch 
 or  to set the setting.
3. Touch 
.
4. Touch 
 or  to change the value
of the setting.
5. Touch 
.
To exit the Settings menu, touch 
 or
touch and hold 
.
10.5  Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time if an oven function operates and
you do not change any settings.Temperature (°C)Switch-off time (h)30 - 11512.5120 - 1958.5200 - 2455.5250 - maximum1.5ENGLISH19              
						

							After the Automatic switch-off, touch asensor field to operate the appliance
again.The Automatic switch-off
does not work with the
functions: core temperature
sensor, Light, Slow Cooking,
Duration, End, Time delay.10.6  Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness: – when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart fromON / OFF), the display goes backto the day brightness mode forthe next 10 seconds.
– if the appliance is deactivated and you set the Minute Minder. When
the Minute Minder function ends, the display goes back to the night
brightness.10.7  Cooling fan
When the appliance operates, the
cooling fan activates automatically to
keep the surfaces of the appliance cool. If you deactivate the appliance, thecooling fan can continue to operate untilthe appliance cools down.
11.  HINTS AND TIPSWARNING!
Refer to Safety chapters.The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.11.1  Inner side of the door
In some models, on the inner side of
the door you can find:
• the numbers of the shelf positions.
• information about the oven functions, recommended shelf positions andtemperatures for typical dishes.
11.2  Baking
• Your oven can bake or roast
differently to the appliance you had
before. Adapt your usual settings
(temperature, cooking times) and
shelf positions to the values in the
tables.
• The manufacturer recommends that you use the lower temperature the
first time.
• If you cannot find the settings for a special recipe, look for the one that is
almost the same.
• You can extend baking times by 10 – 15 minutes if you bake cakes on more
than one shelf position.
• Cakes and pastries at different heights do not always brown equallyat first. If this occurs, do not change
the temperature setting. The
differences equalize during the
baking procedure.
• With longer baking times, you can deactivate the oven approximately 10
minutes before the end of the baking time and then use the residual heat.
When you cook frozen food, the trays in the oven can twist during baking. Whenthe trays become cold again, the
distortions are gone.www.aeg.com20