AEG Oven BP730402KM User Manual

							ENUser ManualOvenBP730402K
BP730410K    
						

							CONTENTS
1. SAFETY INFORMATION.................................................................................................3
2.  SAFETY INSTRUCTIONS................................................................................................ 4
3.  PRODUCT DESCRIPTION.............................................................................................. 7
4.  CONTROL PANEL........................................................................................................... 8
5.  BEFORE FIRST USE....................................................................................................... 10
6.  DAILY USE......................................................................................................................10
7.  CLOCK FUNCTIONS.................................................................................................... 12
8.  AUTOMATIC PROGRAMMES...................................................................................... 14
9.  USING THE ACCESSORIES.......................................................................................... 16
10.  ADDITIONAL FUNCTIONS........................................................................................ 18
11.  HINTS AND TIPS......................................................................................................... 20
12.  CARE AND CLEANING.............................................................................................. 34
13.  TROUBLESHOOTING.................................................................................................37
14.  ENERGY EFFICIENCY.................................................................................................39
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes
reading to get the very best from it. Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfserviceRegister your product for better service:
www.registeraeg.comBuy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shopCUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
 Warning / Caution-Safety information
 General information and tips
 Environmental information
Subject to change without notice.
www.aeg.com2       
						

							1.  SAFETY INFORMATION
Before the installation and use of the appliance,carefully read the supplied instructions. The manufacturer is not responsible if an incorrect
installation and use causes injuries and damages. Always keep the instructions with the appliance for future
reference.
1.1  Children and vulnerable people safety
•This appliance can be used by children aged from 8
years and above and persons with reduced physical,sensory or mental capabilities or lack of experienceand knowledge if they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
• If the appliance has a child safety device, we
recommend you activate it.
• Cleaning and user maintenance shall not be made by
children without supervision.
• Children of less than 3 years should be kept away
unless continuously supervised.
1.2  General Safety
•
Only a qualified person must install this appliance and
replace the cable.
• Internally the appliance becomes hot when in
operation. Do not touch the heating elements that are in the appliance. Always use oven gloves to remove or
put in accessories or ovenware.
• Before maintenance cut the power supply.
ENGLISH3  
						

							•Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch the surface, which may result in shattering of the glass.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
• Excess spillage must be removed before the pyrolytic
cleaning. Remove all parts from the oven.
• To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the side walls. Install the shelf supports in the oppositesequence.
• The means for disconnection must be incorporated in
the fixed wiring in accordance with the wiring rules.
• Only use the core temperature sensor recommended
for this appliance.2.  SAFETY INSTRUCTIONS2.1  InstallationWARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Always be careful when you move the appliance because it is heavy. Alwayswear safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the other appliances and units.
• Make sure that the appliance is installed below and adjacent safestructures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.2.2  Electrical connectionWARNING!
Risk of fire and electrical
shock.
• All electrical connections should be made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agrees
with the power supply. If not, contact
an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains
www.aeg.com4   
						

							cable. Should the mains cable need
to be replaced, this must be carried out by our Authorised Service Centre.
• Do not let mains cables touch or come near the appliance door,
especially when the door is hot.
• The shock protection of live and insulated parts must be fastened in
such a way that it cannot be removed without tools.
• Connect the mains plug to the mains socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an isolation device which lets you
disconnect the appliance from the mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
• This appliance complies with the E.E.C. Directives.2.3  UseWARNING!
Risk of injury, burns and
electrical shock or explosion.
• Use this appliance in a household only.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are not blocked.
• Do not let the appliance stay unattended during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance door while the appliance is
in operation. Hot air can release.
• Do not operate the appliance with wet hands or when it has contact with
water.
• Do not apply pressure on the open door.
• Do not use the appliance as a work surface or as a storage surface.
• Open the appliance door carefully. The use of ingredients with alcohol
can cause a mixture of alcohol and air.
• Do not let sparks or open flames to come in contact with the appliance
when you open the door.
• Do not put flammable products or items that are wet with flammableproducts in, near or on the appliance.WARNING!
Risk of damage to the
appliance.
• To prevent damage or discoloration to the enamel:– do not put ovenware or other objects in the appliance directly
on the bottom.
– do not put aluminium foil directly on the bottom of the appliance.
– do not put water directly into the hot appliance.
– do not keep moist dishes and food in the appliance after you
finish the cooking.
– be careful when you remove or install the accessories.
• Discoloration of the enamel has no effect on the performance of the
appliance. It is not a defect in the
sense of the warranty law.
• Use a deep pan for moist cakes. Fruit juices cause stains that can be
permanent.
• This appliance is for cooking purposes only. It must not be used for
other purposes, for example room heating.
• Always cook with the oven door closed.
• If the appliance is installed behind a furniture panel (e.g. a door) make surethe door is never closed when the
appliance is in operation. Heat and moisture can build up behind a
closed furniture panel and cause
subsequent damage to the appliance,
the housing unit or the floor. Do not
close the furniture panel until the
appliance has cooled down
completely after use.
ENGLISH5   
						

							2.4 Care and cleaningWARNING!
Risk of injury, fire, or damage
to the appliance.
• Before maintenance, deactivate the
appliance and disconnect the mainsplug from the mains socket.
• Make sure the appliance is cold. There is the risk that the glass panelscan break.
• Replace immediately the door glass panels when they are damaged.
Contact the Authorised Service
Centre.
• Be careful when you remove the door from the appliance. The door is
heavy!
• Clean regularly the appliance to prevent the deterioration of the
surface material.
• Remaining fat or food in the appliance can cause fire.
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
• If you use an oven spray, obey the safety instructions on the packaging.
• Do not clean the catalytic enamel (if applicable) with any kind of
detergent.
2.5  Pyrolytic cleaningRisk of Injury / Fires /
Chemical Emissions (Fumes)
in Pyrolitic Mode.
• Before carrying out a Pyrolitic self- cleaning function or the First Use
please remove from the oven cavity: – any excess food residues, oil or grease spills / deposits.
– any removable objects (including shelves, side rails etc., providedwith the product) particularly anynon-stick pots, pans, trays,
utensils etc.
• Read carefully all the instructions for Pyrolytic cleaning.
• Keep children away from the
appliance while the Pyrolytic cleaningis in operation.
The appliance becomes very hot and
hot air is released from the front
cooling vents.
• Pyrolytic cleaning is a high temperature operation that can
release fumes from cooking residues and construction materials, as such
consumers are strongly advised to: – provide good ventilation during and after each Pyrolytic cleaning.
– provide good ventilation during and after the first use at maximum
temperature operation.
• Unlike all humans, some birds and
reptiles can be extremely sensitive to
potential fumes emitted during the
cleaning process of all Pyrolytic Ovens. – Remove any pets (especially birds) from the vicinity of the appliance
location during and after the
Pyrolytic cleaning and first use
maximum temperature operation
to a well ventilated area.
• Small pets can also be highly sensitive to the localized temperature changesin the vicinity of all Pyrolytic Ovens
when the Pyrolytic self cleaning
program is in operation.
• Non-stick surfaces on pots, pans, trays, utensils etc., can be damagedby the high temperature Pyrolytic
cleaning operation of all Pyrolytic
Ovens and can be also a source for
low level harmful fumes.
• Fumes released from all Pyrolytic Ovens / Cooking Residues as
described are not harmful to humans,
including infants or persons with
medical conditions.2.6  Internal light
• The type of light bulb or halogen
lamp used for this appliance is only
for household appliances. Do not use
it for house lighting.
WARNING!
Risk of electrical shock.
• Before replacing the lamp, disconnect the appliance from the power supply.
• Only use lamps with the same specifications.
www.aeg.com6    
						

							2.7 DisposalWARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the
appliance.
2.8  Service
• To repair the appliance contact an Authorised Service Centre.
• Use original spare parts only.3.  PRODUCT DESCRIPTION3.1  General overview1Control panel2
Electronic programmer
3
Socket for the core temperature
sensor
4
Heating element
5
Lamp
6
Fan
7
Shelf support, removable
8
Shelf positions
3.2  Accessories
Nonstick wire shelf
For cookware, cake tins, roasts.
Baking tray
For cakes and biscuits.
Grill- / Roasting pan
To bake and roast or as a pan to collect fat.
ENGLISH7 2
7
1
8
4
3
5
6
5
4 3 2 1     
						

							Trivet
For roasting and grilling.
Use the trivet only with the
Grill- / Roasting pan.Core temperature sensor
To measure how far the food is cooked.
4.  CONTROL PANEL4.1  Electronic programmer
Use the sensor fields to operate the appliance.
Sensor
FieldFunctionDescription1-DISPLAYShows the current settings of the appliance.2ON / OFFTo activate and deactivate the appliance.3OPTIONSTo set an oven function or an automatic pro-
gramme.4MY FAVOURITE
PROGRAMMETo store your favourite programme. Use it to
have access to your favourite programme direct-
ly or when the appliance is deactivated.5TEMPERATURE /
FAST HEAT UPTo set and see the cavity temperature or the
core temperature sensor temperature (if
present). If you press and hold it for three sec-
onds, it turns the Fast heat up function ON or
OFF. Straight access to the temperature setting
of the first oven function when the appliance is
off.www.aeg.com8   12345678910      
						

							Sensor
FieldFunctionDescription6UP, DOWNTo move up or down in the menu.7OKTo confirm a selection or setting.8OVEN LIGHTTo activate or deactivate the lamp.9CLOCKTo set the clock functions.10MINUTE MINDERTo set the Minute Minder.4.2  DisplayA. Oven function symbol
B. Temperature / time of day display
C. Clock / Residual heat display / Minute Minder
D. Residual heat indicator
E. Indicators for the clock functions
F. Heat-up indicator / Fast Heat Up indicator
G. Number of an oven function / programme
Other indicators of the display:
SymbolNameDescriptionFunctionsYou can choose an oven function.Automatic programmeYou can choose an automatic pro-
gramme.My favourite programmeThe favourite programme operates. / kg / gAn automatic programme with a weight
input operates. / h / minA clock function operates.Temperature / Fast heat upThe function operates.TemperatureThe current temperature is indicated.ENGLISH9      A B CD
E
F
G           
						

							SymbolNameDescriptionTemperatureYou can change the temperature.Core temperature sensorThe core temperature sensor is in the
core temperature sensor socket.Door lockThe door lock function operates. LightYou deactivated the light.Minute minderThe minute minder function operates.4.3  Heat up indicator
If you activate an oven function, the bars
 come on in the display. The bars
show that the temperature in the
appliance increases or decreases.
When the appliance is at the set
temperature, the bars go off the display.5.  BEFORE FIRST USEWARNING!
Refer to Safety chapters.5.1  Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and
cleaning" chapter.
Clean the appliance before first use.
Put the accessories and the removable shelf supports back to their initial
position.
5.2  Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few
seconds the display shows the software
version.
After the software version goes off, the
display shows h and 12:00. "12" flashes.
1. Touch 
 or  to set the hours.
2. Touch 
 or .
3. Touch 
 or  to set the minutes.
4. Touch 
 or .
The Temperature / Time display shows the new time.
5.3  Changing the time
You can change the time of day only
when the appliance is off.
Touch 
.
 flashes in the display.
To set the new time of day, refer to "Setting the time".
6.  DAILY USEWARNING!
Refer to Safety chapters.6.1  Operating the appliance
To operate the appliance you can use: • the manual mode
• automatic programmeswww.aeg.com10