AEG Freestanding washer dryer L99695HWD User Manual

							ENUser ManualWasher DryerL 99695 HWD    
						

							CONTENTS
1. SAFETY INFORMATION.................................................................................................3
2.  SAFETY INSTRUCTIONS................................................................................................ 5
3.  PRODUCT DESCRIPTION.............................................................................................. 7
4.  CONTROL PANEL........................................................................................................... 8
5.  PROGRAMMES ............................................................................................................ 12
6.  CONSUMPTION VALUES............................................................................................. 16
7.  SETTINGS...................................................................................................................... 17
8.  OPTIONS....................................................................................................................... 17
9.  BEFORE FIRST USE....................................................................................................... 19
10.  DAILY USE - WASHING ONLY...................................................................................20
11.  END OF THE PROGRAMME......................................................................................23
12.  DAILY USE - DRYING ONLY...................................................................................... 23
13.  DAILY USE - WASHING & DRYING........................................................................... 24
14.  HINTS AND TIPS......................................................................................................... 26
15.  CARE AND CLEANING.............................................................................................. 27
16.  TROUBLESHOOTING.................................................................................................33
17.  INSTALLATION........................................................................................................... 37
18.  TECHNICAL DATA..................................................................................................... 43
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler
features you might not find on ordinary appliances. Please spend a few minutes
reading to get the very best from it. Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.comRegister your product for better service:
www.registeraeg.comBuy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shopCUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
 Warning / Caution-Safety information
 General information and tips
 Environmental information
Subject to change without notice.
www.aeg.com2       
						

							1.  SAFETY INFORMATION
Before the installation and use of the appliance,carefully read the supplied instructions. The manufacturer is not responsible if an incorrect
installation and use causes injuries and damages. Always keep the instructions with the appliance for future
reference.
1.1  Children and vulnerable people safetyWARNING!
Risk of suffocation, injury or permanent
disability.
• This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
• Do not let children play with the appliance.
• Children of less than 3 years should be kept away
unless continuously supervised.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the appliance door
when it is open.
• If the appliance has a child safety device, we
recommend you activate it.
• Cleaning and user maintenance shall not be made by
children without supervision.
1.2  General Safety
•
Do not change the specification of this appliance.
• The appliance can be installed as freestanding or
below the kitchen counter with correct space.
• Do not install the appliance behind a lockable door, a
sliding door or a door with a hinge on the opposite
ENGLISH3   
						

							side, where the appliance door can not be fully
opened.
• Connect the mains plug to the mains socket only at
the end of the installation. Make sure that there is access to the mains plug after the installation.
• The ventilation openings in the base (if applicable)
must not be obstructed by a carpet.
• Ensure you have good ventilation in the installation
room to avoid the back flow of gases into the room
from appliances burning other fuels, including open
fires.
• Exhaust air must not be discharged into a flue which is
used for exhausting fumes from appliances burning
gas or other fuels (if applicable).
• The operating water pressure (minimum and
maximum) must be between 0,5 bar (0,05 MPa) and 8
bar (0,8 MPa).
• Obey the maximum load volume of 9 kg (refer to the
“Programme chart” chapter).
• The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must not be reused.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre orsimilarly qualified persons in order to avoid a hazard.
• Wipe away lint that has accumulated around the
appliance.
• Do not run the appliance without filters. Clean the lint
filter before or after each use.
• Items that have been soiled with substances such as
cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of
detergent before being dried in the wash dryer.
• Do not use the appliance if industrial chemicals have
been used for cleaning.
• Do not dry unwashed items in the wash dryer.www.aeg.com4 
						

							•Items such as foam rubber (latex foam), shower caps,
waterproof textiles, rubber backed articles and clothesor pillows fitted with foam rubber pads should not be dried in the wash dryer.
• Fabric softeners, or similar products, should be used
as specified by the fabric softener instructions.
• Remove all objects from pockets such as lighters and
matches.
• Never stop the wash dryer before the end of the
drying cycle unless all items are quickly removed and
spread out so that the heat is dissipated.
• The final part of a wash dryer cycle occurs without
heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will notbe damaged.
• Do not use water spray and steam to clean the
appliance.
• Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
• Before maintenance, deactivate the appliance and
disconnect the mains plug from the mains socket.2.  SAFETY INSTRUCTIONS2.1  Installation
• Remove all the packaging and the transit bolts.
• Keep the transit bolts. When you move the appliance again you must
block the drum.
• Always be careful when you move the appliance because it is heavy. Alwayswear safety gloves.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Do not install or use the appliance where the temperature is less than
5°C or higher than 35 °C.
• Make sure that the floor where you install the appliance is flat, stable,heat resistant and clean.• Do not install the appliance where the
appliance door can not be fullyopened.
• Always move the appliance vertically.
• The rear surface of the appliance must be put against the wall.
• Make sure that there is air circulation between the appliance and the floor.
• Adjust the feet to have the necessary space between the appliance and the
carpet.
• When the appliance is put in its permanent position, check if it is fully
level with the aid of a spirit level. If it
is not, adjust the feet until it is.
• To make sure the compressor works properly, wait 6 hours after the
installation before using the
appliance.ENGLISH5 
						

							2.2 Electrical ConnectionWARNING!
Risk of fire and electrical
shock.
• The appliance must be earthed.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Do not pull the mains cable to disconnect the appliance. Always pull
the mains plug.
• Do not touch the mains cable or the mains plug with wet hands.
• Only for UK and Ireland: The appliance has a 13 amp mains plug. If
it is necessary to change the fuse in the mains plug, use a 13 amp ASTA(BS 1362) fuse.
• This appliance complies with the E.E.C. Directives.
2.3  Water Connection
• Make sure not to cause damage to
the water hoses.
• Before you connect the appliance to new pipes or pipes not used for a
long time, let the water flow until it is
clean.
• The first time you use the appliance, make sure that there is no leakage.
2.4  UseWARNING!
Risk of injury, electrical
shock, fire, burns or damage
to the appliance.
• Use this appliance in a household only.
• Do not change the specification of this appliance.
• Do not put flammable products or items that are wet with flammableproducts in, near or on the appliance.
• Do not touch the glass of the door
while a programme operates. The
glass can be hot.
• Do not dry the damaged items which contain padding or fillings.
• If you have washed your laundry with a stain remover start an extra rinsecycle before you start a drying cycle.
• Make sure that you remove all metal objects from the laundry.
• Only dry fabrics which are applicable to dry in the washer-dryer. Follow the
instructions on the fabric label.
• Plastic items are not heat resistant.
– If you use a detergent ball,remove it before you set the
drying programme.
– Do not use a detergent ball when you set a non-stop programme.WARNING!
Risk of injury or damage to
the appliance.
• Do not sit or stand on the open door. • Do not dry dripping wet clothes in the appliance.
2.5  Disposal
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the
appliance.
2.6  CompressorWARNING!
Risk of damage to the
appliance.
• The compressor and its system in the washer-dryer is filled with the special
agent which is free from fluoro-
chlorohydrocarbons. This system must
stay tight. The damage of the system
can cause a leakage.
www.aeg.com6     
						

							3. PRODUCT DESCRIPTION3.1  Appliance overview1Worktop2
Detergent dispenser
3
Air filter(s)
4
Control panel
5
Door handle
6
Rating plate
7
Drain pump filter
8
Feet for the appliance level
9Airflow slots10
Water drain hose
11
Water inlet valve
12
Mains cable
13
Transit bolts
14
Feet for the appliance level
3.2 How to activate the child
safety device
This device prevents children or pets to
be closed in the drum.
Turn the device clockwise, until the
groove is horizontal.
You cannot close the door.To close the door, turn the device
anticlockwise until the groove is vertical.ENGLISH7123411
6
7
89
5
12
13
14
10   
						

							3.3 Accessories1Spanner
To remove the transit bolts.2
Plastic caps
To close the holes on the rear side of the
cabinet after the removal of the transit
bolts.
3
Anti-flood inlet hose
To prevent possible leakage
4
Plastic hose guide
To connect the drain hose on the edge of
a sink.
4.  CONTROL PANEL4.1  Control panel description1On/Off button (On/Off)2
Programme knob
3
Display
4
Automatic drying level touch button
(Auto Dry)
5
Drying time touch button (Time Dry)
6
Steam touch button (Steam)
7
Start Pause touch button (Start/ Pause)
8Delay start touch button (Delay Start)9
Time save touch button (Time Save)
10
Extra rinse touch button (Extra Rinse)
11
Option touch button (Stains/Prewash)
12
Spin reduction touch button (Spin)
13
Temperature touch button (Temp.°C)
www.aeg.com812
34 Temp.SpinStains/
Prewash Extra
Rinse Time
Save Delay
Start Start/PauseTime Dry
Auto Dry
Steam
Wool/ Silk 
Wool
Cottons 
Synthetics 
Synthetics
Easy Iron
Delicates
Anti-Allergy
Spin/Drain Rinse
20Min. - 3kg Super Eco
Refresh
Anticrease
Cottons Eco 
Cottons
W A S H / D R YS P E C I A L 
S T E A M
D R Y
On/Off
1234
5
6
78910111213  
						

							4.2 DisplayThe display shows:
A
The text bar:
• Guides you in the use of the appliance.
• Shows the programme status and phase.
• Shows alarm messages. Refer to 'Troubleshooting' .The symbols appear on the display when the related phase or function is set.BChild safety lock
C
Door lockedYou cannot open the appliance door when the symbol is on. You can
open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• The «Rinse hold» function is on.
• There is water in the drum.ENGLISH9A B C DE
F
G
H
I
JK    
						

							D
Digit areaTime of the day
When you activate the appliance the display shows the time of the day for some
seconds. To adjust the clock, refer to "Clock setting".Programme duration
When you set the programme, the cycle duration is displayed for a few seconds
then, the time of the programme end appears again.Programme duration indicator
The indicator comes on when the digits shows the programme dura-
tion.End time of the programmeProgramme end indicator
The indicator comes on when the digits shows the programme end
time.Time of delay
When you set the delayed start the time of the programme end increases by steps
of 30 minutes till 10 hours and by steps of one hour till 20 hours.End of the programme
The display shows a zero.
E
This part comes on only if the door is open - Refer to 'Activating the appliance and
setting a programme'.
Maximum allowed load of laundry for the set programme (in kg).
Graphic bars
To set a function:
The function indicator comes on when the related function is set.The empty indicator bar appears only if the related function is avail-
able for the set programme.
If an indicator bar does not come on, it means that it is not available.The indicator bar fills accordingly to the set functions.If you make a wrong selection, the text bar says that the selection is not possible.www.aeg.com10