AEG Dryiron DB6130U User Manual
Have a look at the manual AEG Dryiron DB6130U User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 513 AEG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![](/img/blank.gif)
21 d GR NL F GB Cleaning and care 3. Cleaning the soleplate. Do not use scouring pads or harsh cleaners on the soleplate as these will damage the surface. To remove burnt residue, iron over a damp cloth while iron is still hot. To clean the soleplate, simply wipe with soft damp cloth and wipe dr y. 2. Self-cleaning function. Fill the iron with water and heat up the iron. When the indicator light turns green, unplug the iron. Hold the iron over a sink, press and hold the cleaning button. Use a full tank of water. Release button to stop self-cleaning function. Repeat the procedure if necessary. NOTE! Do not use any descaling fluid or vinegar. 1. Always store iron on its heel rest. To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as these will damage the surface. Do not store the iron with water in the tank. Wind the mains cord around the cord storage facility.
![](/img/blank.gif)
22 GB Troubleshooting ProblemPossible cause SolutionSoleplate is not heating even though iron is turned on. Connection problem Check main power supply cable, plug and outlet. Temperature control is in MIN position. Select adequate temperature. Iron does not produce steam. Not enough water in tank. Fill water tank (see “Getting started”, no 2). Steam control is selected in non-steam position. Set steam control between positions of minimum steam and maximum steam (see “Ironing chart”). Selected temperature is lower than that specified to use with steam. Increase temperature to at least . Spray function does not work. Not enough water in tank. Fill water tank (see “Getting started”, no 2). Steam jet and vertical steam jet function does not work. Steam jet function was used very frequently within a short period. Put iron on horizontal position and wait before using steam jet function. Iron is not hot enough. Adjust the proper temperature to steam ironing (up to ). Put iron in vertical position and wait until temperature indicator light turns off.
![](/img/blank.gif)
23 d GR NL F GB GB Disposal Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
![](/img/blank.gif)
3485ADB61XX02011112 Printed on recycled paper www.aeg-home.com Electrolux Hausgerate Vertriebs GmbHFurther Strasse 246D-90429 Nurnberg Germany