ADT Security Services OC835ADT Wireless Outdoor HD Camera Installation Guide

							Chapter 4 Wall Mounting 
 
11. At the location of the powe r source, connect the power cable to the  pow er 
ada pte r: 
•   Scr ew  t h e r e d  wire  o n to  t h e po sitiv e  (+ ) te rm ina l o f t h e po wer adapter , on 
the left  side. 
•   Scr ew  t h e b la ck  wire on to t h e n eg ativ e  (– ) te rm in al o f t h e p ow er
 ada pte r, 
on the right  side . 
12.  Remove the  retaining screw from the receptacle plate and p lug the power 
adapter into  the lower  power outlet . 
13.  Insert  the retaining screw  through the opening at the top of the power 
adapter and reinstall it into the receptacle, securing the adapter  to the wall. 
 
Figur e 9: Routing the Power Cable  
14. Adjust the  camera to a desired  position and secure  it firmly. 
15. V erify that the camera is  active on the wireless network and is  recognized by 
Pulse .  
   
OC835-ADT  Outdoor  Day/Night  HD Camera Installation Guide 21  
  
						

							Chapter 4 Wall Mounting 
 
Mounting Suggestion: To get the best video quality for targets at night, 
make sure that the camera’s field of view does not  include a large 
foreground object, such as tabletop or side wall. If installing on a tabletop, 
place the camera as close to the edge as possible. If installing on a wall, 
angle the camera so that a minimal portion of the wall is visible . 
 
 
22   OC835- ADT Outdoor  HD Camera Installation Guide  
  
						

							Appendix A 
Specifications 
OC835-ADT Outdoor  Day/Night  HD Camera  
Dimensions  
W x H x D 2.99” x 2.99”  x 1.91” (76mm x  76mm x 48.6mm) 
Video Compression  H.264 and MJPEG 
Image Resolution 
16:9 720p (1280x720), 640x360  
4:3 XGA  ( 1024 x720 ), VGA (640x480) , QVGA (320x240)  
Mixed Mode (720p, VGA, QVGA)  
Operating 
Temperature 
–40°F to 122°F  ( 
						

							Appendix 
 
Regulatory Approvals 
 
FCC Statement 
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occu r in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one of the followi ng measures: 
•   Reorient or relocate the receiving antenna.  
•   Increase the separation between the equipment and receiver.  
•   Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected.  
•   Consult the dealer or an experien ced radio/TV technician for help. 
To assure continued compliance, any changes or modifications not expressly 
approved by the party responsible for compliance could void the user's authority 
to operate this equipment. (Example  - use only shielded interface  cables when 
connecting to computer or peripheral devices).  
FCC Radiation Exposure Statement 
This equipment complies with FCC RF radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated with 
a minimum distance of 20 centimeters between the radiator and your body.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions:   
(1) This device may not cause harmful interference, and  
(2) T his device must acce pt any interference received, including interference that 
may cause undesired operation.  
This transmitter must not be co -located or operating in conjunction with any other 
antenna or transmitter.  
24  OC835- ADT Outdoor  HD Camera Installation Guide