Home > Addonics Technologies > Encryption > Addonics Technologies Jupiter Cipher 1825 IDE Jupiter Cipher Ex Drive User Manual

Addonics Technologies Jupiter Cipher 1825 IDE Jupiter Cipher Ex Drive User Manual

Here you can view all the pages of manual Addonics Technologies Jupiter Cipher 1825 IDE Jupiter Cipher Ex Drive User Manual. The Addonics Technologies manuals for Encryption are available online for free. You can easily download all the documents as PDF.

Page 11

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 10
 
Step 6 
Put the top cover on by holding it in n ear 
vertical position and sliding the two 
metal clips inside th e two small slots on 
the rear of the bottom cove r. 
 
 
 
 
 
 
 
Step 7 
Lower the front of the top cover and 
makin g sure the two cov ers lined up 
properly. Tighten the small retaining 
screw on the front of the bottom cover 
to close the enclosure. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

Page 12

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 11
Chapter 6 Attaching USIB interface cable  
 
 
 
Be sure the Jupiter Cipher ExDr ive key is inserted in to the drive enclosure prior 
to turning on the power or attaching th e USIB interface cable to the co mputer. 
Hard drive will not be detected if the interface cable is attached to the computer 
without the Cipher key inserted first.  Under such condition, th e power to the 
drive enclosure will have to b e turned off and turned back...

Page 13

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 12
Chapter 7 
 
7.1 USB2.0 USIB Cable (Model: AAUSBC-309) 
 
Note:  USB Jupiter Cipher ExDrive is Plug and Play under Windows XP, 
2000 and 98Me. There is no third party driver needed. 
 
  
 
· Since USB 2.0 Hi-Speed is an evolution of the existing USB 1.1 
specification, it is fully forward and backward compatible w ith current 
USB systems.  
· If you do not have an USB2.0 port, you may  install an optional USB2.0 
adapter or controller...

Page 14

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 13
Driver Installation for Win98 and Win98SE 
1. Make sure your computer is up and runn ing. 
2. Insert the USB2.0 USIB  cable to the USB Port. 
3. A New Hardware Found message shall pop up, click Next. 
4. “What do you want Windows to do?” message opens. Select “Search for 
the best dri ver for your device,” click Next. 
5. “Specify Location” message opens. Poin t to the location of  C:\My 
Documents\mass_storage_601where yo u unzip the...

Page 15

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 14
7.2 SATA USIB Cable (Model: AASAC-605) 
 
 
 
                                
 
For Win98SE, Me, 2000 and XP 
 
Note: There are no drivers needed to use the Se rial ATA cable as long as the 
drivers are installed for the Serial ATA Controller card/chip. It is plug and 
play. 
 
 
Disk Management for Windows 98 
  
Note:  Refer to the SATARAID Management Utility Manual 
SATARAID Manual V1.30 (for non-RAID5 Controllers) found in the...

Page 16

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 15
7.3 FIREWIRE USIB Cable (Model: AAFWC-406) 
 
Note:  Firewire Jupiter Cipher ExDrive is Plug and Play under Windows XP, 
2000 and 98Me. There is no thir d party driver needed.  
                          
 
 
Driver Installation for Win98 and Win 98SE 
After plugging in the cable so me system might prompt you f or Win98SE CD, 
in case you don’t have the Win98SE CD and t he wizard prompts you for: 
 
NTMAP.SYS please type...

Page 17

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 16
 
For Windows 2000 & XP Operating Systems 
 
How to use Disk Management 
To start Disk Management:  
1. Log on as administrator or as a member of the Administrators group. 
2. Click Start, click Run, type compmgmt.msc, and then click OK. In the 
console tree, click Disk Management. The Disk Management window 
appears. Your disks and volumes appear in a gr aphical view and list view. 
3. To customize how you view your disks an d volumes...

Page 18

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 17
7. Confirm that the options that selecte d are correct, and then click Finish. 
 
The new partition or logical drive is created and appears in the appropriate 
basic disk in the Disk Managemen t window. If you chose to format the volume 
in step 6, th e format process now  starts. 
How to format a basic  volume 
To format a pa rtition, logical drive or basic volume: 
1. In the Disk Management window, right-click the partition or logical...

Page 19

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 18
Technical Support 
 
If you need assistan ce to get your unit functionin g properly, please call 
Addonics Technical Support.  Our techni cal staff will be happy to assist you, 
but they will need y our help to do so.  Calling t he technical support staff 
without all the proper information can be bo th time consuming and frustrating.  
Here are some tips to help you out: 
 
(1) MODEL NUMBER – Please have this number on hand. 
(2) SYSTEM...
Start reading Addonics Technologies Jupiter Cipher 1825 IDE Jupiter Cipher Ex Drive User Manual

Related Manuals for Addonics Technologies Jupiter Cipher 1825 IDE Jupiter Cipher Ex Drive User Manual

All Addonics Technologies manuals