Addonics Technologies Jupiter Cipher 1825 IDE Jupiter Cipher Ex Drive User Manual

 
 
 
 
 
 
 
Addonics 
TE C HNO LO G IE S 
 
 
 
Jupiter Cipher ExDrive 
 
      For the following models: 
      JCEDIU64, JCEDIF64, JCEDIS64 
      JCEDIU128, JCEDIF128, JCEDIS128 
      JCEDIU192, JCEDIF192, JCEDIS192 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
User’s Guide 
Version 1.0  

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 1
FCC Warning Statement 
 
This equipment has been tested and found to comply w ith the limi ts for a class 
B digital device pursuant to Part 15 of the FCC rules.  These limits are 
designed to provide  reasonable protection against har mful interference in a 
residential installation.  This equipment generates, uses and can radiate radio 
frequency energy.  If not installed and used in accordance with the in structions, 
it may cause...

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 2
Contents 
 
FCC Warning...................................................................................1 
Limited Warranty............................................................................1 
Contents............................................................................................2 
Chapter 1 General Information.........................................................3...

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 3
Chapter 1 
  
General Information 
 
The Addonics Technologies Jupiter Cipher ExDrive is a portable 2.5” Hard 
Disk Drive kit. The unit is external and uses the USB2.0, Firewire/iLink, and  
Serial ATA int erfaces. 
 
Features 
 
· Stylished and rugged black anodized aluminum housing  
· Compact size and light weight  
· Shock proof - up to 3 feet drop damage protection for the hard drive  
· Easy hard drive installation  
· Choice of s...

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 4
Jupiter Cipher ExDrive 
 
Item Number Product Description 
JCEDIU64 Jupiter Cipher ExDrive 64-bit for 2.5” IDE hdd, USB 2.0 
JCEDIF64 Jupiter Cipher ExDrive 64-bit for 2.5” IDE hdd, 
Firewire/iLink 
JCEDIS64 Jupiter Cipher ExDrive 64-bit for 2.5” IDE hdd, SATA 
JCEDIU128 Jupiter Cipher ExDrive 128-bit for 2.5” IDE hdd, USB 2.0 
JCEDIF128 Jupiter Cipher ExDri ve 128-bit for 2.5” IDE hdd, 
Firewire/iLink 
JCEDIS128 Jupiter Cipher ExDrive...

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 5
Chapter 2  Jupiter Cipher ExDrive key 
 
Check to make sure you have the correct version of Jupiter Cipher ExDr ive key. 
The key should match the la bel at the bottom of the drive enclosure. 
 
IMPORTANT  
 
There is no back door for the Jupiter Cipher ExDrive encrypted hard drive if 
the key is lost or stolen.  
 
To ensure that there is a spare key, yo ur Jupiter Cipher ExDrive bundled kit 
comes with one pair of Jupiter Cipher ExDrive...

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 6
Chapter 3 Keeping track of the hard drive  
 
If you are usin g the Jupiter Cipher ExDrive drive enclosure to encrypt multiple 
hard drives, it is important t o label your hard drive if y ou are taking th e drive 
out of the enclosure.  The hard drive with Jupiter Cipher ExDrive encryption 
will look like a brand new drive when attach dir ectly to the IDE or SATA 
controller of a co mputer. There will be no  partition or any hint to...

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 7
Chapter 4 
Jumper settings inside the Jupiter Cipher ExDrive Drive Case 
 
A. If the Jupiter Cipher ExDrive will be used e xternally with the external AC 
adapter, t he switch from the case must be  switch to the right, labeled EXT 
to grab power from external  power supply. 
 Application: Jupiter Cipher ExDrive can be set to receive  power EXT and be 
used with all three types of USIB cables. 
 
B. If the Jupiter Cipher ExDrive will be...

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 8
Chapter 5  
Hardware Installation Guide 
 
Exploded View of Enclosure shown with various components 
  

Addonics Technologies – Jupiter Cipher ExDrive User’s Guide v1.0 9
 
Step 2 
Align the male IDE connecto r on the 
2.5” hard drive with the female IDE 
connector on the PCB. Pus h the hard 
drive till the connector pins on the hard 
drive is fully seated inside the 
connector on the PCB.  
 
 
 
 
Step 3 
Wrap the shock absorber around the 
hard dr ive and PCB. 
 
 
 
 
 
 
 
Step 4 
Turn over the PCB and sec ure the 
hard drive to the PCB w ith the 
mounting screws that come with the 
kit....