Addonics Technologies External DigiDrive Flash Reader cipher udd User Manual

Addonics Technologies – Cipher UDD User’s Guide v1.0 10
Chapter 6 Attaching USIB interface cable  
 
 
 
 
 
 Note: If you use the SATA USIB cable with the Ciph er UDD, plug-in the USB  
power cable into the Extern al power input to provide pow er to the Cipher UDD. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

Addonics Technologies – Cipher UDD User’s Guide v1.0 11
Chapter 7 
 
7.1 USB2.0 USIB Cable (Model: AAUSBC-309) 
 
Note:  USB Jupiter Cipher ExDrive is Plug and Play under Windows XP, 
2000 and 98Me. There is no third party driver needed. 
 
  
 
· Since USB 2.0 Hi-Speed is an evolution of the existing USB 1.1 
specification, it is fully forward and backward compatible w ith current 
USB systems.  
· If you do not have an USB2.0 port,  you may install an optional USB2.0 
adapter or controller  
  
Driver...

Addonics Technologies – Cipher UDD User’s Guide v1.0 12
Driver Installation for Win98 and Win98SE 
1. Make sure your computer is up and runn ing. 
2. Insert the USB2.0 USIB  cable to the USB Port. 
3. A New Hardware Found message shall pop up, click Next. 
4. “What do you want Windows to do?” message opens. Select “Search for 
the best driver for your device,” click Next. 
5. “Specify  Location” message opens. Poin t to the location of  C:\My 
Documents\mass_storage_601where yo u unzip the files for the...

Addonics Technologies – Cipher UDD User’s Guide v1.0 13
7.2 eSATA USIB Cable (Model: AASAC-605E) 
 
 
 
                                
 
For Win98SE, Me, 2000 and XP 
 
Note: There are no drivers needed to use the Se rial ATA cable as long as the 
drivers are installed for the Serial ATA Controller card/chip. It is plug and 
play. 
 
 
Disk Management for Windows 98 
  
Note:  Refer to the SATARA ID Management Utility Manual 
SATARAID Manual V1.30 (for non-RAID5 Controllers) found in the 
Addonics...

Addonics Technologies – Cipher UDD User’s Guide v1.0 14
For Windows 2000 & XP Operating Systems 
 
How to use Disk Management 
To start Disk Management:  
1. Log on as administrator or as a member of the Administrators group. 
2. Click Start, click Run, type compmgmt.msc, and then click OK. In the 
console tree, click Disk Management. The Disk Management window 
appears. Your disks and volumes appear in a graphical view and list view. 
3. To customize how yo u view your disks an d volumes in th e upper...

Addonics Technologies – Cipher UDD User’s Guide v1.0 15
7. Confirm that the options that selecte d are correct, and then click Finish. 
 
The new partition or logical drive is created and appears in the appropriate 
basic disk in the Disk Mana gement window. If yo u chose to format the volume 
in step 6, th e format process now  starts. 
How to format a basic  volume 
To format a partition, logical drive or basic volume: 
1. In the Disk Management window, right-click the partition or logical drive 
that...

Addonics Technologies – Cipher UDD User’s Guide v1.0 16
Technical Support 
 
If you need assistan ce to get your unit functionin g properly, please call 
Addonics Technical Support .  Our technical staff will be happy to  assist you, 
but they will need your help to do so.  Calling th e technical support staff 
without all the proper information can be bo th time consuming and frustrating.  
Here are some tips to help you out: 
 
(1) MODEL NUMBER – Please have this number on hand. 
(2) SYSTEM INFORMATION...