Addonics Technologies External DigiDrive Flash Reader cipher udd User Manual

							Addonics Technologies – Cipher UDD User’s Guide v1.0 10
Chapter 6 Attaching USIB interface cable  
 
 
 
 
 
 Note: If you use the SATA USIB cable with the Ciph er UDD, plug-in the USB  
power cable into the Extern al power input to provide pow er to the Cipher UDD. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							Addonics Technologies – Cipher UDD User’s Guide v1.0 11
Chapter 7 
 
7.1 USB2.0 USIB Cable (Model: AAUSBC-309) 
 
Note:  USB Jupiter Cipher ExDrive is Plug and Play under Windows XP, 
2000 and 98Me. There is no third party driver needed. 
 
  
 
· Since USB 2.0 Hi-Speed is an evolution of the existing USB 1.1 
specification, it is fully forward and backward compatible w ith current 
USB systems.  
· If you do not have an USB2.0 port,  you may install an optional USB2.0 
adapter or controller  
  
Driver Install ation for Win98 and Win 98SE 
 
Downloading the USB2.0 USIB Cable Driver from the Addonics Driver 
Disk 
1. Insert the Addonics Driver Disk in the CDROM drive. The Addo nics 
Driver Disk window opens.  
2. Select Drivers > Interface Cables Drivers > USB2.0 Cable (AAUSBC-309) 
Win98/98SE Only. 
3. The Winzip Self-Extractor –AT2LP.exe window opens. Unzip file in My 
Documents.   
 
 
 
 
 
 
 
 
 
  
						

							Addonics Technologies – Cipher UDD User’s Guide v1.0 12
Driver Installation for Win98 and Win98SE 
1. Make sure your computer is up and runn ing. 
2. Insert the USB2.0 USIB  cable to the USB Port. 
3. A New Hardware Found message shall pop up, click Next. 
4. “What do you want Windows to do?” message opens. Select “Search for 
the best driver for your device,” click Next. 
5. “Specify  Location” message opens. Poin t to the location of  C:\My 
Documents\mass_storage_601where yo u unzip the files for the driver. 
Click  Next. 
6. “Driver file search for th e device %VID_ODBF&PID_0303%” then 
Building a driver database message opens. Let Windows f inish the 
installation and click Finish. 
 
 
Disk Management for Windows 98 
 
1. Select Start > Setting > Con trol Panel > System. The System Properties 
window opens. 
2. Select the Device Manager tab, un der Device type, Disk Drives, select your 
new hard drive. Click the Properties button. 
3. Select the Settings tab and un der the Options box, click the Removable  
check box. The Reserved drive letters box becomes active. Select the drive 
letter for your new drive. Click Ok. 
4. Click Yes to restart your sys tem to make chan ges take effect. 
5. Double click My Co mputer icon an d there should be an extr a drive letter 
for the Jupiter Cipher ExDrive drive. You may  now access the drive.          
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							Addonics Technologies – Cipher UDD User’s Guide v1.0 13
7.2 eSATA USIB Cable (Model: AASAC-605E) 
 
 
 
                                
 
For Win98SE, Me, 2000 and XP 
 
Note: There are no drivers needed to use the Se rial ATA cable as long as the 
drivers are installed for the Serial ATA Controller card/chip. It is plug and 
play. 
 
 
Disk Management for Windows 98 
  
Note:  Refer to the SATARA ID Management Utility Manual 
SATARAID Manual V1.30 (for non-RAID5 Controllers) found in the 
Addonics Techn ologies website 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							Addonics Technologies – Cipher UDD User’s Guide v1.0 14
For Windows 2000 & XP Operating Systems 
 
How to use Disk Management 
To start Disk Management:  
1. Log on as administrator or as a member of the Administrators group. 
2. Click Start, click Run, type compmgmt.msc, and then click OK. In the 
console tree, click Disk Management. The Disk Management window 
appears. Your disks and volumes appear in a graphical view and list view. 
3. To customize how yo u view your disks an d volumes in th e upper and lower 
panes of the window, point to Top or Bottom on the View menu, and then 
click the view that you want to use 
How to create a new partition or a new logical drive 
To create a new partition or logical dri ve on a basic disk:  
1. In the Disk Management  window, complete o ne of the following 
procedures, and then contin ue to step 2:  
· To create a new partition, right-click unallocated space o n the basic 
disk where you want to create the partition, an d then click New 
Partition. 
· To create a new logical drive in an extended partition, r ight-click free 
space on an extended partition where you want to create the logical 
drive, and then click New Logical Drive. 
2. In the New Partition Wizard, click Next. 
3. Click the type of  partition th at you w ant to create (either Primary 
partition, Extended partition, or Logical drive), and then click Next. 
4. Specify  the size of the partiti on in the Partition size in MB box, and then 
click Next. 
5. Decide w hether to manuall y assign a drive letter, let the system 
automatically enumerate the drive, or do not assign a drive letter to the 
new partition or logical drive, and then click Next. 
6. Specify the fo rmatting options you want to use by  using one of the 
following procedures: 
· If you do not want to format the par tition, click Do not format this 
partition, and then click Next. 
· If you want to format the par tition, click Format this partition with 
the following settings, and t hen complete the follow ing procedure in 
the Format dialog box: 
a. Type a name for the volume in the Volume label box. This is an 
optional step. Click the file system that  you want to use in the File 
system box. 
b. You can change the disk allocation unit siz e, and then specify  
whether to perform a quick format, or enable file and folder 
compression on NTFS volumes. 
        Click Next. 
  
						

							Addonics Technologies – Cipher UDD User’s Guide v1.0 15
7. Confirm that the options that selecte d are correct, and then click Finish. 
 
The new partition or logical drive is created and appears in the appropriate 
basic disk in the Disk Mana gement window. If yo u chose to format the volume 
in step 6, th e format process now  starts. 
How to format a basic  volume 
To format a partition, logical drive or basic volume: 
1. In the Disk Management window, right-click the partition or logical drive 
that you want to fo rmat (or reformat), and then  click Format.  
2. In the Format dialog box, type a name for the volume in the Volume label 
box. This is an optional step. 
3. Click the file system that you w ant to use in the File system box. If you 
want, you can also change the disk al location unit size, specify  whether you 
want to perform a quick format, or ena ble file and folder compression on 
NTFS volumes. 
4. Click OK. 
5. Click OK when you are prompted to fo rmat the volume. The format 
process starts. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							Addonics Technologies – Cipher UDD User’s Guide v1.0 16
Technical Support 
 
If you need assistan ce to get your unit functionin g properly, please call 
Addonics Technical Support .  Our technical staff will be happy to  assist you, 
but they will need your help to do so.  Calling th e technical support staff 
without all the proper information can be bo th time consuming and frustrating.  
Here are some tips to help you out: 
 
(1) MODEL NUMBER – Please have this number on hand. 
(2) SYSTEM INFORMATION – Type of computer, periph erals, etc. 
(3)   OPERATING SYSTEM – What version of Windows   
(4)   WHAT’S THE TROUBLE? – Give enough information  
About your problem so that we can recreate an d diagnose it. 
 
FREE Software Drivers for all Addonics Technologies 
Products are available 24 hours per day at the  
World Wide Web Site: www.addonics.com. 
 
Contact Information 
 
Addonics Technologies 
2466 Kruse Drive 
San Jose CA, 95131 
 
Phone:  408-433-3899 
Fax:  408-433-3898 
Email:  [email protected] 
Internet:  http://www.addonics.com 
 
TECHNICAL SUPPORT 
Phone:  408-433-3855 
Hours:  9:00-6:00 PST 
Email:  [email protected]