ADDERLink XDVI PRO DL KVM Extender Manual

10
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHER
 
INFORMATION
Operation
Power and activity indicators
Each	module	provides	two	indicators	to	confirm	power	status	and	also	feedback	about	
the various input signals:   
GENERAL USE
In use, the X-DVIPRO-DL modules should be transparent - the system and its 
peripherals should operate exactly as normal, the only difference being that they are now 
up to 50 meters apart. 
Video display (EDID) information
Extended	Display	Identification	Data	(or	EDID)...

11
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHER
 
INFORMATION
This chapter contains a variety of information, including the following:
•	Troubleshooting - see right
•	Getting assistance
•	Appendix A - Cables for use with digital extenders
•	Safety information
•	Warranty
•	Radio frequency energy statements
Further information
TROUBLESHOOTING
If you experience problems when installing or using the X-DVIPRO-DL modules, please 
check through this section for a possible solution. If your problem is...

12
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHER
 
INFORMATION
GETTING ASSISTANCE
If you are still experiencing problems after checking the information contained within this 
guide, then we provide a number of other solutions:
• Online solutions and updates – www.adder.com/support
 
Check the Support section of the adder.com website for the latest solutions and 
firmware	updates.
• Adder Forum – forum.adder.com
 
Use our forum to access FAQs and discussions.
• Technical support –...

13
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHER
 
INFORMATION
APPENDIX A  - Cables for use with digital extenders
Introduction
The demands of extending high resolution DVI and HDMI digital video signals are 
considerable and mean that it is not possible to use Cat5e cabling to ac\
hieve the 
maximum extension distance of 50 meters. The large video bandwidth involved means 
that to achieve the best possible performance from digital extenders, it is vital that the 
correct cabling is chosen.
There...

14
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHER
 
INFORMATION
Adder recommends
We recommend the following two types of cable:
Patch Cables
Daetwyler 7702P flex
This is stocked by Adder with the following part number VSCAT7-50. This is a 50m length 
of Daetwyler 7702P terminated with HRS TM31P RJ45 connectors.
CU 7702 4P flex
Flexible data cable S/FTP Cat.7 AWG26
1  Inner conductor:   AWG26 bare copper wire, stranded
2  Wire: 0.99 mm Ø
3  Screen pair:  Alu PETP foil
4  Screen: Tinned braided...

15
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHER
 
INFORMATION
RADIO FREQUENCY ENERGY
A Category 6a (or better) twisted pair cable must be used to connect the units in order 
to maintain compliance with radio frequency energy emission regulations and ensure a 
suitably high level of immunity to electromagnetic disturbances.
All other interface cables used with this equipment must be shielded in order to maintain 
compliance with radio frequency energy emission regulations and ensure a suitably...

16
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHER
 
INFORMATION
www.ctxd.com Documentation by:
© 2014 Adder Technology Limited
All trademarks are acknowledged.
Part	No.	MAN-X-DVIPRO-DL-ADDER	•	Release	1.0a
Web:  www.adder.com
Contact:  www.adder.com/contact-details
Support: forum.adder.com