ADDERLink XDVI PRO DL KVM Extender Manual

AdderLink X-DVIPRO-DL
User Guide   
Experts in 
Connectivity  
Solutions   
002E0039003000030028005B005700480051004700480055
00360052004F00580057004C005200510056  

1
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHERINFORMATION
Introduction
Welcome ................................................................................................................2
Cable type and distance rules......................................................................2
Supplied items .......................................................................................................3
Optional extras...

2
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHERINFORMATION
Introduction
WELCOME
Thank you for choosing the AdderLink X-DVIPRO-DL extenders. These compact 
modules provide the quickest way to extend high quality dual link DVI digital video plus 
USB keyboard, mouse and stereo audio with an additional two USB peripherals up to 50 
meters away from your computer. 
Thanks to our long involvement and investment in extender technology we have 
succeeded in overcoming the numerous problems associated...

3
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHERINFORMATION
SUPPLIED ITEMS
AdderLink DVIPRO-DLLocal module
USB cable 2m (type A to B) Part  number: VSC24Dual link video cable  DVI-D to DVI-DPart  number: VSCD3V 
2 x  12.5W power adapters and country- specific power cords
Information wallet containing:
Four self-adhesive rubber feetSafety document
3.5mm jack to jack  stereo audio cable Part  number: VSC22
AdderLink DVIPRO-DLRemote module   

4
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHERINFORMATION
OPTIONAL EXTRAS
Rack mount chassisPart	number:	X-RMK-CHASSIS
Rack mount kit for X-DVIPRO-DLPart	number:	X-RMK-FASCIA
HDMI to DVI-D video cablePart  number: VSCD11 
50 meter CAT7 link cablePart  number: VSCAT7-50    

5
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHERINFORMATION
Installation
CONNECTIONS
Installation of the X-DVIPRO-DL modules is straightforward and requires minimal 
configuration	in	most	cases.	
•	Connections at the local module
•	Connections at the remote module
Note: After all connections have been made, power up the display screen and the remote 
module first. Then power up the local module and finally switch on the computer. This will allow 
each item to correctly discover, in order, the one...

6
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHERINFORMATION
Connections at the local module
1 Where possible, ensure that power is removed from the computer system to be 
connected.
2 Use the supplied dual link DVI-D cable to connect the DVI 
input socket of the local module to the digital video 
output socket of the computer.
3 Use the supplied USB cable to link the USB socket of the 
local module to a vacant USB socket on the computer.
To video output port
To USB port
Note: Do not use USB cables...

7
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHERINFORMATION
Power connection
1 Connect the output lead of the supplied power 
adapter to the socket labeled POWER on the 
local module.  
2 Insert the IEC connector of the supplied power cord into the corresponding socket of 
the power adapter. 
Output lead from the power adapter 
3 Wait before connecting the other end of the power cord to a nearby mains outlet, 
until the remote module has been powered up.  The correct power up sequence is: 
 
a)...

8
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHERINFORMATION
Connections at the remote module
1 Place the remote module adjacent to the user location.
2 Connect a dual link DVI-D cable from the video monitor to 
the DVI output socket of the remote module.  
To video monitor
3 Connect the leads from the keyboard and mouse 
to the two USB sockets on the remote module. 
To keyboard, mouse and other USB peripherals
 
Note:  The total current that may be drawn from the USB ports is 1.2A, which should...

9
CONTENTS
INTRODUCTION
INSTALLATION
OPERATION
FURTHERINFORMATION
Power connection
1 Connect the output lead of the supplied power adapter 
to the socket labeled POWER on the remote module.  
Output lead from the power adapter 
2 Insert the IEC connector of the supplied power cord into the corresponding socket of 
the power adapter. 
3 After all connections are made, power up the display screen and connect the other 
end of this power cord to a nearby mains outlet. Then power up the local module and...