ADDER ePower Switch 1 Guard Manual

 
10
3.3. Configuration through the LAN using a standard Browser 
 
During the first installation, change temporarily the network settings of your PC according to the default 
network settings of the ePowerSwitch 1G
R2. 
 
Factory network settings of the ePowerSwitch 1G
R2: 
IP Address: 192.168.100.200 - Port: 80  
Gateway: 255.255.255.0 
 
1.  Open your Web browser and type following IP address:  
http://192.168.100.200/sysadmin.htm
 
 
2.  Enter the administrator name and password (default for both =...

11 
3.3.1. General / IP configuration 
 
This page enables you to define all the IP parameters of the ePowerSwitch 1GR2. 
 
 
DHCP Client enabled: 
Check this box is you want to obtain the IP address, the subnet mask and the default gateway for your 
ePowerSwitch 1G
R2 via DHCP. Factory default setting for this option is disabled. 
Use of DHCP (Dynamic Host Configuration Protocol) requires a DHCP host to be set up on the 
network. 
IP Address: 
IP address of the ePowerSwitch 1G
R2, default is...

 
12
3.3.2. General / System time 
 
The system time of the ePowerSwitch 1GR2 is used for synchronizing scheduling actions and to timestamp 
SNMP traps, Syslog information and internal logs. The system time can be set manually with the browser 
time of the connected computer or can be automatically synchronized with one or two NTP timeservers. 
 
 
 
Current System Time: 
This field shows the current system time of the ePowerSwitch 1G
R2.  
As the system time is displayed through the browser, a small...

13 
3.3.3. General / SNMP 
 
The ePowerSwitch 1GR2 provides a built-in SNMP (Simple Network Management Protocol) agent, which 
enables you to manage the ePowerSwitch 1GR2 through SNMP-based network management systems. 
The ePowerSwitch 1GR2 MIB file enables to remotely read out the status of all power outlets and the 
values of all sensors (temperature, humidity, ambient light). It also enables to control individually all power 
outlets and all groups of power outlets. The MIB file is stored on the...

 
14
3.3.4. General / Tools 
 
This page enables you to: 
- download and save the current settings of your ePowerSwitch 1G
R2 on your PC, 
- upload an existing configuration file to your ePowerSwitch 1GR2, 
- restore the factory settings, 
- download the ePowerSwitch 1G
R2 MIB file on your PC. 
 
 
 
Save: 
Click this button to save the current system settings onto your local hard drive. 
Load:  
Click this button and select a settings file you want to download to the ePowerSwitch 1G
R2. 
Restore: 
Click...

15 
3.3.5. Settings / Accounts 
 
3.3.5.1 Settings / Accounts  
 
This page is used to create, activate, deactivate, modify and delete up to 40 accounts. 
 
 
 
- To activate or deactivate an account, check or uncheck the corresponding checkbox. 
- To modify an account, click on Edit next to the corresponding account. 
- To delete an existing account, click on Delete next to the corresponding account. 
- To create an account, click on Add a New Account on the right side of the page.  
   A new page...

 
16 Device: 
In this drop-down list, choose a device from which you want to add Inputs or Outputs to the current 
account. 
Inputs/Outputs: 
This field is used to add/remove Inputs or Outputs to/from the current account. 
To add Inputs or Outputs to the current account, press the Ctrl key and click on the Inputs/Outputs of the 
device selected in the previous field. The selected Inputs/Outputs are marked dark blue and their IDs are 
listed at the right side of the Input/Output field. 
The ePowerSwitch...

17 
3.3.5.2 Settings / Accounts / Hidden Page account 
 
This account is intended for developers who want to implement the power outlet control in own programs. 
If activated, they can access to a special page named hidden.htm and control individually the power 
outlets using simple commands.  
 
- To activate or deactivate this account, check or uncheck the corresponding checkbox. 
- To modify the Hidden page account, click on Edit next to the corresponding account. 
   A new page appears, allowing you...

 
18 Device 
In this drop-down list, choose the device from which one you want to add an Inputs to the current account. 
-  Only properly connected devices or devices which already have been connected to the Power 
Switch appears in this field. 
- Each peripheral is clearly identified by its own ID followed by the name given during the 
configuration. Behind the ID can appear a character between brackets which has following 
meaning: 
-  ! means that the corresponding device is properly connected to the...

19 
3.3.6. Settings / Groups N/A 
 
3.3.7. Settings / Peripherals N/A 
 
 
3.3.8. Settings / Rules 
 
Rules are used to control actions according to a specific event. For example, you can define rules to 
switch the power outlet OFF from Friday evening to Monday morning. 
 
 
 
- To remove an existing rule, click on Delete of the corresponding rule.  
- To modify a rule, click on Edit of the corresponding rule. 
 
This page is used to create, modify and delete rules. 
- To add a new rule, click on Add a...