Adam Equipment Coin Counting Scale CCSArevC1 User Manual
Here you can view all the pages of manual Adam Equipment Coin Counting Scale CCSArevC1 User Manual. The Adam Equipment manuals for Scale are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
41 | P a g e © Adam Equipment Company 2009
6.2 OTHER SETTINGS
6.2.1 Restore Factory Calibration
To restore this calibration value it is necessary to do a simple
procedure. Press and hold the [Zero] key down for 3 seconds to put
the scale into a weighing display.
Press the [Total] key, the scale will beeps. The Factory Calibratio n
will be restored to the balance.
6.2.2 Shortcut to Calibration without using Functions
To calibrate...](http://img.usermanuals.tech/thumb/168/2124/w300_coin-counting-scale-ccsarevc1-1478546821_d-40.png "Page 41
41 | P a g e © Adam Equipment Company 2009
6.2 OTHER SETTINGS
6.2.1 Restore Factory Calibration
To restore this calibration value it is necessary to do a simple
procedure. Press and hold the [Zero] key down for 3 seconds to put
the scale into a weighing display.
Press the [Total] key, the scale will beeps. The Factory Calibratio n
will be restored to the balance.
6.2.2 Shortcut to Calibration without using Functions
To calibrate...")
41 | P a g e © Adam Equipment Company 2009 6.2 OTHER SETTINGS 6.2.1 Restore Factory Calibration To restore this calibration value it is necessary to do a simple procedure. Press and hold the [Zero] key down for 3 seconds to put the scale into a weighing display. Press the [Total] key, the scale will beeps. The Factory Calibratio n will be restored to the balance. 6.2.2 Shortcut to Calibration without using Functions To calibrate...
Page 42
42 | P a g e © Adam Equipment Company 2009 7.0 ERROR MESSAGES When power is first applied to the scale the software does a self check and then verifies the voltages from the load cell are a cceptable. The display will show error messages if the voltage is not within ce rtain limits. If these error messages appear contact your supplier for assistanc e. ERROR CODE DESCRIPTION POSSIBLE CAUSES Err 1 Error setting a date Trying to...
Page 43
43 | P a g e © Adam Equipment Company 2009
8.0 SPECIFICATIONS
CCSA
Capacity, Max
= 20 kg
d=
1g
NOTE: Weight is not displayed except
in special test program
Tare Range -20 kg
Working
Temperature 0ºC to 40ºC
Platform
225 x 275mm
Overall
315 x 355 x 110mm
Battery Life 50+ hours typical*
Power 230 VAC, 50/60 Hz., 10 watts
Net Weight 4.1 kg
*Battery Life is less when the optional backligh t is used
Page 44
44 | P a g e © Adam Equipment Company 2009
Page 45
45 | P a g e © Adam Equipment Company 2009 9.0 WARRANTY STATEMENT Adam Equipment offers Limited Warranty (Parts and Labor) for the components failed due to defects in materials or workmanship. Warranty starts from the date of deli very. During the warranty period, should any repairs be n ecessary, the customer must inform the supplier or Adam Equipment. The company or its authorised Technician reserves the right to repair or replace...
Page 46
46 | P a g e © Adam Equipment Company 2009 Manufacturer’s Declarat\fon of Confor\b\fty Th\fs product has been \banufactured \fn accordance w\fth the har\bon\fzed European standards, follow\fng the prov\fs\fons of the below stated d\frect\fves: Electro Magnet\fc Co\bpat\fb\fl\fty D\frect\fve 2004/108/EC Low Voltage D\frect\fve 2006/95/EC Adam Equipment Co. Ltd. Maidstone Road, Kingston, Milton Keynes, MK10 0BD United Kingdom FCC COMPLIANCE Th\fs equ\fp\bent has been tested...
Page 47
47 | P a g e © Adam Equipment Company 2009
Page 48
48 | P a g e © Adam Equipment Company 2009 A DAM EQUIPMENT \fs an I SO 9001:2000 cert\ff\fed global co\bpany w\fth \bore than 35 years exper\fence \fn the product\fon and sale of electron\fc we\fgh\fng equ\fp\bent. For a co\bplete l\fst\fng of all Ada\b scales and balances v\fs\ft our webs\fte at: www.adamequipment.com © Copyr\fght by Ada\b Equ\fp\bent Co. Ltd. All r\fghts reserved. No part of th\fs publ\fcat\fon \bay be repr\fnted or translated \fn any for\b or by...