Adam Equipment Coin Counting Scale CCSArevC1 User Manual
Here you can view all the pages of manual Adam Equipment Coin Counting Scale CCSArevC1 User Manual. The Adam Equipment manuals for Scale are available online for free. You can easily download all the documents as PDF.
Page 21
21 | P a g e © Adam Equipment Company 2009 5.0 PARAMETERS 5.1 SETTING COIN WEIGHT There are 9 coins and 2 tokens available for the us er in the South African version. Other versions of this scale may use othe r combinations. See the Secured Parameters Section (6.0) for details on how this can be changed. In addition each coin has a weight associated with the old style or a new style. For South Africa the initial values set for the coi ns...
Page 22
![Page 22
22 | P a g e © Adam Equipment Company 2009
5.1.1 Procedure
To enter this section of the program you will need the access code number. It
may be that your manager has changed the default ac cess code number to
another number. The default access code is 0000.
A restore code 4455 will set all coin weights as in the above table.
Press the [New/Old] key and then apply power. Then release the
key.
The displays will show:
“ Pin ” “...](http://img.usermanuals.tech/thumb/168/2124/w300_coin-counting-scale-ccsarevc1-1478546821_d-21.png "Page 22
22 | P a g e © Adam Equipment Company 2009
5.1.1 Procedure
To enter this section of the program you will need the access code number. It
may be that your manager has changed the default ac cess code number to
another number. The default access code is 0000.
A restore code 4455 will set all coin weights as in the above table.
Press the [New/Old] key and then apply power. Then release the
key.
The displays will show:
“ Pin ” “...")
22 | P a g e © Adam Equipment Company 2009
5.1.1 Procedure
To enter this section of the program you will need the access code number. It
may be that your manager has changed the default ac cess code number to
another number. The default access code is 0000.
A restore code 4455 will set all coin weights as in the above table.
Press the [New/Old] key and then apply power. Then release the
key.
The displays will show:
“ Pin ” “...
Page 23
![Page 23
23 | P a g e © Adam Equipment Company 2009
Unit weight is 1.987 grams for the new style and 3.960 for the old
style.
Press the [Total/
] key to reset the value desired. The unit
weight will change to 0.000 and flash.
“ 0.10” “ 0.000 ” “ 0.00”
Use the numeric keys to enter a new unit weight. F or example
press 1, 9, 8, and 5 to set, the numeric keys are s hown with small
numbers in the corner of the keys.
“ 0.10” “...](http://img.usermanuals.tech/thumb/168/2124/w300_coin-counting-scale-ccsarevc1-1478546821_d-22.png "Page 23
23 | P a g e © Adam Equipment Company 2009
Unit weight is 1.987 grams for the new style and 3.960 for the old
style.
Press the [Total/
] key to reset the value desired. The unit
weight will change to 0.000 and flash.
“ 0.10” “ 0.000 ” “ 0.00”
Use the numeric keys to enter a new unit weight. F or example
press 1, 9, 8, and 5 to set, the numeric keys are s hown with small
numbers in the corner of the keys.
“ 0.10” “...")
23 | P a g e © Adam Equipment Company 2009
Unit weight is 1.987 grams for the new style and 3.960 for the old
style.
Press the [Total/
] key to reset the value desired. The unit
weight will change to 0.000 and flash.
“ 0.10” “ 0.000 ” “ 0.00”
Use the numeric keys to enter a new unit weight. F or example
press 1, 9, 8, and 5 to set, the numeric keys are s hown with small
numbers in the corner of the keys.
“ 0.10” “...
Page 24
24 | P a g e © Adam Equipment Company 2009 5.2 DETERMINING NEW COIN OR TOKEN WEIGHTS The following procedure is used to determine the average weight of coins or tokens. This can be used to verify the coin weight stored in memory and to set new weights for tokens. 5.2.1 Procedure Before beginning have a representative sample of th e coins or tokens to be used. You should have a minimum of 10 0 pieces- larger the number...
Page 25
25 | P a g e © Adam Equipment Company 2009 It is then necessary to enter this value (rounded t o 3 places: x.xxx) into memory as above. For example 12883g fo r 2000 tokens is an average of 6.4415 grams, Enter 6.442 g rams. 5.3 SECURED FEATURES The CCSA Coin Counting scale has a number of functi ons that can only be accessed by a qualified user. Two levels of security are available. For the firs t level of security, a user...
Page 26
![Page 26
26 | P a g e © Adam Equipment Company 2009
5.4 WEIGHING PARAMETER FUNCTIONS
The following functions control the weighing system in the scale. To set these
functions, follow the procedure-
Turn the scale on while holding the [Total/
] key down and then
release the key.
“ Pin ” “ ” “ “
Enter the default access code “0000”.
“ Pin ” “ - - - - ” “ “
Press the [Total/
] key. The first function...](http://img.usermanuals.tech/thumb/168/2124/w300_coin-counting-scale-ccsarevc1-1478546821_d-25.png "Page 26
26 | P a g e © Adam Equipment Company 2009
5.4 WEIGHING PARAMETER FUNCTIONS
The following functions control the weighing system in the scale. To set these
functions, follow the procedure-
Turn the scale on while holding the [Total/
] key down and then
release the key.
“ Pin ” “ ” “ “
Enter the default access code “0000”.
“ Pin ” “ - - - - ” “ “
Press the [Total/
] key. The first function...")
26 | P a g e © Adam Equipment Company 2009 5.4 WEIGHING PARAMETER FUNCTIONS The following functions control the weighing system in the scale. To set these functions, follow the procedure- Turn the scale on while holding the [Total/ ] key down and then release the key. “ Pin ” “ ” “ “ Enter the default access code “0000”. “ Pin ” “ - - - - ” “ “ Press the [Total/ ] key. The first function...
Page 27
![Page 27
27 | P a g e © Adam Equipment Company 2009
“ F1 ” “ bAud ” “ 1200 ”
Current baud rate
For setting a new baud rate use the [MC/
] key to cycle through the
options which are 600, 1200, 2400, 4800 and 9600.
“ F1 ” “ bAud ” “ 4800 ”
New baud rate
Press [CE /Esc] to escape without changes before it is stored or p ress
the [Total /
] key to confirm and store the new value....](http://img.usermanuals.tech/thumb/168/2124/w300_coin-counting-scale-ccsarevc1-1478546821_d-26.png "Page 27
27 | P a g e © Adam Equipment Company 2009
“ F1 ” “ bAud ” “ 1200 ”
Current baud rate
For setting a new baud rate use the [MC/
] key to cycle through the
options which are 600, 1200, 2400, 4800 and 9600.
“ F1 ” “ bAud ” “ 4800 ”
New baud rate
Press [CE /Esc] to escape without changes before it is stored or p ress
the [Total /
] key to confirm and store the new value....")
27 | P a g e © Adam Equipment Company 2009
“ F1 ” “ bAud ” “ 1200 ”
Current baud rate
For setting a new baud rate use the [MC/
] key to cycle through the
options which are 600, 1200, 2400, 4800 and 9600.
“ F1 ” “ bAud ” “ 4800 ”
New baud rate
Press [CE /Esc] to escape without changes before it is stored or p ress
the [Total /
] key to confirm and store the new value....
Page 28
![Page 28
28 | P a g e © Adam Equipment Company 2009
5.4.2 F2
F2F2
F2
- PARITY
To change parity used with the RS-232 interface, fo llow this procedure.
When the display is showing:
“ F2 ” “ ParitY ” “ SEt ”
Press the [Total/
] key.
“ F2 ” “ ParitY ” “ n 8 1 ”
Current parity, N one, 8 data bits, 1 stop bit
For a new parity setting, use the [MC/
] key to cycle through the
following options:
n81...](http://img.usermanuals.tech/thumb/168/2124/w300_coin-counting-scale-ccsarevc1-1478546821_d-27.png "Page 28
28 | P a g e © Adam Equipment Company 2009
5.4.2 F2
F2F2
F2
- PARITY
To change parity used with the RS-232 interface, fo llow this procedure.
When the display is showing:
“ F2 ” “ ParitY ” “ SEt ”
Press the [Total/
] key.
“ F2 ” “ ParitY ” “ n 8 1 ”
Current parity, N one, 8 data bits, 1 stop bit
For a new parity setting, use the [MC/
] key to cycle through the
following options:
n81...")
28 | P a g e © Adam Equipment Company 2009
5.4.2 F2
F2F2
F2
- PARITY
To change parity used with the RS-232 interface, fo llow this procedure.
When the display is showing:
“ F2 ” “ ParitY ” “ SEt ”
Press the [Total/
] key.
“ F2 ” “ ParitY ” “ n 8 1 ”
Current parity, N one, 8 data bits, 1 stop bit
For a new parity setting, use the [MC/
] key to cycle through the
following options:
n81...
Page 29
![Page 29
29 | P a g e © Adam Equipment Company 2009
Press [MC/
] to advance to the next functions
“ F3 ” “ SLEEP ” “SEt ”
Or press [CE /Esc] to return to normal operation.
5.4.3 F
FF
F3
33
3
- SLEEP
The scale can be set to trun off automatically if i t is not being used. The time
can be from 1 to 10 minutes, or disabled. To change the time , follow this
procedure.
When the display is showing:
“ F3 ” “ SLEEP ” “ SEt ”...](http://img.usermanuals.tech/thumb/168/2124/w300_coin-counting-scale-ccsarevc1-1478546821_d-28.png "Page 29
29 | P a g e © Adam Equipment Company 2009
Press [MC/
] to advance to the next functions
“ F3 ” “ SLEEP ” “SEt ”
Or press [CE /Esc] to return to normal operation.
5.4.3 F
FF
F3
33
3
- SLEEP
The scale can be set to trun off automatically if i t is not being used. The time
can be from 1 to 10 minutes, or disabled. To change the time , follow this
procedure.
When the display is showing:
“ F3 ” “ SLEEP ” “ SEt ”...")
29 | P a g e © Adam Equipment Company 2009 Press [MC/ ] to advance to the next functions “ F3 ” “ SLEEP ” “SEt ” Or press [CE /Esc] to return to normal operation. 5.4.3 F FF F3 33 3 - SLEEP The scale can be set to trun off automatically if i t is not being used. The time can be from 1 to 10 minutes, or disabled. To change the time , follow this procedure. When the display is showing: “ F3 ” “ SLEEP ” “ SEt ”...
Page 30
30 | P a g e © Adam Equipment Company 2009 5.4.4 F FF F4 44 4 - Weight Calibration To calibrate the scales it is necessary to have a w eight suitable to the capacity of the scale. It should have a mass near t o the capacity of the scale, without exceeding it. For example use 20kg mass to calibrate the CCSA. The calibration weight should be accurate to assure acc uracy of all weighing. Weights of OIML Class M1 or better should be used. Other values of mass...