Adam Equipment CBD Bench Counting Scales CBDREVBAE2 User Manual

							©

 Adam Equipment Company 2011  Page  
39 
W

ARRANTY INFORMATION 
Adam  Equipment  offers  Limited  Warranty  (Parts  and  Labour)  for  the  components 
failed  due  to  defects  in  materials  or  workmanship.    Warranty  starts  from  the  date  of 
delivery. 
During  the  warranty  period,  should  any  repairs  be  necessary,  the  purchaser  must 
inform  its  supplier  or  Adam  Equipment  Company.  The  company  or  its  authorised 
Technician  reserves  the  right  to  repair  or  replace  the  components  at  any  of  its 
workshops  depending  on  the  severity  of  the  problems.  However,  any  freight  involved 
in  sending  the  faulty  units  or  parts  to  the  service  centre  should  be  borne  by  the 
purchaser. 
The  warranty  will  cease  to  operate  if  the  equipment  is  not  returned  in  the  original 
packaging  and with correct documentation for a claim to be processed. All claims are 
at the sole discretion of Adam Equipment. 
This warranty does not cover equipment where defects or poor performance is due to 
misuse,  accidental  damage,  exposure  to  radioactive  or  corrosive  materials, 
negligence,  faulty  installation,  unauthorised  modifications  or  attempted  repair  or 
failure  to  observe  the  requirements  and  recommendations  as  given  in  this  User 
Manual. Additionally  rechargeable  batteries  (where  supplied)  are  not  covered  under 
warranty. 
Repairs  carried  out  under  the  warranty  does  not  extend  the  warranty  period. 
Components removed during the warranty repairs become the company property. 
The statutory right of the purchaser is not affected by this warranty. The terms of this 
warranty  is  governed  by  the  UK  law.  For  complete  details  on  Warranty  Information, 
see the terms and conditions of sale available on our web-site.  
						

							©

 Adam Equipment Company 2011  Page  
40  
						

							© Adam Equipment Company 2011 
Manufacturer’s Declaration of Conformity 
This product has been manufactured in accordance with the harmonised European standards,  following the provisions of the below stated directives: 
Electro Magnetic Compatibility Directive 
2004/108/EC 
Low Voltage Directive 
2006/95/EC 
 Adam Equipment Co. Ltd. 
Maidstone Road, Kingston,  
Milton Keynes, MK10 0BD  United Kingdom 

FCC COMPLIANCE 
This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  A  digital  device, 
pursuant  to  Part  15  of  the  FCC  Rules.    These  limits  are  designed  to  provide  reasonable  protection 
against  harmful  interference  when  the  equipment  is  operated  in  a  commercial  environment.    The 
equipment  generates,  uses,  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in 
accordance  with  the  instruction  manual,  may  cause  harmful  interference  to  radio
  communications. 
Operation  of  this  equipment  in  a  residential  area  is  likely  to  cause  harmful  interference  in  which  case 
the user will be required to correct the interference at his own expense. 
Shielded  interconnect  cables  must  be  employed  with  this  equipment  to  insure  compliance  with  the 
pertinent RF emission limits governing this device. 
Changes  or  modifications  not  expressly  approved  by  Adam  Equipment  could  void  the users authority 
to operate the equipment. 
WEEE COMPLIANCE 
Any  Electrical  or  Electronic  Equipment  (EEE)  component  or  assembly  of  parts  intended  to  be 
incorporated  into  EEE  devices  as  defined  by  European  Directive  2002/95/EEC  must  be  recycled  or 
disposed  using  techniques  that  do  not  introduce  hazardous  substances  harmful  to  our  health  or  the 
environment  as  listed  in  Directive  2002/95/EC  or  amending  legislation.    Battery  disposal  in  Landfill 
Sites  is  more  regulated  since  July  2002  by  regulation  9  of  the  Landfill  (England  and  W ales) 
Regulations  2002  and  Hazardous  W aste  Regulations  2005.  recycling  has  become  topical  and  the 
W

aste  Electrical  and  Electronic  Equipment  (W EEE)  Regulations  are  set  to  impose  targets  for 
recycling.
    
						

							©
 Adam Equipment Company 2011  
A

DAM EQUIPMENT  is an ISO 9001:2008 certified global company with more 
than 35 years experience in the production and sale of electronic weighing 
equipment.  
Adam products are predominantly designed for the Laboratory, Educational, 
Medical, retail and Industrial Segments. The product range can be described as 
follows: 
-Analytical and Precision Balances 
-Compact and Portable Balances 
-High Capacity Balances 
-Moisture analysers / balances 
-Mechanical Scales  
-Counting Scales 
-Digital Weighing/Check-weighing Scales 
-High performance Platform Scales  
-Crane scales 
-Medical Scales 
-Retail Scales for Price computing For a complete listing of all Adam products visit our website at  www.adamequipment.com
 
© Copyright by Adam Equipment Co. Ltd.  All rights reserved.  No part of this publication 
may be reprinted or translated in any form or by any means without the prior permission of  Adam Equipment. 
Adam Equipment reserves the right to make changes to the technology, features,  specifications and design of the equipment without notice. 
All information contained within this publication is to the best of our knowledge timely,  complete and accurate when issued.  However, we are not responsible for misinterpretations which may result from the reading of this material. 
The latest version of this publication can be found on our Website. 
www.adamequipment.com