Adam Equipment AELP Pallet Beams GCREVC6 User Manual

 P a g e 19                     © Adam Equipment Company 2010 
 Data Format-Normal Output:  
Data Format- Memory Recall Print:   
  
 
DATE            12/09/2006  
TIME            14:56  
  
GROSS Wt       1.234 Kg     Net Wt. if net weight is displayed 
Unit Wt.         123 g      Kg or g for metric weights and lb for pounds.  
Pcs               10 pcs  
                     Includes 2 line feeds with carriage return 
            at beginning and end of  the form 
  
DATE            12/09/2006  
TIME...

 P a g e 20                     © Adam Equipment Company 2010 
Data Format- Continuous Print: 
  
In  other  languages  the  format  is  the  same  but  the  t ext  will  be  in  the  language 
selected. See Section 9.2 
Description  ENGLISH  FRENCH  GERMAN   SPANISH 
Print  gross  
weight  Gross Wt  Pds Brut  Brut-Gew  Pso Brut 
Net weight 
Net Wt.  Pds Net  Net-Gew  Pso Net 
Weight  per  
unit counted
 
Unit Wt.  Pds unit  Gew/Einh  Pso/Unid 
Number  of  
items 
counted Pcs  Pcs  Stck.  Piezas 
Number...

 P a g e 21                     © Adam Equipment Company 2010 
 
9.1   INPUT COMMANDS FORMAT  
The  scale  can  be  controlled  with  the  following  comm ands.  The  commands  must  be 
sent  in  upper  case  letters,  i.e.  “T”  not  “t”.  Press   the  Enter  key  of  the  PC  after  each 
command.  
T    Tares  the  scale  to  display  the  net  weight.  This  is 
the  same  as 
pressing  [Tare] key. 
Z    Sets the zero point for all subsequent weighing. Th
e display shows 
zero. Same as pressing the...

 P a g e 22                     © Adam Equipment Company 2010 
9.2  RS-232 SETUP  
The  RS-232  interface  uses  parameters  set  by  the  use r  for  language,  baud  rate  and 
date format.   
Press and hold the  [Print] key for 4 seconds to access the parameters.  
Press   [U.  Wt./Units]  to scroll through the options and  [Tare] to confirm the change 
and then advance to the next parameter.  
When a parameter is entered by pressing  [Tare], the displays will guide you through 
the parameter selected...

 P a g e 23                     © Adam Equipment Company 2010 
The  scale  will  perform  the  following  functions  depending  on  the  Accumulation  and  Print 
settings:  
 
 
ACCUMULATION FUNCTIONS 
 
PRINT  
FUNCTIONS
 AC Auto  AC mAn  AC oFF 
Print Auto  Accumulate  and  
print automatically  
Print automatically ;  
Accumulate  and  print  
when
 [M+]  is pressed 
  Print  automatically,  
[M+]
  key  has  no 
function 
Print mAn  Automatically  
Accumulate  but  not 
print,  Print  only 
when...

 P a g e 24                     © Adam Equipment Company 2010 
  
9.3
   REAL TIME CLOCK SETUP 
The  Real  Time  Clock  (RTC)  is  used  only  for  the  RS-2 32  output.    The  Date  and  Time 
can be set  as  required.    The  scale  will  keep  the cl ock  running even  when  the power 
is off. 
Setting up the clock  
  Press  and  hold  the   [CE]  key  for  4  seconds,  release  when  the  date  and  time  is 
displayed.  The initial displays show the current d ate and time set.   
“ rtC       “...

 P a g e 25                     © Adam Equipment Company 2010 
9.4  AUTO SLEEP FUNCTION 
This  function  may  be  enabled  or  disabled  by  the  use r.  If  enabled,  when  the  scale  is 
not  used  for  some  time  (as  pre-set  by  the  user  unde r  this  function)  it  automatically 
switches off. To set this parameter- 
  Press  and  hold  the   [Zero]  key  for  4  seconds,  release  when  the  display 
shows  “SLEEP nodE” . 
   Press  [U/Wt/Unit]  key to scroll through the auto sleep values....

 P a g e 26                     © Adam Equipment Company 2010 
10.2  BACKLIGHT FOR LCD 
   The backlight of the LCD can be set to be- 
“1” : ON at all the time,  
“2” : ON only when a weight is placed on the scale or  
“3” : Turned off.    
   To set the backlight press and hold  [Pst] key for 4 seconds.   
   The  weight  display  will  show  “EL xx”  where  xx  is  the  current  setting  for 
the backlight.    
Press  [U. Wt./Units]  to scroll through the options. 
“EL on”  Sets the backlight to be...

 P a g e 27                     © Adam Equipment Company 2010 
 
11.0  ERROR CODES 
During the initial power-on testing or during operation, the scale may show an error 
message.  The meaning of the error messages is desc ribed below. 
If  an  error  message  is  shown,  repeat  the  step  that  caused  the  message,  turning  the 
balance  on,  carry  out  the  calibration  or  other  func tions.  If  the  error  message  is  still 
shown contact your dealer for further support.     
ERROR CODE...

 P a g e 28                     © Adam Equipment Company 2010 
 
12.0  SERVICE PARAMETERS 
12.1  USING “0000” TO ENTER THE CALIBRATION PARAMETER 
   Press  the   [Tare]  key  during  the  display  counting  when  turned  on.  Th e 
display will ask for a code number,  “Pin    “ on the Weight Display.  
   Enter  the  number  0000 when  “Pin    “  is  displayed  and    then  press  
[Tare] .  If  another  PIN  number  has  been  previously  stored  enter  that 
number instead.  
   The displays will...