Adam Equipment AELP Pallet Beams GCREVC6 User Manual
Here you can view all the pages of manual Adam Equipment AELP Pallet Beams GCREVC6 User Manual. The Adam Equipment manuals for Pallet Beam are available online for free. You can easily download all the documents as PDF.
Page 1
© Adam Equipment Company 2010 A dam Eq\bipme\ft GC INDICA\bOR (P.N. 3056610550, Revisio\f C6, A\bg\bst 2010) Software Rev 2.18 a\fd \bp
Page 2
© Adam Equipment Company 2010
Easy Reference:
Model name of the indicator/scale:
Serial number of the unit:
Software revision number
(Displayed when power is first turned on):
Date of Purchase:
Name of the supplier and place:
Page 3
P a g e 1 © Adam Equipment Company 2010 CONTENTS 1.0 INTRODUCTION ....................................... ............................................3 2.0 SPECIFICATIONS ..................................... ...........................................4 3.0 INSTALLATION ....................................................................................6 3.1 UNPACKING ......................................................................................6 3.2 LOCATING...
Page 4
P a g e 2 © Adam Equipment Company 2010
Page 5
P a g e 3 © Adam Equipment Company 2010 1.0 INTRODUCTION The GC series provides accurate, fast and versatile parts counting scales. There are 2 types of scales within the GC series ：GC indicators are kilogram/gram scales and the GC-a indicators are changeable from pounds to kilograms if the user requires it. The indicators have the same functions except that GC-a scales have the ability to toggle between the two weighing...
Page 6
P a g e 4 © Adam Equipment Company 2010 2.0 SPECIFICATIONS INPUT SECTION Load Cells Up to 4, 350 ohm load cells Minimum 87 ohms, maximum 1120 ohms Connection 4 wire or 6 wire load cells Excitation 5Vdc Sensitivity 0.15uv/d Linearity 0.01% FS Zero Range 0-10mv Signal range 0-40mv ADC Sensitivity Approximately 0.015 uv/ADCount DIGITAL SECTION Maximum Range 100 g – 30000 g 1 kg – 30000 kg 1 lb to 30000 lb Divisions Up to 30,000 Stabilization Time 2 Seconds...
Page 7
P a g e 5 © Adam Equipment Company 2010 Overall Dimensions (wxdxh) 260 x 110 x 170mm 10.2” x 4.3” x 6.7” Net Weight 1.1 kg / 2.4 lb Applications Counting Scales Functions Parts counting, weighing, accumulating memory, pre-set count with alarm Interface RS-232 bi-directional interface English, German, French, Spanish selectable text Date/Time Real Time Clock (RTC), To print date and time information (Dates in year/month/day, day/month/year or month/day/year...
Page 8
P a g e 6 © Adam Equipment Company 2010 3.0 INSTALLATION 3.1 UNPACKING This indicator must be connected to a load cell pla tform and calibrated as necessary to match the platform and user requirements. See Se ction 12.0 for set-up information. The user’s application and the technical specificat ions of the platform or load cell will determine the necessary configuration. 3.2 LOCATING The scales should not be placed...
Page 9
P a g e 7 © Adam Equipment Company 2010 3.3 CONNECTION This indicator must be connected to a load cell pla tform and calibrated as necessary to match the platform and user requirements. The GC has a connector configured for either 4 or 6 wire load cells. Connect the load cells/platform to the indicator as shown below . The cable length should be as short as possible, using a large size wire to minimi se errors due to...
Page 10
![Page 10
P a g e 8 © Adam Equipment Company 2010
4.0 KEY
DESCRIPTIONS
Keys Functions
[0-9, .] Numeric entry keys, used to manually enter a value for tare weights, unit
weight, and sample size.
[CE] Used to clear the unit weight or an erroneous entry .
[M+] Add the current count to the accumulator. Up to 99 values or full capacity of
the weight display can be added. Also prints the di splayed values when Auto
print is switched off.
[MR] To recall the accumulated memory....](http://img.usermanuals.tech/thumb/168/2116/w300_aelp-pallet-beams-gcrevc6-1478546342_d-9.png "Page 10
P a g e 8 © Adam Equipment Company 2010
4.0 KEY
DESCRIPTIONS
Keys Functions
[0-9, .] Numeric entry keys, used to manually enter a value for tare weights, unit
weight, and sample size.
[CE] Used to clear the unit weight or an erroneous entry .
[M+] Add the current count to the accumulator. Up to 99 values or full capacity of
the weight display can be added. Also prints the di splayed values when Auto
print is switched off.
[MR] To recall the accumulated memory....")
P a g e 8 © Adam Equipment Company 2010 4.0 KEY DESCRIPTIONS Keys Functions [0-9, .] Numeric entry keys, used to manually enter a value for tare weights, unit weight, and sample size. [CE] Used to clear the unit weight or an erroneous entry . [M+] Add the current count to the accumulator. Up to 99 values or full capacity of the weight display can be added. Also prints the di splayed values when Auto print is switched off. [MR] To recall the accumulated memory....