Acer Travelmate 3010 Service Guide

Chapter 135
8X DVD Dual Interface
ItemSpecification
Vendor & model name Lite-On SOSW-833S PANASONIC UJ-840
Performance Specification
Transfer rate (KB/sec)
(1) Read
              DVD-ROM(single layer) : 1.7-4X, 2.5-
6X, 3.3-8X(CAV)
DVD-ROM(dual layer) : 1.7-4X, 2.5-
6X(CAV)
DVD+R : 1X,2.4X(CLV) / 1.7-4X, 2.5-
6X, 3.3-8X(CAV)
DVD+RW : 1X, 2.4X(CLV) / 1.7-4X, 
2.5-6X(CAV)
Double layer DVD+R: 1X, 2.4X(CLV) / 
1.7-4X(CAV)
Double layer DVD-R: 1X, 2.4X(CLV) / 
1.7-4X(CAV)
DVD-R : 1X, 2X / 1.7-4X, 2.5-6X, 3.3-...

36Chapter 1
Combo Drive Interface
ItemSpecification
Vendor & model name LITEON SOSC-2483K PANASONIC UJDA-770
Performance 
Specification
Transfer rate (KB/
sec)(DVD)Sustained:
Max 10.1Mbytes/secSustained:
Max 10.8Mbytes/sec
Access Time(Typical) DVD: Random Access: 100 ms
DVD:Full Stroke: 190 msDVD: Typical:180 ms
Buffer Memory 2MB 2MB
Interface Compliant to ATA/ATAPI-5, MMC-
3ATAPI interface
Applicable disc format CD-DA, CD ROM Mode-1, CD-
ROM/XA Mode-2 Form-1 and 
Form-2, CD-I Ready, Video-
CD(MPEG-1),...

Chapter 137
Dimensions and Weight
ItemDetails
ModelAspire 1690Aspire 3510
Deminsions 297.5mm(W) x 210mm(D) x 24.5mm(H)
Weight 

Chapter 238
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, 
if you encounter configuration problems, you may need to run Setup.  Please also refer to Chapter 4
 Troubleshooting when problem arises.
To activate the BIOS Utility, press 
m during POST (when “Press  to enter Setup” message is prompted
 on the...

39Chapter 2
Information
ParameterDescription
CPU Type This item will show the CPU information of the system.
CPU Speed This item will show the CPU clock speed.
IDE1 Model Name This item will show the Model name of HDD installed on Primary IDE 
master. The hard disk model name is automatically detected by the 
system. If there is no hard disk present or unknown type, “None” 
should be shown on this field
IDE1 Serial Number This item will show the Serial number of HDD installed on Primary IDE 
master. If...

Chapter 240
Main
This menu provides you the information of the system.
ParameterDescription
System Time / System 
Date The hours are displayed with 24 hours format. The values set in these two fields 
take effect immediately.
System Memory This field reports the memory size of system base memory.  The size is fixed to 
640KB. 
Extended Memory This field reports the memory size of the extended memory in the system. 
Extended Memory size = Total memory size - 1 MB 
Video Memory VGA Memory size = 128MB...

41Chapter 2
F12 Boot Menu When this is selected, users can modify device boot priority by pressing F12 key 
during POST. When this is not selected, device boot priority will not be 
adjustable during POST.
D2D Recovery Allow user to enable/disable the Disk-to-Disk recovery
ParameterDescription 

Chapter 242
Advanced
The Advanced screen contains parameters involving your hardware devices. It also provides advanced
 settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
 parameter settings.
DescriptionOption
Serial Port Configure serial port A using options:
[Disabled]: No configuration
[Enabled]: User configuration
[Auto]: BIOS or OS chooses configuration
(OS Controlled) Displayedd when controlled 
by OSDisabled
Enabled...

43Chapter 2
Infrared Port  Configure serial port B using options:
[Disabled]: No configuration
[Enabled]: User configuration
[Auto]: BIOS or OS chooses configuration
(OS Controlled) Displayedd when controlled 
by OSDisabled
Enabled
Auto
Parallel Port Configure serial port B using options:
[Disabled]: No configuration
[Enabled]: User configuration
[Auto]: BIOS or OS chooses configuration
(OS Controlled) Displayedd when controlled 
by OSDisabled
Enabled
Auto
Mode Set the mode for the parallel port  Output...

Chapter 244
Security
The Security screen contains parameters that help safeguard and protect your computer from 
unauthorized use.
The table below describes the parameters in this screen. Settings in boldface are the default and 
suggested  parameter settings.
ParameterDescriptionOption
Supervisor Password Is N/A N/A
User Password Is N/A N/A
HDD Password Is N/A N/A
Set Supervisor Password Press Enter to set the administrator 
password. When set, this password 
protects the BIOS Setup Utility from...