Acer Travelmate 210 Service Guide

							Chapter 345
Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence 
and instructs you on the components that need to be removed during servicing. For example, if you want to 
remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in 
that order.
START
MODEM
COVERBATTERYCDROM
MODULEDIMM
COVERHINGE CA P
HDD
MODULEMODEM
LCD CABLE
COVERKEYBOARDLAUNCH
BOARD
VIDEO
CAP TURE
KIT COVER
CDROMDIMMMIDDLE
COVER
HDD DRIVE
HDD COVE R
HDD DRIVE
CONNE CT-
OR
CDROM
BOARD
LCD FPC
CAB LE B*1
B*2 E*4
J*2
D*2B*1 A*1
C*2 F*2
LCD
MODULEG*4
G*5
G*2
LCD
LCD
BRACKETMICRO-
PHONE B*2LCD FPC
Cable
MAIN UNITLCD BEZEL
INVERTER
BOARDSPEAKER
G*2
G*2 
						

							46Chapter 3
MAIN UNIT
UPPER
CASE
CHARGER
PLATE
FAN
AUDIO
BOARD
CPU
HEATSINK
RTC
BETTERY
FDD
MODULE
FDD DRIVE
FDD
DRIVE
FPC
CABLEFDD
DRIVE
BEZEL
D*4
D*8
H*1B*1
B*2
I*6 G*1
TOUCH
PAD
FRAME
TOUCH
PAD
SCROLL
BUTTON
TOUCH
PAD
BOARD
PanelMAIN
BOARD
B*3
PCMCIA
SOCKET
PCMCIA
PLATEI/O
BRACKETMODEM
CABLEB*4
D*2 
						

							Chapter 347
Screw List
ItemPart No.Description
A 86.9A353.6R0
M2.5*6
B
86.4A322.4R0M2*4L
C
86.5A524.4R0M3*4L
D
86.1A322.120 M2.0*12
E
86.9A552.3R02ML3
F
86.9A322.4R0 M2.0*4
G
86.9A553.4R0 M2.5*4L
H
86.4A522.5R0M2*5
I
34.00015.221 SCR. HEX NUT W / WASHER&NYLOK#4
J
86.00A19.120 CD-ROM SPECIAL SCREW 
						

							48Chapter 3
Removing the Battery Pack
1.
To remove the battery pack, push the battery release button inward then slide the battery pack out from 
the machine.
Removing the Battery Cover
1.
To remove the battery cover, press the cover side outward carefully then remove the cover. 
						

							Chapter 349
Removing the CD-ROM Drive Module
1.
To remove the CD-ROM drive module, push the release button outward.
2.
Slide it out from the machine.
Disassembling the CD-ROM Drive Module
1.
To disassemble the CD-ROM drive module, first remove four screws as shown.
2.
Remove the CD-ROM drive module from the CD-ROM drive chassis. 
						

							50Chapter 3
3.Remove the two screws from the CD-ROM board then remove the CDROM board from the drive. 
						

							Chapter 351
Removing the Hard Disk Drive Module
1.
To remove the hard disk drive, first remove the hard disk drive cover screw, then remove the cover.
2.
Remove the hard disk drive module out from the machine carefully.
Disassembling the Hard Disk Drive Module
1.
To disassemble the hard disk drive module, first remove the two screws from the hard disk drive bracket.
2.
Remove the gasket from the hard disk drive module. 
						

							52Chapter 3
3.Bend both sides of the hard disk drive then remove the hard disk drive from the hard disk drive bracket.
4.Disconnect the hard disk drive connector from the hard disk drive. 
						

							Chapter 353
Removing the Extended Memory
1.
To remove the Extended memory from the machine, first remove the screw from the memory cover
2.
Push the memory cover leftward to lift the cover off, then remove the memory cover.
3.
Push out the latches on both sides of the socket and pull the memory module out from the socket. 
						

							54Chapter 3
Removing the Modem Board
1.
To remove the modem board, first remove the screw from the modem cover.
2.
Remove the modem cover from the machine.
3.
Remove two screws from the modem board as shown, then remove the modem board from the main unit 
carefully by using a plastic bladed screw driver.
4.
Disconnect the modem cable from the modem board, then remove the modem board.