Acer Projector Pd310 User Manual

11
English
. x a M 5 2 8 9 3 2 1 7 9 1 6 4 2 0 0 3
. n i M0 22 82 0 13 6 14 0 25 4 2
) H x W ( . x a M 0 . 5 1 x  0 . 0 2 8 . 8 5 x  4 . 8 7 8 . 3 7 x  4 . 8 9 2 . 8 1 1 x  6 . 7 5 1 6 . 7 4 1 x  8 . 6 9 1 0 . 0 8 1 x  0 . 0 4 2
) H x W ( . n i M0 . 2 1 x  0 . 6 12 . 9 4 x  6 . 5 62 . 1 6 x  6 . 1 88 . 7 9 x  4 . 0 3 14 . 2 2 1 x  2 . 3 6 10 . 7 4 1 x  0 . 6 9 1
 3 . 3 1 . 3 1 4 . 6 1 2 . 6 2 8 . 2 3 4 . 9 3
You may adjust zoom ring to zoom in / out.  Rotate the zoom ring counter-clockwise
to zoom in and...

12
English
Panel Control & Remote Control
There are two ways for you to control the function: Remote Control and
Panel Control.
User Controls
Power / Standby
4
Refer to the “Power On/Off the Projector” section on page 8~9.
Source
4
Press “Source” to choose RGB, Digital RGB, S-Video and Composite sources.
Reset
4
When you press the “Reset” button, the OSD menus displays a message “Reset All Yes/NO
 ? ”. Select “Yes” to confirm or select “ No” to cancel.This function will reset all user
adjustable...

13
English
Use the Panel Control
4Automatically synchronizes the projector to the input source, when you press this button
while the OSD isn’t displayed.
Four Directional Select Keys
4
Use   or   to select items.  Use  or  to make adjustments for your selection.
Menu
4
Press “Menu”  to open the on-screen display (OSD) menus and press     key to
select main menu . To exit OSD, press the “ Menu” button again. The projector will save
any changes you made automatically.
Freeze
4
Press the “Freeze” button to...

14
English
4The Projector has a multilingual On-Screen Display(OSD) menus that allow you
to make image adjustments and change a variety of settings. In computer
source, the OSD will be the “Computer OSD”. In video source, the OSD will
be the “ Video OSD”. The projector will detect the source automatically.
4To open the OSD menu, press the “Menu” button on the Remote Control or Panel
 Control.
4When OSD is displayed, press     key to select main menu.
E.g.:Image-I...

15
English
4Brightness
Adjusting the brightness of the image.
Press the    to darken the image.
Press the    to lighten the image.
4Contrast
The contrast controls the degree of difference between the lightest and darkest parts of  the
picture. Adjusting  the contrast changes the amount of black and white in the image.
Press the    to decrease the contrast.
Press the    to increase the contrast.
4Color Temperature
Adjust the color temperature. The range is from 6500K to 9000K . The factory default is...

16
English
4Brightness
Adjusting the brightness of the image.
Press the    to darken the image.
Press the    to lighten the image.
4Contrast
The contrast controls the degree of difference between the lightest and darkest parts of  the
 picture. Adjusting  the contrast changes the amount of black and white in the image.
Press the    to decrease the contrast.
Press the    to increase the contrast.
4Color
The color setting adjusts a video image from black and white to fully saturated color.
Press the...

17
English
4Frequency
“Frequency” is for changing the display data frequency to match the frequency of your
computer’s graphic card. When you experience a vertical flickering bar, use this function to
make an adjustment.

Tracking
Choose “ Tracking” item to synchronize the signal timing of the display with that of the
graphic card. When you experience an unstable or flickering image, use this function to
correct it.

16 : 9 / 4 : 3
    
You can select this function to fit your desired aspect ratio type....

18
English
Audio Image-IImage-II LanguageManagement
Keystone
16:9 / 4:3Color Temp.
Reset
YesNo
Video mode
Image-II (Video mode)
4Keystone Correction
Adjust image distortion caused by tilting the projector. (±16 degrees)

16 : 9 / 4 : 3
     You can select this function to fit your desired aspect ratio type.

Color Temperature
Adjust the color temperature. The range is from 6500K to 9000K . The factory default is
7750K . With the higher temperature, the screen looks colder; with the lower temperature,
the...

19
English
4Volume
 Press the    to decrease the volume.
 Press the    to increase the volume.
4Treble
The treble setting controls the higher frequencies of your audio source.
 Press the    to decrease the treble.
 Press the    to increase the treble.
4Bass
The Bass setting controls the lower frequencies of your audio source.
 Press the    to decrease the bass.
 Press the    to increase the bass.
4Stereo / Mono
 Mono  : Mono sound effect.
 Stereo  : Stereo sound effect.
4Mute
 Choose the left...

20
English
4Menu Location
Choose the Menu location on the display screen.
4Projection
Front-Desktop
The factory default setting.
Rear-Desktop
When you select this function, the projector reverses the image so you can project behind a
 translucent screen.
Front-Ceiling
When you select this function, the projector turns the image upside down for ceiling-
mounted projection.
Rear-Ceiling
When you select this function, the projector reverses and turns the image upside down at
same time. You can project...