Acer Projector Pd310 User Manual

							11
English
. x a M 5 2 8 9 3 2 1 7 9 1 6 4 2 0 0 3
. n i M0 22 82 0 13 6 14 0 25 4 2
) H x W ( . x a M 0 . 5 1 x  0 . 0 2 8 . 8 5 x  4 . 8 7 8 . 3 7 x  4 . 8 9 2 . 8 1 1 x  6 . 7 5 1 6 . 7 4 1 x  8 . 6 9 1 0 . 0 8 1 x  0 . 0 4 2
) H x W ( . n i M0 . 2 1 x  0 . 6 12 . 9 4 x  6 . 5 62 . 1 6 x  6 . 1 88 . 7 9 x  4 . 0 3 14 . 2 2 1 x  2 . 3 6 10 . 7 4 1 x  0 . 6 9 1
 3 . 3 1 . 3 1 4 . 6 1 2 . 6 2 8 . 2 3 4 . 9 3
You may adjust zoom ring to zoom in / out.  Rotate the zoom ring counter-clockwise
to zoom in and clockwise to zoom out.  To focus the image, rotate the  focus ring
until the image is clear. The projector will focus at distances from 3.3 feet to 39.4
feet (1m to 12m).

Adjusting the Projector Zoom / Focus

Adjusting Projection Image Size
Focus Ring
Zoom Ring
*This graph is for user’s reference only.
Screen
(Diagonal)
Distance Screen
Size 
						

							12
English
Panel Control & Remote Control
There are two ways for you to control the function: Remote Control and
Panel Control.
User Controls
Power / Standby
4
Refer to the “Power On/Off the Projector” section on page 8~9.
Source
4
Press “Source” to choose RGB, Digital RGB, S-Video and Composite sources.
Reset
4
When you press the “Reset” button, the OSD menus displays a message “Reset All Yes/NO
 ? ”. Select “Yes” to confirm or select “ No” to cancel.This function will reset all user
adjustable parameters to factory default settings.
Resync
Use the Remote Control
4Automatically synchronizes the projector to the input source.
Remote Control
Panel Control 
						

							13
English
Use the Panel Control
4Automatically synchronizes the projector to the input source, when you press this button
while the OSD isn’t displayed.
Four Directional Select Keys
4
Use   or   to select items.  Use  or  to make adjustments for your selection.
Menu
4
Press “Menu”  to open the on-screen display (OSD) menus and press     key to
select main menu . To exit OSD, press the “ Menu” button again. The projector will save
any changes you made automatically.
Freeze
4
Press the “Freeze” button to still the screen image.
Mute
4
Use to mute sound.
Volume
4
To increase the volume, press 
4To decrease the volume, press 
Keystone +/-
4Adjust image distortion caused by tilting the projector. (±16 degrees)
Zoom In (Computer mode only)
4
Magnifies an image up to a factor of 32 times on the projection screen.
Zoom Out (Computer mode only)
4
Diminishes the zoom in image.
Enter
Use the Remote Control
4Press “Enter” to confirm your selection.
Use the Panel Control
4Confirm your selection of items, when you press this button while the OSD is displayed. 
						

							14
English
4The Projector has a multilingual On-Screen Display(OSD) menus that allow you
to make image adjustments and change a variety of settings. In computer
source, the OSD will be the “Computer OSD”. In video source, the OSD will
be the “ Video OSD”. The projector will detect the source automatically.
4To open the OSD menu, press the “Menu” button on the Remote Control or Panel
 Control.
4When OSD is displayed, press     key to select main menu.
E.g.:Image-I

Image-II
Audio
Language
Management
Image-I...
While making selection on a particular page, press “Enter” key to go into
sub-menu.
4Press      key to select the required item and adjust the settings by    
 key.  When a specified item is selected, the color of the item will change from
yel lowish brown to blue.
E.g.:Brightness

Contrast
Color Temp.
Zoom
Keystone
Brightness...
4While using      key to adjust the parameter or required function in the items
of the submenu, confirm all the functions of the main menu by pushing “Enter”
button after all/part of the items have been modified.  Press “Enter” button to
confirm, and the screen will be back to the main menu at once.  Only  
  
key  is enabled now.
4To exit the OSD, press the “Menu” button again.
On-Screen Display Menus
How to operate 
						

							15
English
4Brightness
Adjusting the brightness of the image.
Press the    to darken the image.
Press the    to lighten the image.
4Contrast
The contrast controls the degree of difference between the lightest and darkest parts of  the
picture. Adjusting  the contrast changes the amount of black and white in the image.
Press the    to decrease the contrast.
Press the    to increase the contrast.
4Color Temperature
Adjust the color temperature. The range is from 6500K to 9000K . The factory default is
7750K . With the higher temperature, the screen looks colder; with the lower temperature,
the screen looks warmer.
4Zoom
Press the    to Magnify an image up to a factor of 32 times on the projection screen.
Press the    to Diminish the zoom in image.
4Keystone (Keystone Correction)
Adjust image distortion caused by tilting the projector. (±16 degrees)
Image-I (Computer mode)
Audio Image-IImage-II LanguageManagement
Brightness
Contrast
Color Temp.Zoom
Keystone
Computer mode   
						

							16
English
4Brightness
Adjusting the brightness of the image.
Press the    to darken the image.
Press the    to lighten the image.
4Contrast
The contrast controls the degree of difference between the lightest and darkest parts of  the
 picture. Adjusting  the contrast changes the amount of black and white in the image.
Press the    to decrease the contrast.
Press the    to increase the contrast.
4Color
The color setting adjusts a video image from black and white to fully saturated color.
Press the    to decrease the amount of color in the image.
Press the    to increase the amount of color in the image.
4Tint
 The tint adjusts the color balance of red and green.
 Press the    to increase the amount of green in the image.
 Press the    to increase the amount of red  in the image.
4Sharpness
Adjusting the sharpness of the image.
Press the    to decrease the sharpness.
Press the    to increase the sharpness.
Video mode
Audio Image-IImage-II LanguageManagement
Brightness
Contrast
ColorTint
Sharpness
Image-I (Video mode)   
						

							17
English
4Frequency
“Frequency” is for changing the display data frequency to match the frequency of your
computer’s graphic card. When you experience a vertical flickering bar, use this function to
make an adjustment.

Tracking
Choose “ Tracking” item to synchronize the signal timing of the display with that of the
graphic card. When you experience an unstable or flickering image, use this function to
correct it.

16 : 9 / 4 : 3
    
You can select this function to fit your desired aspect ratio type.
4Horizontal Position
 Press the    to move the image left.
 Press the    to move the image right.
4Vertical Position
 Press the    to move the image up.
 Press the    to move the image down.
4Reset
Choose “ Yes” to return the display parameters of the current mode to its factory default
settings.
*Reset items include both Image-I and Image-II settings.
Image-II (Computer mode)
Audio Image-IImage-II LanguageManagement
Frequency
Tracking
16:9 / 4:3H. Position
V. Position
Reset
YesNo
Computer mode   
						

							18
English
Audio Image-IImage-II LanguageManagement
Keystone
16:9 / 4:3Color Temp.
Reset
YesNo
Video mode
Image-II (Video mode)
4Keystone Correction
Adjust image distortion caused by tilting the projector. (±16 degrees)

16 : 9 / 4 : 3
     You can select this function to fit your desired aspect ratio type.

Color Temperature
Adjust the color temperature. The range is from 6500K to 9000K . The factory default is
7750K . With the higher temperature, the screen looks colder; with the lower temperature,
the screen looks warmer.

Reset
Choose “ Yes” to return the display parameters of the current mode to its factory default
settings.
*Reset items include both Image-I and Image-II settings.   
						

							19
English
4Volume
 Press the    to decrease the volume.
 Press the    to increase the volume.
4Treble
The treble setting controls the higher frequencies of your audio source.
 Press the    to decrease the treble.
 Press the    to increase the treble.
4Bass
The Bass setting controls the lower frequencies of your audio source.
 Press the    to decrease the bass.
 Press the    to increase the bass.
4Stereo / Mono
 Mono  : Mono sound effect.
 Stereo  : Stereo sound effect.
4Mute
 Choose the left icon to make the volume function ineffective.
 Choose the right icon to make the volume function effective.
Audio
Language
4Language
You can display the multilingual OSD menu . Use the    and    key to select the
 language you prefer.
Computer / Video mode
Audio Image-I Image-IILanguageManagement
Volume
Treble
BassStereo / Mono
Mute
Computer / Video mode
Audio Image-I Image-II
LanguageManagement         
						

							20
English
4Menu Location
Choose the Menu location on the display screen.
4Projection
Front-Desktop
The factory default setting.
Rear-Desktop
When you select this function, the projector reverses the image so you can project behind a
 translucent screen.
Front-Ceiling
When you select this function, the projector turns the image upside down for ceiling-
mounted projection.
Rear-Ceiling
When you select this function, the projector reverses and turns the image upside down at
same time. You can project from  behind a translucent screen with ceiling mounted
projection.
4Signal Type
Select signal type between RGB, HDTV and Component video sources.
4Lamp Reminding
Choose this function to show or hide the warning message when the changing lamp message
 is displayed.  The message will show up 30 hours before end of life.
4Lamp Reset
Reset the lamp setting only when the new lamp is replaced.
Management
Computer / Video mode
Audio Image-I Image-II
LanguageManagement
Menu Location
Projection
Signal TypeLamp Reminding
Lamp Reset
RGB HDTVComponent