Acer Projector Pd310 User Manual

1
English
Usage Notice
Precautions........................................................................................... 2
Introduction
Product Features................................................................................... 3
Package Overview................................................................................ 4
Product Overview................................................................................. 5
Installation
Connecting the Projector...

2
English
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user’s manual to maximize the life of your unit.
Do:

Turn off the product before cleaning.

Use a soft cloth moistened with mild detergent to clean the display housing.

Disconnect the power plug from AC outlet if the product is not being used for a
long period of time.
Don’t:

Block the slots and openings on the unit provided for ventilation.

Use abrasive cleaners, waxes or solvents for your cleaning.

Use...

3
English
Product Features
This product is a SVGA single chip 0.7” DLP  Projector. The outstanding
features of it are listed as follows:

True SVGA, 800 x 600 addressable pixels

3.3 lbs. (1.5 kgs) lightweight compact design

Single chip DLP technology

XGA compression and VGA, SVGA re-sizing

130 Watts user replaceable P-VIP lamp

Mac/NEC PC-98/FM Towns compatible

NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and HDTV (720P,480i/P)
compatible

Full function remote control

High definition TV compatibility...

4
English
Package Overview
This projector comes with all the items shown below.  Check to make sure
your unit is complete.  Contact your dealer immediately if anything is
missing.
Projector
Power Cord
S-Video CableAudio CableVGA Signal Cable
Remote Control Carrying CaseComposite Video Cable
RCA to D-Sub Cable
Quick Start CardBattery x 2User’s Guide       

5
English
Product Overview
Speaker
Focus Ring
Remote Control
Receiver
Zoom Ring
Zoom Lens
Power Connector
Elevator Button
Connection Ports
HDTV/Component
 Video & Computer
Input Connector
S-video Input
Connector Audio Input
Connector
Composite Video
Input Connector
Panel Control
Power On / Standby Menu
(On/Off)Enter /
Resync Source
Four Directional
Select Keys
Mute VolumeLamp
Warning LED
Main Unit
 Panel Control
Temperature
Warning LED 

6
English
Remote Control
Source
Resync Reset
Freeze
Keystone CorrectionPower / Standby
Volume ( + / - ) Mute
Four Directional
Select Keys
Enter Menu
Zoom In / Zoom Out 

7
English
Connecting the Projector
Installation

To ensure the projector works well with your computer, please configure the
display mode of your graphic card to make it less than or equal to 800 X 600
resolution. Make sure timimg of the display mode is compatible with the
projector. Refer to the“Compatibility Modes”section on page 26.
Power Cord
S-Video Output
S-Video
Cable
Video Output
Audio Output VGA Signal Cable
RGB Port
RGB Port
RCA to D-Sub Cable
Composite Video Cable
RCA Audio Cable VGA Signal...

8
English

Powering On the Projector
1. Remove the lens cap.

2. Ensure that the power cord and signal cable are securely connected.
3. The “Power/Standby” indicator will flash. And press the “Power/Standby”
button again to start on your projector. The  startup screen will display and
count down for 20 seconds and the Power/ Standby indicator will light solid
amber.
4. Turn on your source (computer, notebook, or video player ,etc.). The projec-
tor will detect your source automatically.
* If the screen...

9
English

Powering Off the Projector
1. Press the “Power/Standby” button to turn off the projector lamp.
2. After pressing the “Power/Standby” button, you will see a message “Power off
the lamp?” on the on-screen display. Press the “Power/Standby” button again to
confirm. Otherwise the message will disappear after 5 seconds.
3. “Power/Standby” LED indicator will flash amber for about 30 seconds.
4. Disconnect the power cord from the electrical outlet and the projector.
* When the “LAMP” indicator lights...

10
English
Adjusting the Projected Image

Adjusting the Projector Height
The projector is equipped with an elevator foot for adjusting the projector height.
To raise the projector:
1. Press the elevator button 
.
2. Raise the projector to the desired display angle 
, then release the button to
lock the elevator foot into position.
3. Use 
 to fine-tune height adjustment.
To lower the projector:
1. Press the elevator button.
2. Lower down the projector, then release the button to lock the elevator foot...