Acer Projector P6600 User Manual

21
EnglishHow to get a preferred image position by adjusting 
lens shift
The projector is equipped with lens shift for adjusting the position of projected 
image up and down without requiring you to physically move the projector.
Note: The figures shown in this section are for reference only not 
approximate value. The figures between units can be different 
due to  assembly tolerance.
ZOOMFOCUSLENS SHIFT
SOURCEMENUMODERE
SYNCLAMP
TEMP
ZOOMFOCUS
LENS SHIFTVertical Lens 
Shift ring 

22
English
P6200/P6200S Series:
The vertical height can be adjusted between -2% and 15% of the image height.
(The typical vertical image offset is fixed at 15% of the image height above the 
center of the projector lens.)
P6500 Series:
The vertical height can be adjusted between -1% and 16% of the image height.
(The typical vertical image offset is fixed at 16% of the image height above the 
center of the projector lens.)
P6600 Series:
The vertical height can be adjusted between -6% and 7% of the image...

23
EnglishUser Controls
Installation menu
The installation menu provides an onscreen display (OSD) for projector 
installation and maintenance. Use the OSD only when the message No signal 
input is displayed on the screen. 
The menu options include settings and adjustments for screen size and distance, 
focus, keystone correction and more .
1 Turn on the projector by pressing Power button on the control pad.
2 Press the MENU button on the remote control to launch the OSD for 
projector installation and...

24
English
•Reset to factory default function
Use the up and down arrow keys to select an option, the left and right 
arrow keys to adjust selected option settings, and the right arrow key to 
enter a submenu for feature setting. The new settings will be saved 
automatically upon exiting the menu.
5 Push the MENU button anytime to exit the menu and return to the Acer 
welcome screen.
Note: Functions vary depending on model definition. 

25
EnglishOnscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments 
and change a variety of settings.
Using the OSD menus
•To open the OSD menu, press MENU on the remote control or control 
panel.
•When the OSD is displayed, use the   keys to select any item in the 
main menu. After selecting the desired main menu item, press   to enter 
submenu for feature setting.
•Use the   keys to select the desired item and adjust the settings by 
using the   keys....

26
English
Color
LumiSense+The light sensor of LumiSense+ technology can intelligently 
optimize the brightness and color saturation of projected image 
based on actual ambient light. The feature greatly enhances dark 
detail visibility and color saturation.
•Off: For normal mode. (ambient light sensor is off)
•Auto Bright: Light sensor is on to automatically detect 
ambient light and optimize the brightness and color 
saturation of projected image.
•Dynamic Black:automatically optimize the display of...

27
English
Note: Saturation and Tint functions are not supported under computer 
or HDMI mode.
Note: Functions vary depending on model definition.
TintAdjusts the color balance of red and green.
•Press   to increase the amount of green in the image.
•Press   to increase the amount of red in the image.
Color 
TemperatureMode
Use this function to choose CT1, CT2 (Native), CT3, User mode.
R Gain
Adjusts the red gain for color temperature optimization.
G Gain
Adjusts the green gain for color temperature...

28
English
Image
Projection
• Front-Desktop: The factory default setting.
• Rear-Desktop: When you select this function, the projector 
reverses the image so you can project from behind a translucent 
screen.
• Rear-Ceiling: When you select this function, the projector 
reverses and inverts the image at same time. You can project from 
behind a translucent screen with ceiling mounted projection.
• Front-Ceiling: When you select this function, the projector 
inverts the image for ceiling-mounted...

29
English
Note: H. Position, V. Position, Frequency and Tracking functions 
are not supported under HDMI or Video mode.
Note: HDMI Color Range and HDMI Scan Info functions are only 
supported under HDMI mode.
Note: Functions vary depending on model definition. H. Position 
(Horizontal 
position)
•Press   to move the image left.
•Press   to move the image right.
V. Position 
(Vertical position)
•Press   to move the image down.
•Press   to move the image up.
Frequency Frequency changes the projectors...

30
English
Setting
Startup Screen Use this function to select your desired startup screen. If you 
change the setting, the changes will take effect when you exit the 
OSD menu.
• Acer: The default startup screen of your Acer projector.
• User: Use memorize picture from Screen Capture function.
Screen Capture Use this function to customize the startup screen. To capture the 
image that you want to use as the startup screen, follow the 
instructions below.
Notice:
Before proceeding with the following...