Acer Projector P6600 User Manual
Have a look at the manual Acer Projector P6600 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 EnglishHow to get a preferred image position by adjusting lens shift The projector is equipped with lens shift for adjusting the position of projected image up and down without requiring you to physically move the projector. Note: The figures shown in this section are for reference only not approximate value. The figures between units can be different due to assembly tolerance. ZOOMFOCUSLENS SHIFT SOURCEMENUMODERE SYNCLAMP TEMP ZOOMFOCUS LENS SHIFTVertical Lens Shift ring
22 English P6200/P6200S Series: The vertical height can be adjusted between -2% and 15% of the image height. (The typical vertical image offset is fixed at 15% of the image height above the center of the projector lens.) P6500 Series: The vertical height can be adjusted between -1% and 16% of the image height. (The typical vertical image offset is fixed at 16% of the image height above the center of the projector lens.) P6600 Series: The vertical height can be adjusted between -6% and 7% of the image height. (The typical vertical image offset is fixed at 7% of the image height above the center of the projector lens.) OffsetP6200/P6200S P6500 P6600 max [A] min [B] max [A] min [B] max [A] min [B] V 15% -2% 16% -1% 7% -6% H V V SOURCEMENUMODERESYNCLAMP TEMP FOCUS LENS SHIFT ZOOM Offset max=V x [A] Offset min=V x [B]
23 EnglishUser Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message No signal input is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 Turn on the projector by pressing Power button on the control pad. 2 Press the MENU button on the remote control to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more . 4 The Installation menu includes the following options: •Projection method •Projection •Projection Location •Auto Keystone settings •Manual Keystone settings •H. Keystone •V. Keystone •LAN/WiFi •LAN •LAN IP/Mask •Wireless HD dongle settings •Language settings •DC 5V Out (Standby)
24 English •Reset to factory default function Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. 5 Push the MENU button anytime to exit the menu and return to the Acer welcome screen. Note: Functions vary depending on model definition.
25 EnglishOnscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus •To open the OSD menu, press MENU on the remote control or control panel. •When the OSD is displayed, use the keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting. •Use the keys to select the desired item and adjust the settings by using the keys. •Select the next item to be adjusted in the submenu and adjust as described above. •Press MENU on the remote control or control panel, the screen will return to the main menu. •To exit OSD, press MENU on the remote control or control panel. The OSD menu will close and the projector will automatically save the new settings. Note: Some of the following OSD settings may not be available. Please refer to the actual OSD of your projector. Note: Functions vary depending on model definition. Main menu Sub menuSetting
26 English Color LumiSense+The light sensor of LumiSense+ technology can intelligently optimize the brightness and color saturation of projected image based on actual ambient light. The feature greatly enhances dark detail visibility and color saturation. •Off: For normal mode. (ambient light sensor is off) •Auto Bright: Light sensor is on to automatically detect ambient light and optimize the brightness and color saturation of projected image. •Dynamic Black:automatically optimize the display of dark movie scenes enabling them to be shown in incredible detail. Display ModeThere are many factory presets optimized for various types of images. •Bright: For brightness optimization. •Presentation: For meeting presentation. •Standard: For common environment. •Video: For playing video in a bright environment. •Game: For game content. •Education: For education environment. •Movie: For brighter and general movie/video/photo playing. •Dark Cinema: For dark movie content. •Sport: For sport picture. •User: Memorize users settings. Wall colorUse this function to choose a proper color according to the wall. There are several choices, including white, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone. BrightnessAdjust the brightness of the image. •Press to darken the image. •Press to lighten the image. ContrastContrast controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. •Press to decrease the contrast. •Press to increase the contrast. SaturationAdjusts a video image from black and white to fully saturated color. •Press to decrease the amount of color in the image. •Press to increase the amount of color in the image.
27 English Note: Saturation and Tint functions are not supported under computer or HDMI mode. Note: Functions vary depending on model definition. TintAdjusts the color balance of red and green. •Press to increase the amount of green in the image. •Press to increase the amount of red in the image. Color TemperatureMode Use this function to choose CT1, CT2 (Native), CT3, User mode. R Gain Adjusts the red gain for color temperature optimization. G Gain Adjusts the green gain for color temperature optimization. B Gain Adjusts the blue gain for color temperature optimization. R Bias Adjusts the red bias for color temperature optimization. G Bias Adjusts the green bias for color temperature optimization. B Bias Adjusts the blue bias for color temperature optimization. GammaEffects the representation of dark scenery. With greater gamma value, dark scenery looks brighter.
28 English Image Projection • Front-Desktop: The factory default setting. • Rear-Desktop: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear-Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. • Front-Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. Aspect Ratio Use this function to choose your desired aspect ratio. •Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. •Full: Resize image to fit full screen by width (1280 pixels) and height (800 pixels). •4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. •16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. •L.Box: Keep original signal aspect ratio and zoom in by 1.333 times. H./V. Keystone Auto V. Keystone Automatically adjusts vertical image. H. Keystone Press the or button to adjust image distortion horizontally and makes a squarer image. V. Keystone Press the or button to adjust image distortion vertically and makes a squarer image. 4 Corner CorrectionManually adjusts the shape and size of an image that is unevenly rectangular on all sides. Press MODE repeatedly to select the corner that you wish to adjust. Press four directional selection keys to adjust the image shape. The function is unavailable when H./ V. Keystone is adjusted. Sharpness Adjusts the sharpness of the image. •Press to decrease the sharpness. •Press to increase the sharpness.
29 English Note: H. Position, V. Position, Frequency and Tracking functions are not supported under HDMI or Video mode. Note: HDMI Color Range and HDMI Scan Info functions are only supported under HDMI mode. Note: Functions vary depending on model definition. H. Position (Horizontal position) •Press to move the image left. •Press to move the image right. V. Position (Vertical position) •Press to move the image down. •Press to move the image up. Frequency Frequency changes the projectors refresh rate to match the frequency of your computer’s graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments. Tracking Synchronizes the signal timing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it. HDMI Color Range Adjust the color range of the HDMI image data to correct color display error. •Auto: Automatically adjust by information from player. •Limited Range: Prosess the input image as limited color range data. •Full Range: Prosess the input image as full color range data. HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen. •Auto: Automatically adjust by information from player. •Underscan: Always no overscan on HDMI image. •Overscan: Always keep overscan on HDMI image.
30 English Setting Startup Screen Use this function to select your desired startup screen. If you change the setting, the changes will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use memorize picture from Screen Capture function. Screen Capture Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice: Before proceeding with the following steps, make sure that the Keystone is set to the default value 0 and the aspect ratio is set to 4:3. For details, refer to the Image section. • Change the Startup Screen from the default setting Acer to User. • Press Screen Capture to customize the startup screen. • A dialog box appears to confirm the action. Choose Yes to use the current image as your customized startup screen. The capture range is the red rectangular area. Choose No to cancel the screen capture and exit the onscreen display (OSD). • A message appears, stating that the screen capture is in progress. • When the screen capture is finished, the message disappears and the original display is shown. • The customized startup screen, as shown below, takes effect when there is a new input signal or when you restart the projector. Source Lock When Source Lock is turned Off, the projector will search for other signals if the current input signal is lost. When Source Lock is turned On, it will lock the current source channel unless you press Source button on the remote control for the next channel. Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area). Select Off to turn off the captioning feature. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC. Set your screen aspect ratio to 4:3. This function is not available when the aspect ratio is 16:9 or Auto . Auto Screen Default is On, the down/up move of electronic screen will be related with power on/off of the projector. VGA OUT (Standby) Default is Off. Choose On to enable VGA OUT connection. DC 5V Out (Standby) Default is Off. Choose On to enable DV 5V OUT connection during standby mode. HDMI CEC Default is Off. Select “On” to enable HDMI CEC function. Reset •Press the button and choose Yes to return the parameters on all menus to the factory default settings.