Acer H9500 Users Guide

21
EnglishOnscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments 
and change a variety of settings.
Using the OSD menus
•To open the OSD menu, press MENU on the remote control or control 
panel.
•When the OSD is displayed, use the   keys to select any item in the 
main menu. After selecting the desired main menu item, press   to enter 
submenu for feature setting.
•Use the   keys to select the desired item and adjust the settings by 
using the   keys....

22
English
Color
Display ModeThere are many factory presets optimized for various types of 
images.
•Bright: For brightness optimization.
•Presentation: For meeting presentation with higher 
brightness.
•Standard: For common environment.
•Movie: For brighter and general movie/video/photo playing.
•Dark Cinema: For dark movie content.
•Game: For game content.
•Sports: For sport picture.
•User: Memorize user’s settings.
Wall ColorUse this function to choose a proper color according to the wall. 
There are...

23
English
Note: Saturation, Tint and Noise Reduction functions are not 
supported under computer mode or HDMI mode.
Note: HDMI Color Range function is only supported under HDMI mode.
AdvancedNoise Reduction
Adjusts signal noise reduction.0 means the noise reduction is off, 
>0 increase noise reduction.
Sharpeness
Adjusts the sharpness of the image.
•Press   to decrease the sharpness.
•Press   to increase the sharpness.
Brilliant Color
Produces an expanded on-screen color spectrum that delivers 
enhanced...

24
English
Note: AcuMotion may not work under some conditions: while 3D function is 
on and the the frame rate is not HDMI 1.4a 1080@24P frame packing and 
3D HQFS timings.
Note: The setting High in Dynamic Black may cause brightness flickers 
while playing big brightness dynamic range video contents.
Image
Projection Front-Desktop
•The factory default setting.
Front-Ceiling
•When you select this function, the projector inverts the image for 
ceiling-mounted projection.
Rear-Desktop
•When you select this...

25
English
Note: H. Position, V. Position, Frequency and Tracking functions 
are not supported under HDMI, DVI or Video mode.
Note: HDMI Scan Info function is only supported under HDMI mode.
Note: Depth and Convergence are only supported under User mode.
Note: 3D Format is not supported under Computer or Video mode.
Note: It needs correct settings on graphic card 3D application program for 
correct 3D display. V. Position 
(Vertical position)
•Press   to move the image down.
•Press   to move the image...

26
English
Note: The SW players, such as Stereoscopic Player and DDD TriDef Media 
Player can support 3D format files. You can download these three players 
on web page below,
- Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx
- DDD TriDef Media Player (Trial): 
http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html
Note: 3D Sync Invert and 3D Foramt are only available when 3D is 
enabled.
Note:  There has reminder screen if 3D still enable when power on projector. 
Please...

27
EnglishManagement
ECO Mode Choose On to dim the projector lamp which will lower power 
consumption, extend the lamp life and reduce noise. Choose Off 
to return normal mode.
High Altitude Choose On to turn on High Altitude mode. Operate the fans at 
full speed continuously to allow for proper high altitude cooling of 
the projector.
Turn Off Mode • Standard: Properly shuts down the projector after fan cooling.
• Instant Resume: Resumes the system when the Power button is 
pressed again within 2...

28
English
Setting
Menu Location Choose the menu location on the display screen.
Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3, 
CC4, (CC1 displays captions in the primary language in your area).
Select Off to turn off the captioning feature. This function is only 
available when a composite video or S-Video input signal is 
selected and its system format is NTSC.
 Set your screen aspect ratio to 4:3. This function is not 
available when the aspect ratio is 16:9 or Auto....

29
English
Note: When PIP function is activated, zoom and keystone function 
is unavailable.
Note: PIP,  PIP Source, PIP Location and PIP Size functions 
are only supported under HDMI or DVI mode.
User password
•Press   to setup or change the User Password.
•Press number keys to set your password on the remote control 
and press MENU to confirm. 
•Press   to delete character.
•Enter the password when you see Confirm Password 
displayed.
•The password should be between 4 and 8 characters long.
•If you...

30
English
Timer
Language
Timer Location•Choose the location of the timer on the screen.
Timer Start
•Press   to start or stop the timer.
Timer Period
•Press   or   to adjust the timer period.
Timer Display
•Press   or   to which timer mode to display on the 
screen.
Language
Choose the multilingual OSD menu. Use the or key 
to select your preferred menu language.
•Press   to confirm the selection.
Downloaded From projector-manual.com Acer Manuals