Acer H9500 Users Guide

							21
EnglishOnscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments 
and change a variety of settings.
Using the OSD menus
•To open the OSD menu, press MENU on the remote control or control 
panel.
•When the OSD is displayed, use the   keys to select any item in the 
main menu. After selecting the desired main menu item, press   to enter 
submenu for feature setting.
•Use the   keys to select the desired item and adjust the settings by 
using the   keys.
•Select the next item to be adjusted in the submenu and adjust as described 
above.
•Press MENU on the remote control or control panel, the screen will 
return to the main menu.
•To exit OSD, press MENU on the remote control or control panel again. 
The OSD menu will close and the projector will automatically save the new 
settings.
Main menu
Sub menuSetting
Downloaded From projector-manual.com Acer Manuals 
						

							22
English
Color
Display ModeThere are many factory presets optimized for various types of 
images.
•Bright: For brightness optimization.
•Presentation: For meeting presentation with higher 
brightness.
•Standard: For common environment.
•Movie: For brighter and general movie/video/photo playing.
•Dark Cinema: For dark movie content.
•Game: For game content.
•Sports: For sport picture.
•User: Memorize user’s settings.
Wall ColorUse this function to choose a proper color according to the wall. 
There are several choices, including white, light yellow, light blue, 
pink, dark green. It will compensate the color deviation due to the 
wall color to show the correct image tone.
BrightnessAdjust the brightness of the image.
•Press   to darken image.
•Press   to lighten the image.
ContrastContrast controls the difference between the lightest and 
darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the image.
•Press   to decrease the contrast.
•Press   to increase the contrast.
Color 
TemperatureAdjust the color temperature. At higher color temperatures, the 
screen looks colder; at lower color temperatures, the screen looks 
warmer.
DegammaEffects the representation of dark scenery. With greater gamma 
value, dark scenery will look brighter.
AcuMotionActivate AcuMotion to provide a smoother image when viewing 
video content.
Downloaded From projector-manual.com Acer Manuals 
						

							23
English
Note: Saturation, Tint and Noise Reduction functions are not 
supported under computer mode or HDMI mode.
Note: HDMI Color Range function is only supported under HDMI mode.
AdvancedNoise Reduction
Adjusts signal noise reduction.0 means the noise reduction is off, 
>0 increase noise reduction.
Sharpeness
Adjusts the sharpness of the image.
•Press   to decrease the sharpness.
•Press   to increase the sharpness.
Brilliant Color
Produces an expanded on-screen color spectrum that delivers 
enhanced color saturation for bright, true-to-life images. This 
feature is On by default.
Dynamic Black
This feature enables the projector to automatically optimize the 
display of dark movie scenes enabling them to be shown in 
incredible detail.
Color 
ManagementColor R
Adjusts the red color.
Color G
Adjusts the green color.
Color B
Adjusts the blue color.
Color C
Adjusts the cyan color.
Color M
Adjusts the magenta color.
Color Y
Adjusts the yellow color.
Skin Color
Adjusts the skin color.
HDMI Color Range
Adjust the color range of the HDMI image data to correct color 
display error.
•Auto: Automatically adjust by information from player.
•Limited Range: Prosess the input image as limited color range 
data.
•Full Range: Prosess the input image as full color range data. 
SaturationAdjusts a video image from black and white to fully saturated 
color.
•Press   to decrease the amount of color in the image.
•Press   to increase the amount of color in the image.
TintAdjusts the color balance of red and green.
•Press   to increase the amount of green in the image.
•Press   to increase the amount of red in the image.
Downloaded From projector-manual.com Acer Manuals 
						

							24
English
Note: AcuMotion may not work under some conditions: while 3D function is 
on and the the frame rate is not HDMI 1.4a 1080@24P frame packing and 
3D HQFS timings.
Note: The setting High in Dynamic Black may cause brightness flickers 
while playing big brightness dynamic range video contents.
Image
Projection Front-Desktop
•The factory default setting.
Front-Ceiling
•When you select this function, the projector inverts the image for 
ceiling-mounted projection.
Rear-Desktop
•When you select this function, the projector reverses the image so 
you can project from behind a translucent screen.
Rear-Ceiling
•When you select this function, the projector reverses and inverts 
the image at same time. You can project from behind a 
translucent screen with ceiling mounted projection.
Aspect Ratio  Use this function to choose your desired aspect ratio.
•Auto: Keep the image with original width-higth ratio and maxi 
mize the image to fit native horizontal or vertical pixels.
•4:3: The image will be scaled to fit the screen and displayed using 
a 4:3 ratio.
•16:9: The image will be scaled to fit the width of the screen and 
the height adjusted to display the image using a 16:9 ratio.
•L. Box: Keep original signal aspect ratio and zoom in by 1.333 
times.
Keystone Adjust image distortion caused by tilting projection. (±15 degrees)
H. Position 
(Horizontal 
position)
•Press   to move the image left.
•Press   to move the image right.
Downloaded From projector-manual.com Acer Manuals 
						

							25
English
Note: H. Position, V. Position, Frequency and Tracking functions 
are not supported under HDMI, DVI or Video mode.
Note: HDMI Scan Info function is only supported under HDMI mode.
Note: Depth and Convergence are only supported under User mode.
Note: 3D Format is not supported under Computer or Video mode.
Note: It needs correct settings on graphic card 3D application program for 
correct 3D display. V. Position 
(Vertical position)
•Press   to move the image down.
•Press   to move the image up.
Frequency Frequency changes the projectors refresh rate to match the 
frequency of your computer’s graphics card. If you can see a vertical 
flickering bar in the projected image, use this function to make the 
necessary adjustments.
Tracking Synchronizes the signal timing of the projector with the graphics card. 
If you experience an unstable or flickering image, use this function to 
correct it.
HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen.
•Auto: Automatically adjust by information from player.
•Underscan: Always no overscan on HDMI image.
•Overscan: Always keep overscan on HDMI image.
2D to 3D 2D to 3D
Support most of the 2D contents.
Choose On to enable 2D to 3D function  supported by DLP 3D 
technology. Please use DLP 3D glasses to have correct performance.
Mode
Choose mode of Photo, Movie,  Jump-Out and User as your 
prefered 3D setting.
Convergence
Choose convergrence effect of Inward, Middle and Outword as 
your preferred 3D setting in User mode.
Depth
Choose depth effect of Low, Middle and Strong as your 
prefered 3D setting in User mode.
3D Choose On to enable DLP 3D function.
•On: Choose this item while using DLP 3D glasses, quad buffer 
(NVIDIA/ATI...)  graphic card and HQFS format file or DVD with 
corresponding SW player.
•Off: Turn off 3D mode.
3D Format Adjust the 3D format to display 3D content correctly.
3D Sync Invert If you see a discrete or overlapping image while wearing DLP 3D 
glasses, you may need to execute Invert to get best match of left/
right image sequence to get the correct image (for DLP 3D).
3D Warning 
MessageChoose Yes to display the 3D warning message.
Downloaded From projector-manual.com Acer Manuals 
						

							26
English
Note: The SW players, such as Stereoscopic Player and DDD TriDef Media 
Player can support 3D format files. You can download these three players 
on web page below,
- Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx
- DDD TriDef Media Player (Trial): 
http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html
Note: 3D Sync Invert and 3D Foramt are only available when 3D is 
enabled.
Note:  There has reminder screen if 3D still enable when power on projector. 
Please adjust setting depended on your purpose.
Note: Simplified menu under specific 3D condition.
Note: It will takes much time and some garbage screen might happen while 
switching between 2D mode, 3D mode and 2D to 3D mode.
Note: The navigation speed will be slower while navigate in simplified 3D 
menu under specific 3D condition.
Downloaded From projector-manual.com Acer Manuals 
						

							27
EnglishManagement
ECO Mode Choose On to dim the projector lamp which will lower power 
consumption, extend the lamp life and reduce noise. Choose Off 
to return normal mode.
High Altitude Choose On to turn on High Altitude mode. Operate the fans at 
full speed continuously to allow for proper high altitude cooling of 
the projector.
Turn Off Mode • Standard: Properly shuts down the projector after fan cooling.
• Instant Resume: Resumes the system when the Power button is 
pressed again within 2 minutes.
Auto Shutdown The projector will automatically shutdown when there is no signal 
input after the allocated time. (in minutes)
Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding Activate this function to display a reminder to change the lamp 30 
hours before its expected end-of-life.
Lamp Hour Reset
Press the   button and choose Yes to turn the lamp hour 
counter to 0 hours.
Downloaded From projector-manual.com Acer Manuals 
						

							28
English
Setting
Menu Location Choose the menu location on the display screen.
Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3, 
CC4, (CC1 displays captions in the primary language in your area).
Select Off to turn off the captioning feature. This function is only 
available when a composite video or S-Video input signal is 
selected and its system format is NTSC.
 Set your screen aspect ratio to 4:3. This function is not 
available when the aspect ratio is 16:9 or Auto.
SecuritySecurity
This projector provides a useful security function for the 
administrator to manage usage of the projector.
Press   to change the Security setting. If the security function 
is enabled, your must enter the Administrator Password first 
before changing the security settings.
•Select On to enable the security function. The user has to 
enter a password to operate the projector. Please refer to the 
User Password section for details.
•If Off is selected, then the user can turn on the projector 
without password.
Timeout(Min.)
Once Security is activated to On, the administrator can set 
timeout function.
•Press   or   to select the timeout interval.
•The range is from 10 minute to 990 minutes.
•When the time is up, the projector will prompt the user to 
enter the password again.
•The factory default setting of Timeout(Min.) is Off.
•Once the security function is enabled, the projector will 
request user to enter password when switch on the projector . 
Both User Password and Administrator Password can be 
accepted for this dialogue.
Note: For 1080P models, to get best quality for you desired image, suggest 
end-user set PC resolution to 1920x1080 before you use this function.
Downloaded From projector-manual.com Acer Manuals 
						

							29
English
Note: When PIP function is activated, zoom and keystone function 
is unavailable.
Note: PIP,  PIP Source, PIP Location and PIP Size functions 
are only supported under HDMI or DVI mode.
User password
•Press   to setup or change the User Password.
•Press number keys to set your password on the remote control 
and press MENU to confirm. 
•Press   to delete character.
•Enter the password when you see Confirm Password 
displayed.
•The password should be between 4 and 8 characters long.
•If you select Request password only when plugging the 
power cord in., the projector will prompt the user to enter 
the password every time the power cord is plugged.
•If you select Always request the password when turning the 
projector on., the user has to enter the password every time 
when the projector is turned on.
Administrator Password
The Administrator Password can be used in both the Enter 
Administrator Password and Enter Password dialog boxes.
•Press   to change the Administrator Password.
•The factory default of Administrator Password is 1234.
If you forgot your administrator password, do the following to 
retrieve the administrator password:
•An unique 6-digit Universal Password which is printed on 
the Security Card (please check accessory in the box). This 
unique password is the number which will be accepted by 
projector anytime no matter what the Administrator 
Password is.
•If losing this security card and number, please contact with an 
Acer service center.
VGA OUT (Standby)
•Default is Off. Choose On to enable VGA OUT 
connection.
Auto Screen
•Default is On, the down/up move of electronic screen will 
be related with power on/off of Projector.
Reset
•Press the   button and choose Yes to return the 
parameters on all menus to the factory default settings.
PIP
•Choose On to see two screens at the same time.
•Choose Off to disable the function.
PIP Source
Press   and   to choose the secondary video source: 
Composite, S-Video or Component signal.
PIP Location Choose the PIP secondary signal location on the display screen.
PIP Size Choose the PIP secondary signal size on the display screen.
Downloaded From projector-manual.com Acer Manuals 
						

							30
English
Timer
Language
Timer Location•Choose the location of the timer on the screen.
Timer Start
•Press   to start or stop the timer.
Timer Period
•Press   or   to adjust the timer period.
Timer Display
•Press   or   to which timer mode to display on the 
screen.
Language
Choose the multilingual OSD menu. Use the or key 
to select your preferred menu language.
•Press   to confirm the selection.
Downloaded From projector-manual.com Acer Manuals